Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 113
Nondestructive Evaluation of Hot Cell Liner Bricks by Radiometric Testing, Feature, S. Viswanathan, S.
Chandrasekaran, and B. Venkatraman, ME, Vol. 79, No. 2, February 2021, pp. 106–112.
Nondestructive Evaluation of Medical Implant Devices by Holographic Interferometry and Optical Correlation,
James W. Wagner and Bradley D. Gunther, ME, Vol. 37, No. 13, December 1979, pp. 59–63.
Nondestructive Evaluation of Printed Circuit Boards by Means of Resistance Measurement, Bernard Stiefeld, ME,
Vol. 30, No. 9, September 1972, pp. 181–188.
Nondestructive Evaluation Performance in Predicting Failure Strength of Spherical Composite Specimens with
Implanted Flaws, W.D. Brosey, M.T. Calfee, J.W. Whittaker, Edmund G. Henneke, II, Daniel Post, K.L. Reifsnider
and Robert A. Blake, Jr., ME, Vol. 48, No. 9, September 1990, pp. 1090–1095.
Nondestructive Evaluation with Optical Holography, Renée S. Davis, ME, Vol. 47, No. 7, July 1989, pp. 794–797.
Nondestructive Evaluation, Gerold H. Tenney, ME, Vol. 28, No. 6, June 1970, pp. 11A–14A, 16A, 18A.
Nondestructive Evaluation: The Cornerstone of Plant Life Extension, Gary J. Dau, ME, Vol. 47, No. 9, September
1989, pp. 1046, 1049–1050, 1052.
Nondestructive Examination Duties of the Inspector during Boiler Repair or Alteration, James A. Sowell, ME, Vol.
50, No. 5, May 1992, pp. 589–590.
Nondestructive Examination of FFTF Fuels and Other Core Components, J.C. Spanner and C.N. Jackson, Jr., ME,
Vol. 34, No. 10, October 1976, pp. 219–223, 229.
Nondestructive Gaging with Radiation Sources, Renée S. Davis, ME, Vol. 47, No. 9, September 1989, pp. 1054,
1056, 1058, 1060.
Nondestructive Grain Size Measurements with Ultrasonics, D.L. Worlton, NDT, Vol. 13, No. 6, November-
December 1955, pp. 24–26.
Nondestructive Inspection in the Propulsion Industry, Sharon Vukelich, ME, Vol. 60, No. 7, July 2002, p. 869.
Nondestructive Inspection of Aging Aircraft Structure, Donald J. Hagemaier, ME, Vol. 48, No. 12, December 1990,
pp. 1499–1500, 1502–1504, 1506–1507, 1509, 1511–1512.
Nondestructive Inspection of Castings, Clyde L. Frear and Robert E. Lyons, IRNDT, Vol. 5, No. 3, Winter 1946–47,
pp. 18–25, 28–33.
Nondestructive Inspection of Jet Engine Assemblies and Components, RenéeS. Davis, ME, Vol. 48, No. 12,
December 1990, pp. 1485–1486, 1488–1490.
Nondestructive Inspection of Miniature Aluminum Welds in Composite Structure, Alexander J. Rogovsky and G.R.
Holmquist, ME, Vol. 42, No. 3, March 1984, pp. 318–324.
Nondestructive Inspection of the JPDR Pressure Vessel, Susumu Suguri and Minoru Kawasaki, ME, Vol. 30, No. 8,
August 1972, pp. 163–171.
Nondestructive Inspection of Turbine-Generator Parts During Manufacture and Service, D.L. Sauer and R.G.
Matters, NDT, Vol. 20, No. 4, July-August 1962, pp. 254–260.
Nondestructive Inspection on the DC-10, Donald J. Hagemaier, H.J. McFaul and N.H. Radtke, ME, Vol. 27, No. 11,
November 1969, pp. 19A–20A, 25A–28A.
Nondestructive Inspection Requirements for Aboveground Storage Tanks, Charles N. Sherlock, ME, Vol. 54, No.
2, February 1996, pp. 145–146, 148–155.
Nondestructive Inspection Techniques for Multilayer Circuit Boards, G.B. Mathers, ME, Vol. 25, No. 6, June 1967,
pp. 148–152.
Nondestructive Inspection Validation Center, Revisiting the Aging Aircraft — A Resource for the FAA and Industry,
Chris Smith and Patrick L. Walter, ME, Vol. 53, No. 8, August 1995, pp. 900–902.
Nondestructive Material Characterization Using Electronic Speckle Pattern Interferometry, Thorsten Siebert and
René Krupka, ME, Vol. 64, No. 7, July 2006, pp. 717-723.
Nondestructive Material Testing Using a High-Intensity Ultraviolet Laser Source, Jacqueline A. Basu, ME, Vol. 65,
No. 6, June 2007, pp. 648-654.
Nondestructive Measurement of Adhesive Bond Strength in Honeycomb Panels, D.O. Thompson, R.B. Thompson
and G.A. Alers, ME, Vol. 32, No. 4, April 1974, pp. 81–85, 92.
Nondestructive Measurement of Coating Thickness Using Through Thickness Ultrasonic Velocity Measurements,
Anish Kumar, V. Shankar, T. Jayakumar, G. Srinivasan and Baldev Raj, ME, Vol. 60, No. 6, June 2002, pp. 791-
794.
Nondestructive Measurement of Density and Effective Atomic Number by Photon Scattering, Gilbert Berodias
and Gilles Peix, ME, Vol. 46, No. 9, August 1988, pp. 1209–1213.
Nondestructive Measurement of Microstructure Evolution in Ceramics, T.N. Claytor, H.M. Frost, T.H. Feiertag,
G.A. Sheppard and P.D. Shalek, ME, Vol. 47, No. 5, May 1989, pp. 532, 534–535, 537.
Nondestructive Measurement of the Quality of Electroexplosive Interfaces, W.D. Harwood and L.G. Stewart, ME,
Vol. 26, No. 12, December 1968, pp. 254–256, 260.
Nondestructive Measurements of Cold Work in Type 316 Stainless Steel, C.J. Renken, Karl J. Reimann and Harold
Berger, ME, Vol. 32, No. 6, June 1974, pp. 109–116.
Nondestructive Microwave Thickness Measurements of Dielectric Slabs, Reza Zoughi and Michael Lujan, ME, Vol.
48, No. 9, September 1990, pp. 1100–1105.
Nondestructive Potentiostatic Etching Technique for the Detection and Quantification of Preexisting Plastic Strain
in Austenitic Stainless Steel, Shota Hokari, Akiyoshi Suzuki, and Yutaka Watanabe, ME, Vol. 74, No. 9,
September 2016, pp. 1287–1295.
Nondestructive Pressure Testing of Piping, Helmut Thielsch, ME, Vol. 22, No. 1, January 1964, pp. 26–27.
Nondestructive Resonance Testing using Time and Frequency Domain Techniques, Osama Jameel, Dipikia
Subramanian and Sangram Redkar, ME, Vol. 72, No. 4, April 2014, pp. 443–450.
Nondestructive System for the Inspection of Solder Joints, Willard L. Zinke, ME, Vol. 22, No. 5, May 1964, pp.
219–224.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 114
Nondestructive Test for Measuring the State of Heat Treatment in Closure Welds, Caius V. Dodd and C.C. Lu, ME,
Vol. 30, No. 7, July 1972, pp. 142–148.
Nondestructive Test Methods for Specialty-Metals Production, C.S. Ferguson, ME, Vol. 33, No. 5, May 1975, pp.
22A, 24A, 26A, 28A.
Nondestructive Testing 1794: Cannon ‘Proofing’ Shown in Records, ME, Vol. 27, No. 9, September 1969, p. 50A.
Nondestructive Testing and Evaluation of Materials at the US Army Research Laboratory, Focus Paper, William H.
Green, Jennifer M. Sietins, and Christopher M. Kube, ME, Vol. 76, No. 7, July 2018, pp. 959–965.
Nondestructive Testing and Evaluation of Reinforced Concrete Bridge Decks: A Case Study, Cherif Amer-Yahia
and Todd Majidzadeh, ME, Vol. 76, No. 5, May 2018, pp. 643–653.
Nondestructive Testing and the Production Engineer, W.G. Cook, NDT, Vol. 15, No. 1, January-February 1957, pp.
54–59.
Nondestructive Testing at Penn State University, Joseph Rose, ME, Vol. 63, No. 8, August 2005, pp. 806-807.
Nondestructive Testing by Full-field Strains from Mechanoluminescent Sensors, Gunjin Yun, Mohammad Reza
Rahimi, Josh Weaver, and Ali Imani Azad, ME, Vol. 74, No. 6, June 2016, pp. 726–734.
Nondestructive Testing by High-Speed Thermography, Leif Bergstrom and Dietrich Baeu, ME, Vol. 27, No. 5, May
1969, pp. 25A–28A.
Nondestructive Testing Course for Engineering Technology Students, V. Genis, T. Midora, R. Bottari and A. Genis,
ME, Vol. 66, No. 4, April 2008, pp. 374-379.
Nondestructive Testing Doctoral Program at the College of William and Mary, Mark K. Hinders, ME, Vol. 62, No.
8, August 2004, pp. 833-834.
Nondestructive Testing Fights Terrorism, John P. Battema, ME, Vol. 44, No. 11, October 1986, pp. 1304, 1310,
1314, 1316.
Nondestructive Testing for Corrosion under Paint, J. Steve Cargill, Joseph A. Pecina, Steven M. Shepard, John D.
Weir, Reza Zoughi and Alan V. Bray, ME, Vol. 63, No. 2, February 2005, pp. 102-109.
Nondestructive Testing for Metal Parts Fabricated Using Powder-Based Additive Manufacturing, Lucas W.
Koester, Hossein Taheri, Timothy A. Bigelow, Peter C. Collins, and Leonard J. Bond, ME, Vol. 76, No. 4, April
2018, pp. 514–524.
Nondestructive Testing for Post-event Condition Assessement, Glenn Washer, ME, Vol. 64, No. 8, August 2006,
pp. 769-770.
Nondestructive Testing in a Unique Technical High School, Paul M. Caporali, NDT, Vol. 15, No. 1, January-February
1957, p. 25.
Nondestructive Testing in Additive Manufacturing (AM): An Introduction, Focus Letter, Ahmed Arabi Hassen, ME,
Vol. 76, No. 4, April 2018, p. 413.
Nondestructive Testing in Component Manufacturing, A.J. Heitner and C.D. Cherryholmes, NDT, Vol. 19, No. 2,
March-April 1961, pp. 113–115.
Nondestructive Testing in Construction of the Aircraft Carrier Saratoga, John L. Cahill, NDT, Vol. 14, No. 1, January-
February 1956, pp. 16–18.
Nondestructive Testing in Shipbuilding and Ship Repair, A.K. Hutton, NDT, Vol. 13, No. 1, January-February 1955,
pp. 27–31, 35.
Nondestructive Testing in the Automotive Industry, Robert B. Allured, NDT, Vol. 20, No. 3, May-June 1962, pp.
180–181.
Nondestructive Testing in the Netherlands from 1982 to 1985, G.M. van Dijk, ME, Vol. 44, No. 8, July 1986, pp.
970–982, 1012.
Nondestructive Testing in the View of Industry, Education and the Profession, Gerold H. Tenney, NDT, Vol. 11,
No. 6, July 1953, pp. 15–20.
Nondestructive Testing in Tropical Areas, Charles F. Meynart, NDT, Vol. 18, No. 1, January-February 1960, pp. 39–
40.
Nondestructive Testing Laboratory: 2001 ASNT Faculty Grant Award, Philip McNew, ME, Vol. 60, No. 8, August
2002, pp. 962-963.
Nondestructive Testing Leads the Way to Dense Powder Metal Parts, Salvatore A. LoPilato and A. Joseph DeLai,
ME, Vol. 29, No. 12, December 1971, pp. 275–280.
Nondestructive Testing Methods for Materials Evaluation, Donald J. Hagemaier, ME, Vol. 28, No. 6, June 1970,
pp. 25A–28A.
Nondestructive Testing Methods of Quartermaster Items and Aerial Delivery Evaluation, Roderick W. Browne,
NDT, Vol. 16, No. 5, Sep-Oct 1958, pp. 385–396.
Nondestructive Testing Needs in the Steel Industry, R. Creighton Booth and Russell N. Cressman, ME, Vol. 39, No.
12, November 1981, pp. 1130–1137.
Nondestructive Testing of 2017 Aluminum Copper Alloy Diffusion Welded Joints by an Ultrasonic Automatic
System, O. Debbouz and F. Navai, ME, Vol. 57, No. 12, December 1999, pp. 1263-1269.
Nondestructive Testing of a Plated Aluminum/Stainless Steel Joint, J.W. Dini, H.R. Johnson and G.N. Beeler, ME,
Vol. 32, No. 6, June 1974, pp. 124–132.
Nondestructive Testing of Advanced Composites, Donald J. Hagemaier and Robert H. Fassbender, ME, Vol. 37,
No. 7, June 1979, pp. 43–49.
Nondestructive Testing of Aircraft and Spacecraft Wiring, John E. White, Edward J. Tucholski and Robert E. Green,
Jr., ME, Vol. 61, No. 12, December 2003, pp. 1315-1320.
Nondestructive Testing of Aluminum-Copper Welds Using Acoustic Emission Techniques, Robert B. Steel and Carl
C. Popadick, ME, Vol. 34, No. 3, March 1976, pp. 64–69, 72.
Nondestructive Testing of Axial-Flow Rotors, S.G. Walker, ME, Vol. 23, No. 3, March 1965, pp. 140–143.