720 REFERENCES ASTM E 1025-18, Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography, West Conshohocken, PA: ASTM International. ASTM E 1030/E1030M-15, Standard Practice for Radiographic Examination of Metallic Castings, West Conshohocken, PA: ASTM International. ASTM E 1320-15, Standard Reference Radiographs for Titanium Castings, West Conshohocken, PA: ASTM International. ASTM E 1648-15, Standard Reference Radiographs for Examination of Aluminum Fusion Welds, West Conshohocken, PA: ASTM International. ASTM E1734-16a, Standard Practice for Radioscopic Examination of Castings, West Conshohocken, PA: ASTM International. ASTM E 1742/E1742M-12, Standard Practice for Radiographic Examination, West Conshohocken, PA: ASTM International. ASTM E 1814-14, Standard Practice for Computed Tomographic (CT) Examination of Castings, West Conshohocken, PA: ASTM International ASTM E 2002-15, Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy, West Conshohocken, PA: ASTM International. ASTM E 2422-17, Standard Digital Reference Images for Inspection of Aluminum Castings, West Conshohocken, PA: ASTM International. ASTM E 2660-17, Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications, West Conshohocken, PA: ASTM International. ASTM E 2669-16e1, Standard Digital Reference Images for Titanium Castings, West Conshohocken, PA: ASTM International. ASTM E 2868-17, Standard Digital Reference Images for Steel Castings Up to 2 in. (50.8 mm) in Thickness, West Conshohocken, PA: ASTM International (2017). ASTM E 2869-17, Standard Digital Reference Images for Magnesium Castings, West Conshohocken, PA: ASTM International. ASTM E 2973-15, Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings, West Conshohocken, PA: ASTM International. ASTM F 629-15, Standard Practice for Radiography of Cast Metallic Surgical Implants, West Conshohocken, PA: ASTM International. GAF Corporation, 1968, Casting Inspection Handbook, Arlington, TX: GAF. Goldspiel, S., 1960, “Development of Radiographic Standards for Castings,” Third International Conference on Nondestructive Testing [Osaka, Japan], Tokyo, Japan: Japanese Society for Nondestructive Testing, for the International Committee for Nondestructive Testing. Goldspiel, S., July 1969, “Development of Radiographic Standards for Castings,” Materials Research and Standards. Goldspiel, S., and W.N. Roy, November 1982,“Reference Radiographs,” Standardization News, Volume 10, Number 11, West Conshohocken, PA: ASTM International. Jones, T., and S. Goldspiel, and Harold Berger and Leonard Mordfin, eds., 1992, “Reference Radiograph Standards: Past Present and Future,” Nondestructive Testing Standards—Present and Future, p. 23-33, Philadelphia, PA: ASTM International. Quinn, R.A. and C.C. Sigl, eds., 1980, Radiography in Modern Industry, 4th edition, Rochester, NY: Eastman Kodak Company. SAE AMS-STD-2175, Castings, Classification and Inspection of, Warrendale, PA: SAE International. CHAPTER 15 ABS 2, Rules for Building and Classing Steel Vessels, American Bureau of Shipping, New York, NY. ABS 14, Nondestructive Inspection of Hull Welds, American Bureau of Shipping, New York, NY ASME B31.1, Power Piping, American National Standards Institute, New York, NY. ASME B31.3, Process Piping, American National Standards Institute, New York, NY. ASME Boiler and Pressure Vessel Code, American Society of Mechanical Engineers, New York, NY. API 650, Standard for Welded Steel Tanks for Oil Storage, American Petroleum Institute, Washington, DC. API 1104, Welding Pipelines and Related Facilities, American Petroleum Institute, Washington, DC. ASTM E94, Standard Guide for Radiographic Examination Using Industrial Radiographic Film, ASTM International, West Conshohocken, PA. ASTM E142, Standard Method for Controlling Quality of Radiographic Testing, ASTM International, West Conshohocken, PA. ASTM E747, Design, Manufacture, and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology, ASTM International, West Conshohocken, PA. ASTM E1025, Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology, ASTM International, West Conshohocken, PA. ASTM E1032, Standard Test Method for Radiographic Examination of Weldments, ASTM International, West Conshohocken, PA. ASTM E1742, Standard Practice for Radiographic Examination, ASTM International, West Conshohocken, PA. ASTM E2007-10, Standard Guide for Computed Radiography, ASTM International, West Conshohocken, PA. ASTM E2104, Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components, ASTM International, West Conshohocken, PA. ASTM E2736-17, Standard Guide for Digital Detector Array Radiology, ASTM International, West Conshohocken, PA. ASTM. Updated annually. Annual Book of ASTM Standards, West Conshohocken, PA: ASTM International, AWS D14.3/D14.3M, Specification for Welding, Earthmoving, and Construction Equipment, American Welding Society, Miami, FL. AWS D1.1/D1.1M, Structural Welding Code — Steel, American Welding Society, Miami, FL. D100-11, Welded Carbon Steel Tanks for Water Storage, American Waterworks Association, Denver, CO. Becker, G.L., 1972, “Factors Governing Radiographic Crack Detectability in Steel Weld Specimens,” Materials Evaluation, Vol. 30, No. 7, American Society for Nondestructive Testing, Columbus, OH, p 149–152. Becker, G.L. and W.T. Granett, 1967, “The Use of Crack Simulators to Assure X-Ray Inspection Technique Reliability,” Proceedings of the Sixth Symposium on Nondestructive Evaluation of Aerospace and Weapons System Components and Materials, Western Periodicals Company, North Hollywood, CA, p. 533–559. Buckrop, R.L., 1972, “What Makes a Good Weld … and Radiography Can Prove It,” Materials Evaluation, Vol. 30, No. 5, American Society for Nondestructive Testing, Columbus, OH, p. 25A–31A. Chapman, H., 1985, “Radiographic Control of Welds,” Nondestructive Testing Handbook 3, Radiography and Radiation Testing, second edition, American Society for Nondestructive Testing, Columbus, OH, p. 418–457. Chen, W.H., P. Banerjee, and B.A. Chin, 1989, “Study of Penetration Variation in Automated Gas Tungsten Arc Welding,” Recent Trends in Welding Science and Technology, ASM International, Materials Park, OH, p. 517–522. Criscuolo, E.L., 1966, “Slit Detection by Radiography,” Materials Evaluation, Vol. 24, No. 4, American Society for Nondestructive Testing, Columbus, OH, p. 201–205.

721 CSA W59-M1989 (R2001), Welded Steel Construction (Metal Arc Welding), metric version, Canadian Standards Association, Toronto, Ontario, Canada. Dutili, J.W. and G.H. Tenney, 1954, “A Preliminary Investigation of the Radiographic Visualization of Cracks,” Nondestructive Testing, Vol. 12, No. 2, American Society for Nondestructive Testing, Columbus, OH, p. 13–15. Guu, A.C. and S.I. Rokhlin, 1989, “Computerized Radiographic Weld Penetration Control with Feedback on Weld Pool Depression,” Materials Evaluation, Vol. 47, No. 10, American Society for Nondestructive Testing, Columbus, OH, p. 1204–1210. Guu, A.C. and S.I. Rokhlin, 1992a, “Arc Weld Process Control Using Radiographic Sensing,” Materials Evaluation, Vol. 50, No. 11, American Society for Nondestructive Testing, Columbus, OH, p. 1344–1348, 1356. Guu, A.C. and S.I. Rokhlin, 1992b, “Technique for Simultaneous Real- Time Measurements of Weld Pool Surface Geometry and Arc Force,” Welding Journal, Vol. 71, No. 12, American Welding Society, Miami, FL, p. 473–482. Guu, A.C. and S.I. Rokhlin, 1993, “A Study of Arc Force, Weld Pool Depression, and Penetration during Gas Tungsten Arc Welding,” Welding Journal, Vol. 72, No. 8, American Welding Society, Miami, FL, p. 381–390. Hirosawa, E., M. Naoe, and T. Fukui, 1971, “‘Ghost Defects’ in Radiographs of Aluminum Alloy Welds,” Materials Evaluation, Vol. 29, No. 5, American Society for Nondestructive Testing, Columbus, OH, p. 99–104. Irie, M., M. Fujii, and S. Yamashita, 1963, “The Influence of Structure on the X-ray Radiograph of Stainless Steel Welds,” Hihakai-Kensa [Journal of NDI], Vol. 12, Japanese Society for Non-Destructive Inspection, Tokyo, Japan, p. 263. In Japanese. Issiki, S., J. Ko, K. Kataoka, and T. Yamazawa, 1966, “The Abnormal Pattern in Radiographs of Aluminum Alloy Castings,” Hihakai-Kensa [Journal of NDI], Vol. 15, Japanese Society for Non-Destructive Inspection, Tokyo, Japan, p. 257–265. In Japanese. McMaster, R.C., 1959, “Radiographic Sensitivity,” Nondestructive Testing Handbook 1, first edition, section 15, American Society for Nondestructive Testing, Columbus, OH, p. 31–37. MIL-STD-453C, Inspection, Radiographic, US Department of Defense, Washington, DC. NDE Characteristics of Pipe Weld Defects, 1980, Special Report NP-1590-SR, Electric Power Research Institute, Palo Alto, CA. NRC-BLDG CODE-95, National Building Code of Canada 1995, National Research Council Canada, Institute for Research in Construction, Ottawa, Ontario, Canada. Rabkin, D.M., L.A. Bukalo, V.T. Korzbova, and A.S. Deniyanchuck, 1966, “Weld Heterogeneity in Aluminum Magnesium Alloys,” Avtomaticheskaia Svarka [Automatic Welding], No. 5, Instytut Elektrozvariuvannia of Akademiia nauk Ukraïns´ koï RSR, Kiev, Ukraine, p. 74–75. In Russian. Richardson, R.W., 1986, “Robotic Weld Joint Tracking Systems — Theory and Implementation Methods,” Welding Journal, Vol. 21, No. 11, American Welding Society, Miami, FL, p. 43–51. Rokhlin, S.I., 1989, “In-Process Radiographic Evaluation of Arc Welding,” Materials Evaluation, Vol. 47, No. 2, American Society for Nondestructive Testing, Columbus, OH, p. 219–224. Erratum, 1989, Materials Evaluation, Vol. 47, No. 12, p. 1424. Rokhlin, S.I., K. Cho, and A.C. Guu, 1989, “Closed-Loop Process Control of Weld Penetration Using Real-Time Radiography,” Materials Evaluation, Vol. 47, No. 3, American Society for Nondestructive Testing, Columbus, OH, p. 363–369. Rummel, W.D. and B.E. Gregory, 1965, “Ghost Lack of Fusion in Aluminum Alloy Butt Fusion Welds,” Materials Evaluation, Vol. 23, No. 12, American Society for Nondestructive Testing, Columbus, OH, p. 586–588. Tucker, M.S. and P.A. Larssen, 1968, “Markings in Radiographs of 2014 Aluminum Alloy Gas Tungsten-Arc Welds,” Welding Journal, Vol. 47, No. 5, American Welding Society, Miami, FL, p. 223–225. Watkins, A.D., J.A. Johnson, and H.B. Smart, 1986, “Economic Evaluation of Concurrent Welding and Nondestructive Testing,” Welding Journal, Vol. 65, No. 6, American Welding Society, Miami, FL, p. 17–21. CHAPTER 16 Adams, J. 1989, “Scanned-Beam Laminography Breaks through the 3-D Barrier,” Proceedings of the Technical Program — National Electronic Packaging and Production Conference (West) [NEPCON West ‘89] (Anaheim, CA, March 1989). Des Plaines, IL: Cahners Exposition Group. AFML-TR-66-274, n.d., Nondestructive Testing of Silica-Phenolic Materials for Small Ablative Thrust Chambers. Air Force Materials Laboratory, Wright-Patterson Air Force Base, Dayton, OH. Agfa-Gavaert NV, [n.d. a ], Flemish Masterpieces X-Rayed with Structurix Industrial X-Ray Film, Press release, Agfa Gavaert NV, Mortsel, Belgium. Agfa-Gavaert NV, [n.d. b ], “The Hermitage Museum Conservation Project: Titian’s The Flight into Egypt,” Worldwide, Vol. 8/9, Agfa Gavaert NV, Mortsel, Belgium. Agfa-Gavaert NV, [n.d. c ], “The Mysterious Paintings of Francis Picabia,” Worldwide, Vol. 7. Agfa-Gavaert NV, Mortsel, Belgium. Agfa-Gavaert NV, 1988, “The Ingenuity of Flemish Art and NDT Technology Combined.” Brochure, Agfa-Gavaert NV, Mortsel, Belgium. Albert, R., W. Pember, J. Garrison, and D. Reyna, 2000, “Aircraft Inspection with a Portable, Filmless X-Ray System Using Reverse Geometry.” Materials Evaluation, Vol. 58, No. 5, American Society for Nondestructive Testing: Columbus, OH, pp. 634-638. Alonso, M.A., M Arroyo, V. Gil, E.M. de Salinas, and G. Delojo, 1998, “A Radiographic Study of Insect Attacks in Woods,” 7th European Conference on Non-Destructive Testing, Vol. 1, Copenhagen, Denmark: 7th ECNDT: pp. 400-408. Alvarez, L.W., 1970, “Search for Hidden Chambers in the Pyramids,” Science. Vol. 167, American Association for the Advancement of Science, Washington, DC: pp. 832-839. AWS D1.12, Structural Welding Code — Steel. Section 8, Buildings, American Welding Society, Miami, FL. API 1104, Welding of Pipelines and Related Facilities, 21st edition, American Petroleum Institute, Washington, DC. API 650, Welded Tanks for Oil Storage, 12th edition, American Petroleum Institute, Washington, DC. API 653, Tank Inspection, Repair, Alteration, and Reconstruction, 5th edition. American Petroleum Institute, Washington, DC. ASME Boiler and Pressure Vessel Code: Section V, Nondestructive Examination. Article 2, “Radiographic Examination,” American Society of Mechanical Engineers, New York, NY. ASME Boiler and Pressure Vessel Code: Section III, Rules for Construction of Nuclear Facility Components. Div. 1, Subsections NB and NC, Class 1 and Class 2 Components, American Society of Mechanical Engineers, New York, NY. ASNT, 1959, Nondestructive Testing Handbook 1, first edition, Vol. 1, Sec. 25, American Society for Nondestructive Testing, Columbus, OH, pp. 16-27. ASNT, 1964, “George Corney’s Radiographs Help Move Vatican’s Pieta,” Materials Evaluation, Vol. 22, No. 6, American Society for Nondestructive Testing, Columbus, OH, p. 279. ASNT, 1972, “Mobile X-Ray Unit (on a Trailer) ‘Eyes’ Airport Luggage, Packages.” Materials Evaluation, Vol. 30, No. American Society for Nondestructive Testing, Columbus, OH, p. 54A. REFERENCES