754 REFERENCES CHAPTER 2 10 CFR 20, United State Nuclear Regulatory Commission [Code of Federal Regulations: Title 10, Energy]. Part 20, Standards for Protection Against Radiation. Washington, DC: United States Government Printing Office. 29 CFR 1910, Occupational Safety and Health Standards [Code of Federal Regulations: Title 29, Labor]. Washington, DC: United States Department of Labor, Occupational Safety and Health Administration. 29 CFR 1910.101, OSHA Hazard Communication Standard. [Code of Federal Regulations: Title 29, Labor]. Washington, DC: United States Department of Labor, Occupational Safety and Health Administration United States Government Printing Office. 29 CFR 1910.1200, OSHA Hazard Communication Standard. [Code of Federal Regulations: Title 29, Labor]. Washington, DC: United States Department of Labor, Occupational Safety and Health Administration United States Government Printing Office. 29 CFR 1926, Occupational Safety and Health Standards for the Construction Industry [Code of Federal Regulations: Title 29, Labor]. Washington, DC: United States Department of Labor, Occupational Safety and Health Administration. 40 CFR 13, Code of Federal Regulations: Title 40, Protection of the Environment: Part 13, Water Quality Standards. Washington, DC: United States Government Printing Office. 49 CFR 173.301, Code of Federal Regulations: Title 49, General Requirements for Shipment of Compressed Gases and Other Hazardous Materials in Cylinders, UN Pressure Receptacles and Spherical Pressure Vessels. Washington, DC: United States Department of Transportation. ACGIH. Documentation of the Threshold Limit Values [for Chemical Substances and Physical Agents] and Biological Exposure Indices. Cincinnati, OH: American Conference of Governmental Industrial Hygienists ANSI AS 2473-1990, Valves for Compressed Gas Cylinders (threaded outlet). New York, NY: American National Standards Institute. API PSD 2210, Flame Arrestors for Vents of Tanks Storing Petroleum Products. Washington, DC: American Petroleum Institute. API Standard 527, Seat Tightness of Pressure Relief Valves. Washington, DC: American Petroleum Institute. ASME Boiler and Pressure Vessel Code. New York, NY: American Society of Mechanical Engineers. ASME SE 432, Standard Recommended Guide for the Selection of a Leak Testing Method. New York, NY: American Society of Mechanical Engineers. ASNT. 1982. Nondestructive Testing Handbook, 1: Leak Testing, 2nd edition. Columbus, OH: American Society for Nondestructive Testing. ASTM D 2240, Standard Test Method for Rubber Property — Durometer Hardness. Conshohocken, PA: ASTM International. ASTM D 323, Standard Method for Vapor Pressure of Petroleum Products (Reid Method). West Conshohocken, PA: American Society for Testing and Materials. ASTM D 396, Standard Specification for Fuel Oils. West Conshohocken, PA: ASTM International. AWWA 10008, Water Quality and Treatment: A Handbook of Community Water Supplies. Denver, CO: American Water Works Association. CFR. Code of Federal Regulations. Washington, DC: United States Government Printing Office. DHHS (NIOSH) 73-11009, Criteria for a Recommended Standard: Occupational Exposure to Ultraviolet Radiation. Atlanta, GA: National Institute for Occupational Safety and Health. EPA. 2013. Clean Air Act Overview: Title VI, Stratospheric Ozone Protection [42 USC. 2013. United States Code: 42.85, Air Pollution Prevention and Control: VI, Stratospheric Ozone Protection]: Section 7671i, “Nonessential Products Containing Chlorofluorocarbons.” Washington, DC: United States Government Publishing Office, for United States Environmental Protection Agency. Hahn, W., and P. Jensen. 1974. Water Quality Characteristics of Hazardous Materials. College Station, TX: Texas A&M University. Hemeon, W.E. 1963. Plant and Process Ventilation. New York, NY: Industrial Press. Hine, C.H., and N.W. Jacobson. 1954. “Safe Handling Procedures for Compounds Developed by the Petro-Chemical Industry.” AIHA Journal. Vol. 15. Fairfax, VA: American Industrial Hygiene Association (June): 141-144. Holler, L. R. 1952. Ultraviolet Radiation. New York, NY: John Wiley & Sons. Key, M.M. 1977. Occupational Diseases — A Guide to Their Recognition. DHEW publication NIOSH 77-181. Washington, DC: United States Department of Health, Education, and Welfare [DHEW], National Institute for Occupational Safety and Health [NIOSH] Superintendent of Documents, United States Government Printing Office. NB 263, Rules for Commissioned Inspectors. Columbus, OH: National Board of Boiler and Pressure Vessel Inspectors. NB 360, National Board Acceptance of Authorized Inspection Agencies (AIA), Accredited by the American Society of Mechanical Engineers (ASME). Columbus, OH: National Board of Boiler and Pressure Vessel Inspectors. NFPA 51, Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes. Quincy, MA: National Fire Protection Association. NFPA 70, National Electrical Code. Quincy, MA: National Fire Protection Association. NFPA 77-1993, Recommended Practice on Static Electricity. Quincy, MA: National Fire Protection Association NIOSH. 1977. DHHS Publication Number 77-181, Occupational Diseases: A Guide to Their Recognition. Atlanta, GA: Centers for Disease Control and Prevention, for the National Institute for Occupational Safety and Health. NIOSH. 1997. DHHS 97-119, Registry of Toxic Effects of Chemical Substances (RTECS). Atlanta, GA: Centers for Disease Control and Prevention, for the National Institute for Occupational Safety and Health. OSHA. Accessed 2015. A Guide to The Globally Harmonized System of Classification and Labelling of Chemicals (GHS). Washington, DC: Occupational Safety and Health Administration. Roehrs, R.J., and D.E. Center. 1968. “The Safety Aspects of Leak Testing.” ASNT Fall Conference [Detroit, MI, October 1968]. Abstract in Materials Evaluation 26 (9): 34A. SE 432-95, Standard Recommended Guide for the Selection of a Leak Testing Method [ASTM E 432-71]. New York, NY: American Society of Mechanical Engineers.

755 T8CCR. Department of Industrial Relations [California Code of Regulations, Title 8, Permissible Exposure Limits for Chemical Contaminants]. Oakland, CA: California Department of Industrial Relations. UN. 2006. Handbook for the Montreal Protocol on Substances that Deplete the Ozone Layer, 7th edition. New York, NY: United Nations. UN GHS. 2013. UN ST/SG/AC.10/30/Rev.5, Globally Harmonized System of Classification and Labelling of Chemicals (GHS), 5th edition. New York, NY: United Nations. CHAPTER 3 ASNT. 1982. Nondestructive Testing Handbook 1: Leak Testing, 2nd edition. Chapter 2, “Technology and Characteristics of Gaseous Tracers Used in Leak Testing.” Columbus, OH: American Society for Nondestructive Testing: 57-100. ASNT. 1998. Nondestructive Testing Handbook 1: Leak Testing, 3rd edition. Chapter 3, “Calibrated Reference Leaks.” Columbus, OH: American Society for Nondestructive Testing: 71-100. Brodkey, R.S., and H.C. Hershey. 1988. Transport Phenomena: A Unified Approach. New York, NY: McGraw-Hill. Roth, A. 1994. Vacuum Sealing Techniques. New York, NY: AIP Press. Slattery, J.C., and R.B. Bird. 1958. “Calculation of the Diffusion Coefficient of Dilute Gases and of the Self-Diffusion Coefficient of Dense Gases.” AIChE Journal 4 (2): 137-142. Umrath, W. 2007. Fundamentals of Vacuum Technology. Köln, Germany: Oerlikon Leybold Vacuum. CHAPTER 4 Abbott, P.J., and S.A. Tison. 1996. “Commercial Helium Permeation Leak Standards: Their Properties and Reliability.” Journal of the Vacuum Society of America A — Vacuum, Surfaces, and Finishes 14 (3): 1242-1246. ASNT. 1982. Nondestructive Testing Handbook 1: Leak Testing, 2nd edition. Columbus, OH: American Society for Nondestructive Testing. Ehrlich, C.D., and J.A. Basford. 1992. “Recommended Practices for the Calibration and Use of Leaks.” Journal of Vacuum Science and Technology A — Vacuum, Surfaces, and Finishes 10 (1): 1-17. CHAPTER 5 ANSI/ANS 56.8, Containment System Leakage Testing Requirements, Appendix C. La Grange Park, IL: American Nuclear Society. Fleshood, D.L. 1976. “Containment Leak Rate Testing: Why the Mass-Plot Analysis Method Is Preferred.” Power Engineering 80 (2): 56-59. Guthrie, A. 1963. Vacuum Technology. New York, NY: Wiley. Reprint 1990, Malabar, FL: Krieger Publishing. Haynes, William M. 2015. CRC Handbook of Chemistry and Physics, 96th edition. Boca Raton, Florida: CRC Press. Kendall, M.G., and A. Stuart. 1961. The Advanced Theory of Statistics 2. 3rd edition. New York, NY: Hafner Publishing. Lau, L.W. 1978. “Data Analysis during Containment Leak Rate Test.” Power Engineering 78 (2): 46-49. Steinherz, H.A. 1963. Handbook of High Vacuum Engineering. New York, NY: Reinhold Publishing. Tietjen, G.L., R.H. Moore, and R.J. Beckman. 1973. “Testing for a Single Outlier in Simple Linear Regression.” Technometrics 15 (4): 717-721. CHAPTER 6 Umrath, W. 2007. Fundamentals of Vacuum Technology. Köln, Germany: Oerlikon Leybold Vacuum. CHAPTER 7 ASTM E 515, Standard Practice for Leaks Using Bubble Emission Techniques. West Conshohocken, PA: ASTM International. MIL-PRF-25567E, Leak Detection Compound, Oxygen Systems. Washington, DC: United States Air Force. MIL-STD-202H, Test Methods for Electronic and Electrical Component Parts. DOD STD Issue 97-02. Springfield, VA: National Technical Information Service. NASA MSFC-SPEC-384, Leak Test Compound, LOX Compatible. Washington, DC: NASA. CHAPTER 8 ASME Boiler and Pressure Vessel Code: Section 5, Nondestructive Examination. Article 10, “Leak Testing.” New York, NY: American Society of Mechanical Engineers. ASTM E 1603, Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode. West Conshohocken, PA: ASTM International. ASTM E 493, Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode. West Conshohocken, PA: ASTM International. ASTM E 498, Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode. West Conshohocken, PA: ASTM International. ASTM E 499, Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode. West Conshohocken, PA: ASTM International. CHAPTER 9 Marr, J.W. 1969. Report CR 952, Leakage Testing Handbook, revised edition. Springfield, VA: National Technical Information Service. Umrath, W. 2007. Fundamentals of Vacuum Technology. Cologne, Germany: Oerlikon Leybold Vacuum. REFERENCES