Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 142
Spectral Analysis of the Scattering of Elastic Waves from a Fluid-Filled Cylinder, Pier Paolo Delsanto, José D.
Alemar, Efraín Rosario, Anton Nagl and Herbert Überall, ME, Vol. 46, No. 7, June 1988, pp. 1000–1005.
Spectrographic Analysis of Additives in Oils, Lyle E. Calkins and M.M.White, IRNDT, Vol. 5, No. 3, Winter 1946–
47, pp. 41–50.
Spectroscopy and Materials Characterization, ME, Vol. 59, No. 2, February 2001, pp. 142-145.
Spectroscopy/Alloy Identification, ME, Vol. 61, No. 12, December 2003, pp. 1289-1290.
Spectrum Analysis of Acoustic Emission in A533-B Steel, L.J. Graham and G.A. Alers, ME, Vol. 32, No. 2, February
1974, pp. 31–37.
Split-Spectrum Technique as a Preprocessor for Enhanced Reliability in Ultrasonic Signal Analyses, Prasanna
Karpur, ME, Vol. 50, No. 6, June 1992, pp. 793–797.
Spot Weld Testing Dilemma: or, Good NDT, Poor Engineering, Emmanuel P. Papadakis, Back to Basics, ME, Vol.
59, No. 4, April 2001, pp. 479-480.
Spray-Scrubber Materials and Use Methods in Inspection Penetrant Processes, James R. Alburger, ME, Vol. 29,
No. 1, January 1971, pp. 13–19.
Spring Conference and Fifth Annual Research Symposium 1996, ME, Vol. 54, No. 6, June 1996, pp. 734–735.
Spring Conference and Fourth Annual Research Symposium 1995, ME, Vol. 53, No. 6, June 1995, pp. 738–739.
Spring Conference Attendees 1995, ASNT Surveys, ME, Vol. 53, No. 8, August 1995, pp. 906–907.
Spurious Echoes during Shear-Wave Examination through Weld Overlay, David S. Kupperman, ME, Vol. 46, No. 8,
July 1988, pp. 1114–1118.
Sputtering Target Arc Detection Using Acoustic Emission, Alexander Leybovich and R. Mark Ferdinand, ME, Vol.
59, No. 11, November 2001, pp. 1331-1335.
Staat Joins ASNT as Event/Exhibit Supervisor, Society News, ME, Vol. 64, No. 12, December 2006, p. 1156.
Staff Member (Renée S. Davis) Wins Awards, ME, Vol. 47, No. 8, August 1989, p. 902.
Standardization and Application of Ultrasonic Surface-Wave Inspection, George J. Binczewski, NDT, Vol. 15, No.
1, January-February 1957, pp. 36–40.
Standardization in Ultrasonic Testing, C.W. Cline and J.B. Morgan, NDT, Vol. 13, No. 4, July-August 1955, pp. 23–
27.
Standards in Infrared Thermography and Thermal Analysis, L. Terry Clausing, ME, Vol. 64, No. 11, November 2006,
pp. 1074-1076.
Standoff Through-wall Sensing at Ka-band, S. Liao, T. Elmer, S. Bakhtiari, N. Gopalsami, N. Cox, J. Wiencek and
A.S. Raptis, ME, Vol. 70, No. 11, November 2012, pp. 1136–1145.
Stanford Researchers Use Laser System for Production-Line Detection of Flaws, ME, Vol. 32, No. 2, February 1974,
p. 43A.
State of the Art Inspection of Aircraft Structures by Nondestructive Testing, Donald J. Hagemaier, ME, Vol. 33,
No. 9, September 1975, pp. 217–226, 231.
State of the Refinery NDT Art, Robert P. Buhrow, ME, Vol. 41, No. 13, December 1983, pp. 1517–1519.
State of the Technology: Ultrasonic Tomography, T.J. Gomm and J.A. Mauseth, ME, Vol. 57, No. 7, July 1999, pp.
747-752.
State-of-the-Art Review of Nondestructive Testing as Applied to Nuclear Pressure Vessels and Components, G.R.
Forrer and F.J. Sattler, ME, Vol. 33, No. 10, October 1975, pp. 20A–23A, 25A –27A.
Statistical Analysis of Hit/Miss Data, Jeremy S. Knopp and Li Zeng, ME, Vol. 71, No. 3, March 2013, pp. 322–329.
Statistical Analysis of UT Corrosion Date from Floor Plates of a Crude Oil Aboveground Storage Tank, Narayan R.
Joshi, ME, Vol. 52, No. 7, July 1994, pp. 846–849 Erratum, ME, Vol. 52, No. 11, November 1994, p. 1285.
Statistical Comparison for Selection of Inspection Procedure, John Mittleman, ME, Vol. 48, No. 2, February 1990,
pp. 240–243.
Statistical Evaluation of the Results of Nondestructive Tests Carried Out on SAP Reactor Pressure Tubes, Carlo
Albertini and Domenico Basile, ME, Vol. 28, No. 8, August 1970, pp. 182–188.
Statistical Method for Evaluating Penetrant Sensitivity and Reproducibility, Edwin O. Lomerson, Jr., ME, Vol. 27,
No. 3, March 1969, pp. 67–70.
Statistical Methods in Material Manufacturing and Evaluation, Nicholas J. Gianaris and Robert E. Green, Jr., ME,
Vol. 57, No. 9, September 1999, pp. 944-951.
Statistics – A Technical Focus in an NDT Journal? Jennifer Brown, ME, Vol. 73, No. 1, January 2015, p. 9.
Statistics Applied to Measurements in Ultrasonic Testing, J. Perdijon, ME, Vol. 46, No. 10, September 1988, pp.
1317, 1319–1320, 1322–1323.
Statistics Applied to the Acceptance Decision in Ultrasonic Testing, J. Perdijon, ME, Vol. 47, No. 7, July 1989, pp.
812, 814–815, 817, 819–821.
Statistics Applied to the Inference of Flaws in Ultrasonic Testing, J. Perdijon, ME, Vol. 46, No. 13, December 1988,
pp. 1666, 1668, 1670–1671 see also ME, Vol. 50, No. 3, March 1992, p. 324.
Status of Nondestructive Testing for Transportation Industries, Robert C. McMaster, ME, Vol. 33, No. 7, July 1975,
pp. 181–186, 192.
Steel Bar Inspection of Bridges using Gamma Rays, P.C. Peng and C.Y. Chi, ME, Vol. 71, No. 1, January 2013, pp.
43–48.
Steel Bridge Research, Inspection, Training, and Engineering Center at Purdue University, Robert Connor, Jason
Lloyd, and Glenn Washer, ME, Vol. 75, No. 1, January 2017, pp. 40–47.
Steel Rope Diagnostics by Magnetic NDT: From Defect Detection to Automated Condition Monitoring, Feature,
Vasily V. Sukhorukov, ME, Vol. 79, No. 5, May 2021, pp. 438–445.
Stepped-Frequency Ultrasonic Holography, Richard H. Bossi and B. Percy Hildebrand, ME, Vol. 46, No. 5, April
1988, pp. 659–670.
Stereoscopic Radiography, Leslie P. Dudley, IRNDT, Vol. 5, No. 1, Summer 1946, pp. 23–25, 39.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 143
Stereovision for Mode Identification, Shen-En Chen and Victor D. Baker, ME, Vol. 60, No. 4, April 2002, pp. 545-
551.
Stopper Head Defects, Clyde B. Jenni, IR, Vol. 3, No. 2, Fall 1944, pp. 32–33.
Strain Gage Identification of the Correction Procedure for Quantitative Thermoelastic Stress Analysis under Non-
adiabatic Conditions, Stefano Desiderati and Antonio Salerno, ME, Vol. 73, No. 6, June 2015, pp. 855–861.
Strange Magnetic Particle Pattern Around a Square Hole on the Workpiece Surface, Wei-Chang Zhong, ME, Vol.
59, No. 9, September 2001, pp. 1085-1086.
Strawn Named ASNT Manager, ME, Vol. 42, No. 4, April 1984, p. 364.
Stress Analysis by X-Ray Diffraction, C.R. Lewis, NDT, Vol. 8, No. 2, Fall 1949, pp. 18–22.
Stress Intensity Factors in Concrete by Moment Tensor Analysis of Acoustic Emission, Muzo C. Munwam and
Masayasu Ohtsu, ME, Vol. 57, No. 11, November 1999, pp. 1178-1182.
Stress Mapping with Eddy Currents, W.G. Clark, Jr. and Bruce J. Taszarek, ME, Vol. 42, No. 10, September 1984,
pp. 1272–1275.
Stress Measurement Apparatus Based on Pulsed Magnetic Field, Bing Han, Dongyan Huang, Tianli Hu, Xin Wang,
Weitao Zheng, and Tao Zhang, ME, Vol. 74, No. 8, August 2016, pp. 1161–1167.
Stress Waves in Isotropic Elastic Plate Excited by Circular Transducer, Hira Karagülle, James H. Williams, Jr. and
Samson S. Lee, ME, Vol. 44, No. 4, March 1986, pp. 455–462.
Stress-Corrosion Crack Detection and Characterization Using Ultrasound, B.L. Weil, ME, Vol. 27, No. 6, June 1969,
pp. 135–139, 144.
Stress-Strain Records at High Straining Rates, Francis G. Tatnall and Greer Ellis, NDT, Vol. 11, No. 8, November-
December 1953, pp. 32–34.
Structural Conservation of Robert Stephenson's High Level Bridge across the River Tyne, Graham Herdman, Tim
Abbott and Jon Powell, ME, Vol. 65, No. 3, March 2007, pp. 281-288.
Structural Health Monitoring by Periodic NDT: NDT for Bridge Maintenance, Frank Jalinoos, Ralf Arndt, Dryver
Huston and Jianhong Cui, ME, Vol. 67, No. 11, November 2009, pp. 1300-1307.
Structural Health Monitoring for New and Legacy Aircraft, Neil Goldfine and Jeff Kollgaard, ME, Vol. 61, No. 7,
July 2003, p. 837.
Structural Health Monitoring of Bridge Cables, Monssef Drissi-Habti, Raimondo Betti and Bojidar Yanev, ME, Vol.
67, No. 11, November 2009, pp. 1285-1292.
Structural Integrity of Fiber Reinforced Plastic Piping, Ahmed Arabi Hassen, Uday K. Vaidya, and Frank Britt, ME,
Vol. 73, No. 7, July 2015, pp. 918–929.
Structural Modeling and the Nondestructive Evaluation of Metal-Matrix Composites, W.G. Clark, Jr. and Jayashri
N. Iyer, ME, Vol. 47, No. 4, April 1989, pp. 460–465.
Structural Steel Building Weld Inspection, Robert L. Queen and W. Terrance Wisler, ME, Vol. 41, No. 7, June 1983,
p. 786.
Structural Testing of a Nickel Based Superalloy Metal Foam via NDT and Finite Element Analysis, Ali Abdul-Aziz,
G. Abumeri, Mohit Garg and P.G. Young, ME, Vol. 66, No. 9, September 2008, pp. 949-954.
Student Spotlight: Development of an X-Ray Exposure Chart Experiment No. 1, Richard Pfannenstiel, Gordon
Dobey and Don Ely, ME, Vol. 36, No. 7, June 1978, pp. 68–69, 71.
Student Spotlight: Diagnostic X-Ray Examinations—A Need to be Concerned, Joseph Bonelli, ME, Vol. 35, No. 9,
September 1977, pp. 51–53.
Student Spotlight: Discontinuity Detection Using Nondestructive Testing, Robert C. Cumings, ME, Vol. 35, No. 7,
July 1977, pp. 32–33.
Student Spotlight: Precision Ultrasonic Thickness Gauging on Plastic Tubing, Sinco B. Steendam, ME, Vol. 35, No.
6, June 1977, pp. 26–27.
Student Spotlight: Radiographic Sensitivity and Detail Visibility, Edward D. Sullivan, ME, Vol. 36, No. 2, February
1978, pp. 29–30.
Student Spotlight: Radiography on the March, Sophie M. Poudrier, ME, Vol. 35, No. 4, April 1977, pp. 30–32.
Student Spotlight: X-Ray Film Processing, Carol A. Watson, ME, Vol. 35, No. 11, November 1977, pp. 12, 14.
Student Travel Grant Awards, Awards and Honors, ME, Vol. 77, No. 10, October 2019, p. 1138.
Studies on Relief in X-Radiography, P.R. Vaidya, B. Ghosh and R. Krishnan, ME, Vol. 43, No. 11, October 1985, pp.
1443–1445, 1454.
Study of Acoustic Attenuation Trends in Permendur 49 Magnetostrictive Material, M Sheykholeslami, M
Allahdadi, M_ Zeighami, M Ghodsi, ME, 80 (9), September 2022: 44–50, https://doi.org/10.32548/2022.me-
04229
Study of Acoustic Velocity Variations in Line Pipe Steel, Edward A. Ginzel and Robert K. Ginzel, ME, Vol. 53, No. 5,
May 1995, pp. 598–603.
Study of Acoustic Velocity Variations in Line Pipe Steel, Edward A. Ginzel and Robert K. Ginzel, ME, Vol. 53, No. 5,
May 1995, pp. 598–603.
Study of Ancient Metal Artifacts by Ultrasonics, Giuliano Canella, Maurizio Marabelli, Mario Micheli and Federico
Monti, ME, Vol. 40, No. 2, February 1982, pp. 211–217.
Study Of Deformation Behavior of AISI 1025 Carbon Steel with Different Microstructures Using Metal Magnetic
Memory and Acoustic Emission Testing, W Singh, CK Mukhopadhyay, ME, 80 (6), June 2022: 44–53,
https://doi.org/10.32548/2022.me-04195
Study of Leak Detection Fluids, John Pastorello, ME, Vol. 49, No. 8, August 1991, pp. 1035–1037.
Study of the Discontinuity Parameters due to Cold Work for 3005 Aluminum Alloy using Positron Lifetime
Spectroscopy, M.A. Abd-El Rahman, E.A. Badawi, and Mohammed Salah, ME, Vol. 73, No. 12, December 2015,
pp. 1585–1598.