724 REFERENCES Gupta, N. and B. Isaacson, 1998, “Near Real Time In-Service Pipe Component Inspection without Removing Insulation,” The 9th Asia- Pacific Conference on Nondestructive Testing in Conjunction with ASNT’s 1998 Spring Conference and 7th Annual Research Symposium [Anaheim, CA]. American Society for Nondestructive Testing, Columbus, OH, pp. 217-220. Hagemaier, D.J., 1968, “Testing Rocket Engine Materials,” Metal Progress, Vol. 94, No. 2, ASM International, Materials Park, OH, pp. 87-90. Hagemaier, D.J., 1985, “Aerospace Radiography — The Last Three Decades,” [1984 Lester Honor Lecture]. Materials Evaluation, Vol. 43, No. 10, American Society for Nondestructive Testing, Columbus, OH, pp. 1262-1264+. Hagemaier, D.J., 1991, “Nondestructive Testing Developments in the Aircraft Industry,” Materials Evaluation, Vol. 49, No. 12, American Society for Nondestructive Testing, Columbus, OH, pp. 1470-1472, 1474-1476, 1478. Hagemaier, D.J. and A. Barath, 1960, “Mobile Field Testing of Missiles and Aircraft,” Symposium on Nondestructive Testing in the Missile Industry [San Francisco, October 1959]. Special Technical Publication 278, ASTM International, West Conshohocken, PA. Hagemaier, D.J. and R. Kleint, 1966, “Cinefluorography of Small Ablative Thrust Chambers during Hot Firing.” Materials Evaluation, Vol. 24, No. 4, American Society for Nondestructive Testing, Columbus, OH, pp. 186-191. Hagemaier, D.J., J. Halchak, and G. Basl, 1969, “Detection of Titanium Hydride by Neutron Radiography,” Materials Evaluation, Vol. 27, No. 9, American Society for Nondestructive Testing, Columbus, OH, pp. 193-198. Hagemaier, D.J., H.J. McFaul, and J.T. Parks, 1970, “Nondestructive Testing Techniques for the Fiberglass, Graphite Fiber and Boron Fiber Composite Aircraft Structures,” Materials Evaluation, Vol. 28, No. 9, American Society for Nondestructive Testing, Columbus, OH, pp. 194-204. Hansche, B.D., 1989, “Film-Based Computed Tomography of Nuclear-Fuel- Damaged Experiments,” Materials Evaluation, Vol. 47, No. 6, American Society for Nondestructive Testing, Columbus, OH, pp. 741-745. Hasenkamp, F.A., 1974, “Radiographic Laminography,” Materials Evaluation, Vol. 32, No. 8, American Society for Nondestructive Testing, Columbus, OH, pp. 169-174, 180. Hastings, C.H. and M.V. Grund, 1961, “Radiographic Inspection of Reinforced Plastics and Resin-Ceramic Composites,” Nondestructive Testing, Vol. 19, No. 5, American Society for Nondestructive Testing, Columbus, OH, pp. 347-351. Hatziandreau, L. and G. Ladopoulos, 1980, “Use of Radiography for Solution of Diagnostic Problems Existing in Marble Monuments,” Materialprüfung, Vol. 22, Bundesanstalt für Materialforschung und Prüfung, Berlin, Germany, pp. 298-300. Hellier, C., 1983, “Who Will Inspect Our Bridges?” Materials Evaluation. Vol. 41, No. 12, American Society for Nondestructive Testing, Columbus, OH, pp. 13521355. Hitt, W.C. and D.J. Hagemaier, 1960, “Radiography of Weldments In- Motion,” Symposium on Nondestructive Testing in the Missile Industry [San Francisco, October 1959]. Special Technical Publication 278, ASTM International, West Conshohocken, PA. Hoppins, W.K., 1968, “In-Motion Radiography,” Precision Metal, Industrial Publishing Company, Cleveland, OH. Hovland, H., 1985, “Developments in Field X-Radiography, 1931–62,” Materials Evaluation, Vol. 43, No. 11, American Society for Nondestructive Testing, Columbus, OH, pp. 1386-1390. Humphries, H., 1987, “Infrared Testing in Art Conservation,” Materials Evaluation, Vol. 45, No. 4, American Society for Nondestructive Testing, Columbus, OH, pp. 426-428, 430. Hussein, E.M., 1992, “Detection of Explosive Materials Using Nuclear Radiation: A Critical Review.” Aviation Security Problem and Related Technologies. SPIE Proceedings, Vol. CR42, International Society for Optical Engineering, Bellingham, WA, pp. 126-136. Inanc, F. and J.N. Gray, 1991, “New Developments in the Computer Simulation of X-Ray NDE Process,” Review of Progress in Quantitative Nondestructive Evaluation, Vol. 10A, Plenum, New York, NY, pp. 355-362. Ito, G., 1982, “A Review of the History of Nondestructive Testing in Japan,” Materials Evaluation, Vol. 40, No. 11, American Society for Nondestructive Testing, Columbus, OH, pp. 1138, 1140-1141. Jones, T., 1999, “Evaluation of Digital X-Ray Imaging Systems for US Air Force Applications,” ASNT Fall Conference and Quality Testing Show Paper Summaries [Phoenix, AZ, October 1999], American Society for Nondestructive Testing, Columbus, OH, pp. 137-139. Katz, R., M.R. Lee, and M. Milner, 1950, “X-Ray Inspection of Wheat.” Nondestructive Testing, Vol. 9, No. 2. American Society for Nondestructive Testing, Columbus, OH, pp. 16-18. Kleven, S., 2000, “Use of Computed Radiology during the Archaeological Conservation of LaSalle’s Ship — The Belle,” 15th World Conference on Non-Destructive Testing [Rome, Italy]. Italian Society for Non-Destructive Testing Monitoring Diagnostics, Brescia, Italy, p. 157. Knight, R.B., Jr., C. Maucher, and T.S. Jones, 1998, “A Method to Determine Erosion in Sealed Double Walled Vessels Using Gamma Ray Sources and Laminographic Tomosynthesis,” The 9th Asia-Pacific Conference on Nondestructive Testing in Conjunction with ASNT’s 1998 Spring Conference and 7th Annual Research Symposium [Anaheim, CA], American Society for Nondestructive Testing, Columbus, OH, pp. 217-220. Knoll, G.F., 2000, Radiation Detection and Measurement, third edition, John Wiley and Sons, New York, NY. Koicki, S., A. Koicki, and V. Aydacic, 1973, Nuclear Instrumentation and Methods: p. 297. Krolicki, R.P., 1977, “Internal Corrosion Examination and Wall Thickness Measurement of Pipe by Radiographic Method,” Materials Evaluation, Vol. 35, No. 2, American Society for Nondestructive Testing, Columbus, OH, pp. 32-33, 44. Kropas-Hughes, C.V. and S. Trent Neel, 2000, “Basics of Computed Tomography,” Materials Evaluation. Vol. 58, No. 5, American Society for Nondestructive Testing, Columbus, OH, pp. 630-633. Lanza, R.C., 1992, “Visualization and Imaging,” Aviation Security Problems and Related Technologies. SPIE Proceedings, Vol. CR42, International Society for Optical Engineering, Bellingham, WA, pp. 104125. Lapides, M.E., 1986, “Radiographic In-Service Inspection of Cast Austenitic Nuclear Plant Components,” Materials Evaluation, Vol. 44, No. 1, American Society for Nondestructive Testing, Columbus, OH, pp. 108-113. Lavayssiére, B. and N. Lacoudre, 1998, “Application of Radiography for the Conservation and Restoration of Archaeological Objects.” 7th European Conference on NonDestructive Testing [Copenhagen, Denmark]. Vol. 1, 7th ECNDT, Copenhagen, Denmark, pp. 416-419. Lewis, W.J. and L.G.I. Bennett, 1998, “The Use of Neutron Radiography in the Inspection of Aircraft Composite Flight Control Surfaces,” The First Pan-American Conference on Nondestructive Testing: Alliance of the Americas [Toronto, Canada, September 1998]. American Society for Nondestructive Testing, Columbus, OH, p. 51-55. Livingston, R.A., 1994, “Transferring Technology from Conservation Science to Infrastructure Renewal,” Public Roads, Vol. 58, No. 1, Federal Highway Administration, McLean, VA. Livingston, A. and H. Saleh, 1998, “Development of an Epithermal Neutron Detector for Nondestructive Measurement of Concrete Hydration,” Nondestructive Characterization of Materials VIII: Proceedings of the Eighth International Symposium held in Boulder, Colorado, June 15-20, 1997, Plenum Press, New York, NY, pp. 535-540. Livingston, R.A. and H.H. Saleh, 1998, “Specification and Design of a Portable Prompt Gamma/Neutron Activation System for Nondestructive Determination of Chloride in Reinforced Concrete,” Topics on Nondestructive Evaluation: Vol. 2, Nondestructive Testing and Evaluation of Infrastructure, American Society for Nondestructive Testing, Columbus, OH, pp. 83-96.

725 Livingston, R.A., H.H. Saleh, R.C. Block, and P.J. Brand, 2000, “Time of Flight Calibration of Li-6 Glass Epithermal Neutron Detectors,” Applied Radiation and Isotopes, Vol. 53, No. 4-5, Pergamon Press, Oxford, United Kingdom, pp. 773-777. Loftus, T., 1999, “Integrating Profile and Computed Radiography for Internal and External Corrosion Detection, Evaluation and Monitoring,” ASNT’s International Chemical and Petroleum Industry Inspection Technology (ICPIIT) VI Topical Conference: The Challenges to NDT in the New Millennium [Houston, TX]. American Society for Nondestructive Testing, Columbus, OH, pp. 77-86. London, B., R.N. Yancey, and J.A. Smith, 1990, “High-Resolution X-Ray Computed Tomography of Composite Materials,” Materials Evaluation, Vol. 48, No. 5, American Society for Nondestructive Testing, Columbus, OH, pp. 604-608, 629. Maranville, C., 1998, “Requirements for Radioscopy of Aerospace Structures,” Real-Time Radioscopy and Digital Imaging [Mashantucket, CT, August 1998], American Society for Nondestructive Testing, Columbus, OH, pp. 37-43. Marchese, M. and K.A. Glodowski, 1991, “Real-Time Microfocus Radiography for Electronic Failure Analysis,” Materials Evaluation, Vol. 49, No. 12, Columbus, OH: American Society for Nondestructive Testing, Columbus, OH, pp. 1481-1485. Marks, P.T., 1993, “The Generation of Error in Interpretation,” 1993 International Chemical and Petroleum Industry Inspection Technology III Topical Conference [Houston, TX], American Society for Nondestructive Testing, Columbus, OH, pp. 90-91. Marr, W.A. and C. Fairhurst, eds., 1999, Nondestructive and Automated Testing for Soil and Rock, Special Technical Publication 1350, ASTM International, West Conshohocken, PA. McDaniel, G.A., 1986, “Recent Developments in High Output Microfocus X-Ray Systems,” Automated Nondestructive Testing: Proceedings of a Topical Seminar [Idaho Falls, ID, June 1983]. Sponsored by American Society for Nondestructive Testing South Idaho Section. Gordon and Breach Science Publishers, Amsterdam, Netherlands, pp. 209-212. McFaul, H.J., 1969, “Automated Radiographic Film Interpretations,” Presented at Voordrachten: 5th International Symposium on Industrial Radiography [Antwerp, Belgium]. Gevaert-Agfa, Mortsel, Belgium. Minato, S., 1988, “Feasibility of CosmicRay Radiography: A Case Study of a Temple Gate as a Testpiece,” Materials Evaluation, Vol. 46, No. 11, American Society for Nondestructive Testing, Columbus, OH, pp. 14681470. Míˇsek, B. and L. Ptáˇcek, 1984, “Some Data Obtained on X-Ray and Neutronographic Examination of Heat Resistant Ni-Base Alloys.” 3rd European Conference on Nondestructive Testing [Florence, Italy]. Vol. 1. Italian Society for Non-Destructive Testing, for the European Societies for Nondestructive Testing, Brescia, Italy, pp. 246-251. Mitchell, T.M., 1990, “Radioactive/Nuclear Methods,” CRC Handbook on Nondestructive Testing of Concrete, CRC Press, Boca Raton, FL, pp. 227-252. Moore, P.O., 1985, “A Gamma-Radiographer of Pipeline Welds,” Materials Evaluation, Vol. 43, No. 9, American Society for Nondestructive Testing, Columbus, OH, pp. 1084-1086, 1088-1089. Moriarty, C.D., 1961, “Progress in Nondestructive Testing of Steam Turbine-Generator Components” [1960 Mehl Honor Lecture]. Nondestructive Testing. Vol. 19, No. 1, American Society for Nondestructive Testing, Columbus, OH, pp. 29-38. Niehous, F., G. Coen, R. Kretschmer, and M. Biercher, 1985, “Radiographic Inspection of Prestressed Concrete up to 1600 mm Wall Thickness Using a 9 MeV Linear Accelerator,” 11th World Conference on Nondestructive Testing [Las Vegas, Nevada]. Vol. 1, American Society for Nondestructive Testing, Columbus, OH, pp. 528534. Newell, R.S. and P.J. Stolarski, 1992, “Use of a Portable Linear Accelerator to Radiograph a Bridge Drainage Pump,” Materials Evaluation, Vol. 50, No. 9, American Society for Nondestructive Testing, Columbus, OH, pp. 1084, 10861087. Olsen, R., 1988, “More Than Just a Pretty Picture: Real-Time X-Ray Image Enhancement in the Electronics Industry,” Materials Evaluation, Vol. 46, No. 11, American Society for Nondestructive Testing, Columbus, OH, pp. 14031408. Paderni, L. and M. Micheli, 1984, “X-Ray Study of Peruvian Funeral ‘Fardos’ of the Museo Preistorico Etnografico ‘Luigi Pignorini.’ 3rd European Conference on Nondestructive Testing (Florence, Italy). Vol. 1. Italian Society, for NonDestructive Testing, for the European Societies for Nondestructive Testing, Brescia, Italy, pp. 263-275. Panakkal, J.P., K.N. Chandresekharan, and J.K. Ghosh, 1985, “Radiographic Detection of Tungsten in Nuclear Fuel Pin End-Plug Welds,” Materials Evaluation, Vol. 43, No. 8, American Society for Nondestructive Testing, Columbus, OH, pp. 1005-1007. Pancyzk, E., M. Ligeza, K. Pytel, A. Kalicki, L. Rowinska, B. Sartowska, and L. Walis, 2000, “NeutronInduced Autoradiography in the Study of Oil Paintings by Tintoretto, Marieschi, and Bellotto,” 15th World Conference on NonDestructive Testing [Rome, Italy]. Italian Society for Non-Destructive Testing Monitoring Diagnostics, Brescia, Italy, p. 179. Placious, R.C., D.A. Garrett, M.B. Kasen, and H. Berger, 1981, “Dimensioning Flaws in Pipeline Girth Welds by Radiographic Methods,” Materials Evaluation, Vol. 39, No. 8, American Society for Nondestructive Testing, Columbus, OH, pp. 755-760. Porter, D., 1987, Correspondence. Ptácková, M. and L. Ptácek, 1984, “Complex Examination of Corrosion Damage in Archaeological Finds of Etruscan Bronze Jewels.” 3rd European Conference on Nondestructive Testing [Florence, Italy]. Vol. 1. Italian Society for Non-Destructive Testing, for the European Societies for Nondestructive Testing, Brescia, Italy, pp. 252-261. Reider, J.E., 1957, “Industrial Nucleonic Gauging,” Nondestructive Testing. Vol. 15, No. 6, American Society for Nondestructive Testing, Columbus, OH, pp. 360-365. Reimers, P. and J. Riederer, 1984, “Zerstörungsfreie Prüfung Kulturgeschichtlicher Objekte durch Computertomographie (CT).” 3rd European Conference on Nondestructive Testing [Florence, Italy]. Vol. 1. Italian Society for Non-Destructive Testing, for the European Societies for Nondestructive Testing, Brescia, Italy, pp. 305-313. Regas, S., 1958, “Industrial Applications of Radioisotopes, Nuclear Liquid Level Gauges,” Nondestructive Testing. Vol. 16, No. 6, American Society for Nondestructive Testing, Columbus, OH, pp. 493-494. Reynolds, G.M., 1976, “Neutron Gauging Systems,” Practical Applications of Neutron Radiography and Gauging. Special Technical Publication 586, ASTM International, West Conshohocken, PA, p. 58. Richards, W.J., G.C. McClellan, and D.M. Tow, 1982, “Neutron Tomography of Nuclear Fuel Bundles,” Materials Evaluation, Vol. 40, No. 12, American Society for Nondestructive Testing, Columbus, OH, pp. 1263-1267. Richards, W.J., M.R. Gibbons, and K.C. Shields, 1997, “Neutron Tomography of Aerospace Structures,” Fifth World Conference on Neutron Radiography [Berlin, Germany, June 1996]. Deutsche Gesellschaft für Zerstörungsfreie Prüfung, Berlin, Germany, pp. 644-649. Ritz, V.H., 1958, “Broad and Narrow Beam Attenuation of Ir-192 Gamma Rays in Concrete, Steel, and Lead,” Nondestructive Testing, Vol. 16, No. 3, American Society for Nondestructive Testing, Columbus, OH, pp. 269-272. Ross, A.M., 1977, “Neutron Radiographic Inspection of Nuclear Fuels,” Atomic Energy Review. Vol. 15, No. 2. International Atomic Energy Agency, Vienna, Austria, pp. 221-247. Rossi, M., 1998, “High Resolution 3D Computed Tomography of Small Archaeological Sculptures,” 7th European Conference on NonDestructive Testing [Copenhagen, Denmark]. Vol. 1. 7th ECNDT, Copenhagen, Denmark, pp. 409-415. REFERENCES