Ñ BSR/ASME TDP-1-202x, Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fueled Plants. This is a revision and redesignation of ANSI/ ASME TDP-1-2013. This standard includes recommended practices concerned primarily with the prevention of water damage to steam turbines used for fossil-fuel-fired electric power generation. The practices address damage due to water, wet steam, and steam backflow into a steam turbine. The practices are applicable to conventional steam cycle, combined cycle, and cogeneration plants. The practices cover design, operation, inspection, testing, and maintenance of those aspects of the following power plant systems and equipment concerned with preventing the induction of water into steam turbines: (a) motive steam systems, (b) steam attemperation systems, (c) turbine extraction/admission systems, (d) feedwater heaters, (e) turbine drain system, (f) turbine steam seal system, (g) start-up systems, (h) condenser steam and water dumps, and (i) steam generator sources. Any connection to the turbine is a potential source of water either by induction from external equipment or by accumulation of condensed steam. The sources treated herein specifically are those found to be most frequently involved in causing damage to turbines. Although water induction into the high and intermediate pressure turbines has histor- ically been recognized as the most damaging, experience has shown that water induction in low pressure turbines can cause significant damage and should also be taken seriously. This standard is not intended to impose new require- ments retroactively for existing facilities. Ñ BSR/ASTM F2016-202x, Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings. This is a revision of ANSI/ASTM F2016- 2000 (R2018). Ñ BSR/AWS D17.3/D17.3M-202x, Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications. This is a revision and redesignation of ANSI/AWS D17.3/D17.3M- 2021. This specification covers the general requirements for the friction stir welding of aluminum alloys for aerospace applications. It includes the requirements for weldment design, qualification of personnel and procedures, fabri- cation, and inspection. Ñ BSR/AIAA S-081B-2018 (R202x), Space Systems – Composite Overwrapped Pressure Vessels. This is a reaffirmation of ANSI/AIAA S-081B-2018. This standard establishes baseline requirements for the design, analysis, fabrication, test, inspection, operation, and maintenance of composite overwrapped pressure vessels (COPVs). These COPVs are used for pressurized, hazardous, or nonhazardous liquid or gas storage in space systems including spacecraft and launch vehicles. This standard is applicable to COPVs constructed with a metal liner and a carbon fiber/polymer overwrap. Ñ BSR/ASA S2.29-2003 (R202x), Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery. This is a reaffirmation of ANSI/ASA S2.29-2003 (R2019). This standard contains procedures for the measurement and evaluation of the mechanical vibration of nonreciprocating machines, as measured on rotating shafts. It contains criteria for evaluating new machines and for vibration monitoring. This standard is related to the various parts of the ISO 7919 series that provides guidelines for the evalu- ation of different types of machines. The type of machinery covered in this part is shipboard machinery. This is a new ANSI standard, and there is, at present, no International Standards Organization version of this standard. ISO DRAFT INTERNATIONAL STANDARDS The following are standards that the International Organization for Standardization (ISO) is considering for approval. The proposals have received substantial support within the technical committee that developed them and are now being circulated to ISO members for comment and vote. Readers interested in reviewing or commenting on these standards should order copies from ANSI. Ñ ISO/DIS 18893, Mobile elevating work platforms – Safety principles, inspection, main- tenance and operation Ñ ISO/DIS 4628-6, Paints and varnishes – Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 6: Assessment of degree of chalking by tape method Ñ ISO/DIS 8065, Composites and reinforcements fibres – Mechanoluminescent visualization method of crack propagation for joint evaluation Ñ ISO/DIS 14127, Carbon-fibre-reinforced compos- ites – Determination of the resin, fibre and void contents Ñ ISO/DIS 16311-2, Maintenance and repair of concrete structures – Part 2: Assessment of existing concrete structures Ñ ISO/DIS 22928-1, Rare earth – Analysis by wavelength dispersive X-ray fluorescence spec- trometry (WD-XRFS) – Part 1: Determination of composition of rare earth magnet scraps using standardless XRF commercial packages Ñ ISO/DIS 18563-3, Non-destructive testing – Characterization and verification of ultrasonic phased array equipment – Part 3: Complete systems Ñ ISO 18119:2018/DAmd 2, – Amendment 2: Gas cylinders – Seamless steel and seamless aluminium-alloy gas cylinders and tubes – Periodic inspection and testing – Amendment 2 Ñ ISO/DIS 5735-1, Railway infrastructures – Non-destructive testing on rails in track – Part 1: Requirements for ultrasonic inspection and evaluation principles SCANNER |STANDARDSUPDATE LEARN WITH ASNT EDUCATION Whether you are looking for engaging professional development or a more convenient way to obtain continuing education credits to advance your career, ASNT Education provides the knowledge and skills current and aspiring NDT professionals need to be successful and remain competitive in an ever-changing workplace. From face-to-face courses to online instruc- tion, you’re in control of your profes- sional development, no matter where you are in your career. ASNT Education is focused on giving you the tools you need to do your best work. Visit asnt. org/education to explore your options. |SOCIETYNOTES 24 M A T E R I A L S E V A L U A T I O N • J U L Y 2 0 2 3 2307 ME July dup.indd 24 6/19/23 3:41 PM

2023 10th ECCOMAS Thematic Conference on Smart Structures and Materials 3–6 July, Patras, Greece smart2023.eu 13th ECNDT 3–7 July, Lisbon, Portugal ecndt2023.org SAMPE China 2023 Conference and Exhibition 5–7 July, Beijing, China sampechina.org European Congress of Radiology 5–9 July, Vienna, Austria myesr.org/congress Reliability, Maintenance &Managing Risk Conference 27–28 July, Minneapolis, Minnesota asqrrd.org/rmmr_conference 17th International Symposium on Nondestructive Characterization of Materials 15–17 August, Dübendorf, Switzerland asnt.org/events ICENDE 2023 24–26 August, Pune, India icende.in 8th Railway Forum 6–7 September, Berlin, Germany railwayforum.eu 60th Annual British Conference on NDT 12–14 September, Northampton, UK bindt.org National Pavement Preservation Conference 18–21 September, Indianapolis, IN tsp2pavement.pavement preservation.org Aerospace Test &Development Show 19–20 September, Toulouse, France aerotestdevelopment show.com CONAENDI &IEV 2023 20–22 September, São Paulo, Brazil conaend.org.br/2023 FCTM-ESOPE 26–27 September, Paris, France fctm-esope.com Welding Automation Expo &Conference 10–12 October, Columbus, OH aws.org SMRP 31st Annual Conference 16–19 October, Orlando, FL smrp.org RE:Wind 2023 23–24 October, Berlin, Germany windcongress.com Probabilistic Safety Assessment &Management Topical Conference 23–25 October, Virtual conferences.illinois .edu/psam ASNT 2023: The Annual Conference 23–26 October, Houston, TX asnt.org/events The Quality Show 24–26 October, Rosemont, IL qualitymag.com Congress-Wide Symposium on NDE &SHM 29 October–2 November, New Orleans, LA asme.org Inspection Expo &Conference 8–10 November, Austin, TX aws.org 4th Asia-Oceania Conference on Neutron Scattering 18–23 November, Dongguan, China aonsa.org/aocns World Nuclear Expo 28–30 November, Villepinte, France world-nuclear-exhibition.com 2024 IR/INFO 2024 14–17 January, Orlando, FL infraspection.com Reliability and Maintainability Symposium 22–25 January, Albuquerque, New Mexico rams.org 13th International Conference on Industrial Computed Tomography (iCT2024) 6–9 February, Wels, Austria ict-conference.com/2024 2024 AMUG Conference 10–14 March, Chicago, IL amug.com NASCC: The Steel Conference 20–22 March, San Antonio, TX nascc.aisc.org 20th WCNDT 27 May–31 May, Incheon, Korea 20thwcndt.com FABTECH Canada 11–13 June, Toronto, ON, Canada canada.fabtechexpo.com European Congress of Radiology 3–7 July, Vienna, Austria myesr.org/congress ASNT 2024: The Annual Conference 11–14 November, Las Vegas, NV asnt.org/events NDTEVENTS |SCANNER |ASNTONLINE Basic Exam Prep Course 10–14 JULY Time: 8:00 a.m. to 5:00 p.m. (ET) ASNT Learn Webinar* 12 JULY Topic: Automated Defect Recognition and Artificial Intelligence (AI) in Digital Radiography Speaker: Lennart Schulenburg Time: 3:00 p.m. (ET) MT Exam Prep Course 17–19 JULY Time: 8:00 a.m. to 5:00 p.m. (ET) Deadline to register/ transfer/cancel: 3 July PT Exam Prep Course 20–21 JULY Time: 8:00 a.m. to 5:00 p.m. (ET) Deadline to register/ transfer/cancel: 6 July VT Exam Prep Course 24–26 JULY Time: 8:00 a.m. to 5:00 p.m. (ET) Deadline to register/ transfer/cancel: 10 July ISQ – UT Thickness Prep Course 24–26 JULY Time: 8:00 a.m. to 5:00 p.m. (ET) Membership Mondays* 31 JULY Topic: Researching NDT Time: 7:00 a.m. and 4:00 p.m. (ET) ET Exam Prep Course 31 JULY–2 AUGUST Time: 8:00 a.m. to 5:00 p.m. (ET) Deadline to register/ transfer/cancel: 17 July Dates, times, and topics are subject to change. For more information, or to register for events, go to asnt.org. To affiliate with the Virtual Section, go to asnt.org Membership Sections Virtual Section. *Free registration for ASNT members. Looking for NDT Training Course listings? Course listings have moved online and can be viewed on asnt.org Learn Educational Directory. To add or update your organization’s listing online, email ndtoutreach @asnt.org. J U L Y 2 0 2 3 • M A T E R I A L S E V A L U A T I O N 25 2307 ME July dup.indd 25 6/19/23 3:41 PM