Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 144
Study on Characterizing for Corrosion Degrees of 1045 Steel with Nonlinear Ultrasonic Coefficients, Hanying Mao,
Juncheng Fu, Hongxian Zhang, Yan Tang, Hanling Mao, ME, Vol. 81, No. 10, October 2023,
https://doi.org/10.32548/2023.me-04332
Study on Multifractal Charactersitics of Acoustic Emission Sequence of Concrete with Different Steel Fiber
Content under Uniaxial Tension, Tech Paper, Yan Wang, Lijun Chen, Chao Yan, Na Wang, Jie Gu, Zhaozhu Wang,
and Haitao Zhao, ME, Vol. 78, No. 9, September 2020, pp. 1045–1054.
Study on Nonlinear Lamb Wave Test for Invisible Impact Damage on CFRP Laminates, Li Chenggeng, Chen
Zhenhua, Chen Weibing, Lu Chao, ME, 80 (3), March 2022: 43–51, https://doi.org/10.32548/2022.me-04191
Sub-inch Aerial Imaging for Bridge Deck Cracking Evaluation, S.E. Chen, M. Natarajan, C. Boyle and E. Hauser, ME,
Vol. 71, No. 1, January 2013, pp. 32–41.
Subsurface Corrosion Detection in Aircraft Lap Splices Using a Dual Frequency Eddy Current Inspection Technique,
Jeffrey G. Thompson, ME, Vol. 51, No. 12, December 1993, pp. 1398–1401.
Subsurface Water Path Detection in Concrete Structures Using Active Thermography, F. C. Sham, Y. Lo, Y. S. Chen
and Y. Y. Hung, ME, Vol. 67, No. 1, January 2009, pp. 28-31.
Success and Challenges for Ultrasonic Testing in NDT and SHM, Joseph L. Rose, ME, Vol. 68, No. 5, May 2010, pp.
494-500.
Suggestions for Standardization and Development of the Classical Methods of Nondestructive Testing, H.W.
Richard Seifert, NDT, Vol. 16, No. 2, March-April 1958, pp. 138–142.
Summary of Session on Recommendations for Technical Development and Standardization, Raymond A. Pulk,
NDT, Vol. 16, No. 2, March-April 1958, p. 152.
Summary of Session on the Basis of Optimum Test Method Selection, Raymond A. Pulk, NDT, Vol. 16, No. 2,
March-April 1958, pp. 92–94.
Summary of Session on the Relative Advantages and Limitations of Nondestructive Testing Methods, Raymond
A. Pulk, NDT, Vol. 16, No. 2, March-April 1958, pp. 134–136.
Summary of the SNT Symposium on Stainless Steel Brazed Honeycomb Structures, Robert C. McMaster, NDT, Vol.
17, No. 5, Sep-Oct 1959, pp. 263–269.
Summary/Conference on Emerging Techniques for Nondestructive Field Testing, Harold Berger, ME, Vol. 33, No.
7, July 1975, pp. 189–191.
Summer Section Activities and Upcoming Member Events, Henry M. Stephens, From the President, ME, Vol. 63,
No. 7, July 2005, p. 691.
Superconductor Research Conducted, ME, Vol. 46, No. 6, May 1988, p. 754.
Superheater and Reheater Boiler Tube-Life Estimation, Ivan Sprung and Vladimir A. Zilberstein, ME, Vol. 50, No.
8, August 1992, pp. 986–990.
Superposition of Eddy Current Probe Signals, David M. Horne, Satish Upda and William Lord, ME, Vol. 42, No. 7,
June 1984, pp. 930–933.
Supervoltage Computed Tomography for Large Aerospace Structures, Paul D. Tonner and James H. Stanley, ME,
Vol. 50, No. 12, December 1992, pp. 1434–1438, 1445.
Supplemental Inspections of Aging Aircraft, Donald J. Hagemaier, Paul R. Abelkis and Marilyn B. Harmon, ME, Vol.
44, No. 8, July 1986, pp. 989–997.
Supplementing Radiography With Ultrasonic Inspection of Ship Welds, George M. Bonnett, ME, Vol. 24, No. 1,
January 1966, pp. 23–26, 29.
Surer Detection of Faults in Winding Ropes, ME, Vol. 31, No. 9, September 1973, pp. 20A–22A.
Surface and Plate Waves in Layered Structures, Joseph L. Rose and Aleksander Pilarski, ME, Vol. 46, No. 5, April
1988, pp. 598, 600–602, 604–605.
Surface and Subsurface Crack Analysis in Steel using Magnetic Particle and Liquid Penetrant Testing, Bharat
Mehta, ME, Vol. 73, No. 4, April 2015, pp. 464–470.
Surface Relief D-Fiber Bragg Gratings for High-Temperature and Multidimensional Bend Sensing, Tyson L. Lowder,
Richard H. Selfridge and Stephen M. Schultz, Fellowship Award Paper, ME, Vol. 65, No. 10, October 2007, pp.
1042-1047.
Surface Roughness Influence on Eddy Current Electrical Conductivity Measurements, Mark P. Blodgett, Chizoba
Vivian Ukpabi and Peter B. Nagy, ME, Vol. 61, No. 6, June 2003, pp. 765-772.
Survey Assesses Member Satisfaction and Identifies NDT Industry Challenges, Betsy J. Blazar, ME, Vol. 66, No. 8,
August 2008, pp. 828-830.
Survey Assesses Member Satisfaction and Identifies NDT Industry Challenges, Betsy J. Blazar, ME, Vol. 66, No. 9,
September 2008, pp. 944-945.
Survey on the Activity of Commission V (Testing, Measurement and Control of Welds) of the International
Institute of Welding, Georges A. Homes, NDT, Vol. 16, No. 2, March-April 1958, pp. 171–172.
Susceptibility of Ultrasonic Attenuation in Metals to Heat Treatment, Steven Serabian, ME, Vol. 26, No. 3, March
1968, pp. 41–44.
Suspension Bridge Cables: Pathologies, Inspection, Alternative Materials, Monssef Drissi-Habti, Bojidar Yanev
amd Raimondo Betti, ME, Vol. 67, No. 12, December 2009, pp. 1379-1386.
Swept Frequency Eddy Current Material Profiling Using Radial Basis Function Neural Networks for Inversion,
Gopichand Katragadda, David Lewis, John Wallace and Jiatun Si, ME, Vol. 58, No. 1, January 2000, pp. 70-73.
SWRI Develops NDE System for Turbine Rotors, ME, Vol. 39, No. 8, July 1981, pp. 696–697.
Synchronous Multi-Sensor Monitoring for Additive Manufacturing, Tech Paper, Y. Plotnikov, D. Henkel, J. Burdick,
and K. Bourne, ME, Vol. 78, No. 2, February 2020, pp. 193–202.
Synthetic Focusing of Sound Beam Using Linear Array, Paritosh Nanekar, N. Jothilakshmi, Anish Kumar, and T.
Jayakumar, ME, Vol. 75, No. 6, June 2017, pp. 813–821.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 145
Synthetic Minority Oversampling and Linear Cross-Validated Support Vector Machine-based Recursive Feasture
Elimination to Classify Weld Flaws in Radiographic Images, Abdelhak Mahmoudi and Fakhita Regragui, ME, Vol.
73, No. 2, February 2015, pp. 186–197.
System for Ultrasonic Monitoring of Pipe-Wall Thinning in Coal Gasifiers, George C. Stanton and William A.
Ellingson, ME, Vol. 35, No. 4, April 1977, pp. 46–51.
Systems Level Considerations for Environmentally Responsive Fluorescent Penetrant Testing, Robert J. Malins,
Don McCall and George W. Rhodes, ME, Vol. 51, No. 3, March 1993, pp. 338–346, 348, 350–351 see also ME,
Vol. 51, No. 5, May 1993, p. 554 ME, Vol. 51, No. 6, June 1993, p. 728.
T
T&E Council Election, ME, Vol. 73, No. 7, July 2015, p. 912.
Tagged Adhesives for Improved Electromagnetic Inspection, W.G. Clarke, Jr., Rajender K. Sadhir and W.R. Junker,
ME, Vol. 48, No. 1, January 1990, pp. 60–64.
Tampoprint Quality Control by Artificial Vision, F. Truchetet and J.P. Cholley, ME, Vol. 55, No. 12, December 1997,
pp. 1361–1366.
Tandem Probe Ultrasonic Measurement of Cracks in Economizer Inlet Header Sections, Michael D.C. Moles and
Anthony L. Allen, ME, Vol. 42, No. 6, May 1984, pp. 803–807.
Tank-Bottom Leak Detection in Above-Ground Storage Tanks by Using Acoustic Emission, Ronnie K. Miller, ME,
Vol. 48, No. 6, June 1990, pp. 822–824, 826–827, 829.
Tasks and Operations of Technical Societies, C.H. Lorig, NDT, Vol. 19, No. 5, Sep-Oct 1961, pp. 329–334.
Tax Favored Competition: Is It Affecting Your Bottom Line?, Stephen P. Black, ME, Vol. 52, No. 10, October 1994,
pp. 1170–1171.
Tech Hint: Charles N. Sherlock, ME, Vol. 37, No. 12, November 1979, p. 30.
Tech Hint: Charles N. Sherlock, ME, Vol. 37, No. 9, August 1979, p. 58.
Tech Hint: George R. Henke, ME, Vol. 38, No. 1, January 1980, p. 42.
Tech Tips: “Failure of the X-ray Inverse Square Law,” Don Hagemaier, ME, Vol. 62, No. 11, November 2004, p.
1131.
Tech Tips: “Unrock” Your Search Unit, George Henke, ME, Vol. 55, No. 11, November 1997, p. 1233.
Tech Tips: A New Angle for Weld Inspection, William C. Plumstead, ME, Vol. 53, No. 4, April 1995, p. 488.
Tech Tips: A Shot of Couplant, Bill Perrin, ME, Vol. 54, No. 1, January 1996, p. 52.
Tech Tips: A Simple Method to Examine the Alignment of a Residual Stress Measuring X-Ray Diffractometer,
Claudia Kropas-Hughes and Edward Klosterman, ME, Vol. 60, No. 1, January 2002, p. 90.
Tech Tips: Accurate Scaling of Magnified Microfocus Radiographs, Bahman Zoofan, ME, Vol. 60, No. 7, July 2002,
p. 867.
Tech Tips: Accurate Source Location, Richard Gerhard, ME, Vol. 54, No. 9, September 1996, p. 1024.
Tech Tips: Acid Etching — An Alternative for Localized Penetrant Inspection, Roger W. Engelbart, ME, Vol. 53, No.
3, March 1995, p. 402.
Tech Tips: Balloon-Aided Radiography, Stuart Kleven, ME, Vol. 54, No. 5, May 1996, p. 587.
Tech Tips: Cal Block Blocks, George Henke, ME, Vol. 53, No. 7, July 1995, p. 819.
Tech Tips: Consistent Elliptical Exposures, William C. Plumstead, ME, Vol. 60, No. 5, May 2002, p. 614.
Tech Tips: Creating Laminations for Ultrasonic Testing Training Purposes, Bahman Zoofan, ME, Vol. 60, No. 10,
October 2002, p. 1156.
Tech Tips: Cutting Signal Confusion, Stuart Kleven, ME, Vol. 54, No. 1, January 1996, p. 52.
Tech Tips: D-Meter Resolution with an Analog Display, John M. Armstrong, ME, Vol. 54, No. 7, July 1996, p. 816.
Tech Tips: Damp Cloth in Sealable Plastic Bags for Removal of Excess Water Washable Penetrant, William
Plumstead, ME, Vol. 60, No. 2, February 2002, p. 149.
Tech Tips: Dealing with Particle Concentration, Tom Larkin, ME, Vol. 59, No. 9, September 2001, p. 1087.
Tech Tips: Determining Braze Coverage, Arthur Hoff, ME, Vol. 59, No. 8, August 2001, p. 979.
Tech Tips: Determining Weld Toe and Centerline Location in Butt Weld Radiography, Bahman Zoofan, ME, Vol.
60, No. 12, December 2002, pp. 1420.
Tech Tips: Developer Control, William E.J. McKinney, ME, Vol. 53, No. 9, September 1995, p. 1013.
Tech Tips: Difficulty Demagnetizing?, Joseph M. Carey, ME, Vol. 59, No. 6, June 2001, p. 793.
Tech Tips: Don’t Settle For Less, Albert Taha, ME, Vol. 53, No. 12, December 1995, p. 1377.
Tech Tips: Easier Handling of Acrylic Distance Amplitude Curve Templates, Bill Perrin, ME, Vol. 59, No. 5, May
2001, p. 610.
Tech Tips: Easy Marker Removal, Terry Massie, ME, Vol. 53, No. 8, August 1995, p. 898.
Tech Tips: Easy Radiographic Identification, Andy Boyer, ME, Vol. 59, No. 7, July 2001, p. 880.
Tech Tips: Elliptical Exposures Revisited, Bahman Zoofan, ME, Vol. 60, No. 8, August 2002, p. 961.
Tech Tips: Enhancing the Repeatability and Consistency of the Tool Steel Test Ring, Gerald Kulchytsky, ME, Vol.
61, No. 1, January 2003, p. 8.
Tech Tips: Estimating Volume When Replenishing Developer for Film Radiography, Bahman Zoofan, ME, Vol. 61,
No. 11, November 2003, p. 1212.
Tech Tips: Extendible UT Cable, Randy Lachermeier, ME, Vol. 53, No. 10, October 1995, p. 1179.
Tech Tips: Flat Bottomed Hole Verification, Randy Lachermeier, ME, Vol. 54, No. 5, May 1996, p. 587.
Tech Tips: Foolproof Radiograph Exposures, Bill Plumstead, ME, Vol. 55, No. 10, October 1997, p. 1153.
Tech Tips: Foreign Part Retrievals, Shannon J. Hansen, ME, Vol. 54, No. 9, September 1996, p. 1024.
Tech Tips: Gamma Radiography — No Longer a Pain in the Back, John Woollven, ME, Vol. 54, No. 7, July 1996, p.
816.