8 NDTMarketplace PAUT Flaw Detector The SIUI SyncScan 3 is a 64:128PR PAUT flaw detector with four-channel time of flight diffraction (TOFD) and total focusing method (TFM) with image resolution up to 1024 × 1024. It is ideal for field work, just 7.7 kg with a 12.1 in. touch screen. Typical applications include austenitic weld inspection, ≥ 100 mm thick weld inspection, corrosion mapping, TFM, and more. SIUI (Shantou Institute of Ultrasonic Instruments Co. Ltd.) ɏ Shantou, Guangdong, China siui@siui.com ȡ siui.com Mobile UT A true single-operator solution, the IIS Mobile UT can also temporarily replace an in-line UT in emergency situations. The IIS Mobile UT is user-friendly and meets API 5L and 5CT requirements of NDT systems. It is powered by an OmniScan X3 handheld UT computer, includes two hot-swappable batteries to ensure nonstop operations, and has a modular design to allow phased array probes. Industrial Inspection Systems Ltd. ɏ Barrie, Ontario, Canada info@iisndt.ca ȡ iisndt.ca TOFD Transducers Make effective weld root corrosion assessments and inspections on hot assets, on-stream, without the need to shut down or isolate with the new HotSense™ time of flight diffraction (TOFD) transducers and wedges. HotSense transducers are compatible with commercial scanners and crawlers and can operate at continuous temperatures of –55 to +350 °C (–67 to +662 °F) without cooling or duty cycling. On-stream inspections enable safer plant operation and pre-shutdown screening to save time and money. Ionix HotSense transducers are compliant to ISO 22232-2 and ASTM E/1065 to meet any existing asset integrity UT procedures. Ionix Advanced Technologies ɏ Huddersfield, UK contact@ionix.at ȡ ionix.at ULTRASONIC TESTING Focus

NDTMarketplace 9 Ultrasonic System MAC’s Echomac® 25 mm rotary ultrasonic tester inspects tube, rod, and wire for high- precision applications. Product ranging from 5 to 25 mm in diameter can be inspected at high throughput speeds up to 200 fpm. Tube wall thickness down to 0.4 mm and tube lengths as short as 1.2 m can be successfully tested. Localized signal pre- amplification ensures optimum signal-to- noise ratio, and wide bandwidth transformer signal coupling allows frequency selection from 5 to 17 MHz. Echomac FD-6/6A instrumentation, used with the 25 mm rotary, provides outstanding inspection for ID/OD, longitudinal and transverse flaws, wall thickness, dimensional evaluation, eccentricity, and ovality. Magnetic Analysis Corp. ɏ Elmsford, NY info@mac-ndt.com ȡ mac-ndt.com PAUT Flaw Detector The OmniScan X3 64 flaw detector is equipped with advanced focusing capabilities and larger element-aperture capacity that can help you detect flaws in your assets before they become costly failures. Our Acoustic Influence Map (AIM) tool takes the guesswork out of creating your scan plan, and our new phase coherence imaging (PCI) feature improves small-defect sensitivity and penetration in noisy materials, all while easing your setup and simplifying sizing. The Omniscan X3 64 can help inspectors manage many of the most challenging inspections. Evident Scientific/Olympus ɏ Webster, TX info@olympus-ims.com ȡ evidentscientific.com Single-Axis String Encoders Single-axis string encoders are available for purchase with a draw length of either 1 or 2 m. These quadrature encoders are most often used for ultrasonic data encoding. These are built tough for hard-service field conditions. The standard 16-pin lemo adapter fits SX, MX2, X3 Gekko, and Mantis instruments. There is an integral magnetic base, and suction cups can be included at no extra cost for nonmagnetic materials. A handy “String Encoder Best Practices” blurb is included. Jimmy Ellis LLC ɏ Broken Arrow, OK utgeek@earthlink.net ȡ UTofPipelineDigs.com ASNT has also published ASNT Questions &Answers Book: Time of Flight Diffraction. This book covers Level II and III knowledge on time of flight diffraction, and will allow readers to determine if they possess a thorough understanding of this UT technique. WWW.ASNT.ORG/STORE ASNT… CREATING A SAFER WORLD!® ASNT has published ASNT Questions &Answers Book: Phased Array Ultrasonic Testing. This new Questions and Answers book contains sections on Level II and III knowledge, as well as a special section on full matrix capture, and is a good resource for readers with ultrasonic testing (UT) experience to evaluate their knowledge in these techniques. NEW ULTRASONIC TESTING BOOKS