Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 150
The Development of Ultrasonic Methods for Material Testing in Poland, L. Filipczynski and I. Malecki, NDT, Vol.
17, No. 5, Sep-Oct 1959, pp. 276–280.
The DGS Chart as a Teaching Aid, L.H. Morse and G.R. Quinn, ME, Vol. 33, No. 6, June 1975, pp. 34A–36A.
The Eddy Current Slide Rule, Russell L. Brown, ME, Vol. 26, No. 6, June 1968, pp. 120–123.
The Eddy-Sonic Test Method, Ron Botsco, ME, Vol. 26, No. 2, February 1968, pp. 21–26.
The Effect of Experiment Variables on Industrial X-ray Micro-computed Tomography Sensitivity, D.J. Roth and
R.W. Rauser, ME, Vol. 73 No. 12, December 2015, pp. 1577–1584.
The Effect of Fabrication on Inclusion Type Defects and Their Ultrasonic Response, George J. Binczewski, NDT,
Vol. 18, No. 2, March-April 1960, pp. 93–98.
The Effect of Field Orientation Using Magnetic Particle Testing of Detection of Discontinuities, Wei-Chang Zhong,
ME, Vol. 58, No. 6, June 2000, pp. 807-812.
The Effect of Full Penetration on Laser-Induced Stress-Wave Emissions during Laser Spot Welding, Lorne Weeter
and Charles Albright, ME, Vol. 45, No. 3, March 1987, pp. 353–357.
The Effect of Grain Size on Flaw Visibility Enhancement Using Split-Spectrum Processing, Nihat M. Bilgutay and
Jafar Saniie, ME, Vol. 42, No. 6, May 1984, pp. 808–814.
The Effect of High Temperature Exposure on Mechanical and Electrical Properties of Ti-6 Al-4V Sheet, A. Rosen,
S. Nadiv and M. Bohrer, ME, Vol. 33, No. 6, June 1975, pp. 135–137, 140.
The Effect of High Temperature Oxidation on the Eddy Current Conductivity of Ti-6Al-4V Alloy, A. Arieli, Yoseph
Bar-Cohen and A. Blas, ME, Vol. 36, No. 6, May 1978, pp. 62–64.
The Effect of Near-Surface Metallic-Property Gradients on Ultrasonic Critical-Angle Reflectivity, B.G. Martin and
F. Larry Becker, ME, Vol. 38, No. 1, January 1980, pp. 92–96.
The Effect of Source Configuration on Refracted Sound Fields, Elfgard Kühnicke, ME, Vol. 58, No. 3, March 2000,
pp. 470-475.
The Effect of Surface Roughness on Ultrasonic Echo Amplitude in Steel, Gerald V. Blessing, Peter P. Bagley and
Jimmy E. James, ME, Vol. 42, No. 11, October 1984, pp. 1389–1392, 1400.
The Effect of Water Path Variations on Ultrasonic Through-Transmission Sensitivity, C.J. Palmer, ME, Vol. 33, No.
6, June 1975, pp. 128–132, 134.
The Effective Dose for Radiographers in Nondestructive Testing: Proposed Conservative Method Validated by
Phantom Measurements, Y.S. Abu-Khaled and I.A. Al-Shakhrah, ME, Vol. 61, No. 4, April 2003, pp. 498-501.
The Effects of Adhesive Geometry and Type on Strain Transfer for Optical Fiber Strain Sensing, Douglas A. Harold,
J.C. Duke and Lindsay A. Harold, ME, Vol. 70, No. 12, December 2012, pp. 1411–1419.
The Electrical Behavior of Thermosetting Epoxy Resins During the Cure Cycle, B.G. Martin, ME, Vol. 35, No. 6,
June 1977, pp. 48–50, 55.
The Electron Microscope, James Hillier, IRNDT, Vol. 6, No. 1, Summer 1947, pp. 25, 28–31.
The Energetics of Acoustic Emission Source Characterization, Roger B. Clough, ME, Vol. 45, No. 5, May 1987, pp.
556–563.
The Engineer at Large, John A. Adam, Alexander H. Flax and Mary Golladay, ME, Vol. 44, No. 11, October 1986,
pp. 1274–1275.
The Engineer’s Challenge in Today’s Scientific and Technological World, Gerold H. Tenney, ME, Vol. 28, No. 4,
April 1970, pp. 37A–39A.
The Evaluation of Bond Quality in Honeycomb Panels Using Ultrasonic Surface Wave Techniques, E.T. Hughes and
E.B. Burstein, NDT, Vol. 17, No. 6, November-December 1959, pp. 373–377.
The Examination of Fusion-Cast Refractory Blocks by Gamma-Radiography, C.F. Griffith and W.B. Price, NDT, Vol.
13, No. 1, January-February 1955, pp. 33–35.
The Feasibility of Fluorography above 150 kV, D. Polansky and Donald T. O’Connor, NDT, Vol. 12, No. 6,
November-December 1954, pp. 27–34, 46.
The Federation of Materials Societies, Nathan E. Promisel, ME, Vol. 32, No. 9, September 1974, pp. 22A–26A.
The First Picture: A Review on the Initial Steps in the Development of Eight Branches of Nondestructive Testing,
Friedrich Förster, ME, Vol. 41, No. 13, December 1983, pp. 1477–1488.
The Focusing X-Ray Tube, Otto E. Berg, NDT, Vol. 8, No. 2, Fall 1949, pp. 12–14.
The Fundamental Action of Intensifying Screens in Gamma Radiography, E.L. Harrington, H.E. Johns, A.P. Wiles
and C. Garrett, NDT, Vol. 8, No. 2, Fall 1949, pp. 23–27, 30.
The Fundamentals of Differential Radiation Measurements, Richard A. Nickerson, NDT, Vol. 16, No. 1, January-
February 1958, pp. 24–27, 41.
The Fundamentals of Differential Radiation Measurements, Richard A. Nickerson, NDT, Vol. 16, No. 2, March-
April 1958, pp. 157–161.
The Fundamentals of X-Ray Spectroscopy, Donald F. Clifton, IR, Vol. 3, No. 1, Summer 1944, pp. 19–22.
The Future of the ASNT Central Certification Program, Henry M. Stephens, From the President, ME, Vol. 63, No.
2, February 2005, pp. 90-91.
The Geiger-Mueller X-Ray Spectrometer, F.G. Firth, IR, Vol. 4, No. 4, Spring 1946, pp. 17–21, 47.
The General Electric Industrial Betatron, Theodore W. Dietz and Lloyd L. Call, NDT, Vol. 11, No. 5, May 1953, pp.
9–14.
The Generated Reaction Field Method of Detecting Defects in Steel Bars, W. Lord and D.J. Oswald, ME, Vol. 29,
No. 2, February 1971, pp. 21–27.
The German Röntgen Museum, Dietmar Henning, ME, Vol. 45, No. 5, May 1987, pp. 536–537.
The Great Neutron Knows All, ME, Vol. 42, No. 1, January 1984, pp. 18–19.
The Immersed Ultrasonic Inspection of Metal Plate, Robert W. McClung, NDT, Vol. 17, No. 5, Sep-Oct 1959, pp.
270–275.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 151
The Impact of Environmental Concerns on Penetrant Inspection Materials, Grover L. Hardy and William E. Mooz,
ME, Vol. 50, No. 11, November 1992, pp. 1283–1285.
The Impact of Science on Our Future, Donald W. Kerst, NDT, Vol. 17, No. 4, July-August 1959, pp. 217–219.
The Implementation of a Computerized Ultrasonic Scan System, Vicki E. Panhuise, Larry A. Richmond and Ronald
E. Novak, ME, Vol. 42, No. 2, February 1984, pp. 231–238.
The Importance of Being Active—Internationally, George C. Wheeler, ME, Vol. 49, No. 11, November 1991, pp.
1430–1431.
The Importance of Standardization, George Moran and Jack Spanner, ME, Vol. 54, No. 8, August 1996, pp. 901–
904.
The Importance of Ultrasonics in the Inspection of the Convair 880 and 600 Jet Liners, Alvin N. Hammer, NDT,
Vol. 18, No. 6, November-December 1960, pp. 400–402.
The Industrial Use of Filtered Back Projection and Maximum Entropy Reconstruction Algorithms, Richard P.
Kruger and J.R. London, ME, Vol. 40, No. 12, November 1982, pp. 1285–1289, 1294.
The Influence of Inherent Filtration of the X-Ray Tube in Industrial Radiography and Fluoroscopy, E. Dale Trout
and A.L. Pace, IRNDT, Vol. 6, No. 1, Summer 1947, pp. 32–39.
The Influence of Reference Defect Geometry, Beam Angle and Frequency on Shear Wave Ultrasonic Test
Sensitivity, F.V. Ammirato, ME, Vol. 34, No. 2, February 1976, pp. 45–48.
The Influence of Some X-Ray Penetrameters on Crack Detection Capability, E.H. Ruescher, ME, Vol. 31, No. 8,
August 1973, pp. 152–154, 167.
The Influence of Stress on Electro-mechanical Impedance Measurements in Rail Steel, Robert Phillips, Xuan Zhu
and Francesco Lanza di Scalea, ME, Vol. 70, No. 12, November 2012, pp. 1213–1218.
The International State of the Art in Nondestructive Inspection of Welds with Special Emphasis on Flaw
Characterization, Hans-Jürgen Meyer, ME, Vol. 42, No. 6, May 1984, pp. 793–802.
The Investigation of Imperfections in Sheet Molding Compound, John C. Duke, Jr. and Samuel Russell, ME, Vol.
40, No. 5, April 1982, pp. 566–571.
The Investigation of Radioisotopes for the Inspection of Ship Welds, D. Polansky, D.P. Case and Edward L.
Criscuolo, NDT, Vol. 17, No. 1, January-February 1959, pp. 21–25.
The Involute Search Unit—A New Concept in the Ultrasonic Inspection of Pipe, Jim M. Toth and Benjamin J. Ross,
ME, Vol. 39, No. 9, August 1981, pp. 828–833.
The Journey of Nondestructive Testing, Nat Faransso, ME, Vol. 73, No. 2, February 2015, pp. 144–148.
The Long and Winding Road: Your Career Path in NDT, Michael P. Serabian, ME, Vol. 59, No. 4, April 2001, pp.
503-506.
The Longaberger Basket Building and Nondestructive Testing, Keren R. Baltzer, ME, Vol. 59, No. 10, October 2001,
pp. 1184-1187.
The Magfoil Method, Karl G. Walther, ME, Vol. 41, No. 5, April 1983, pp. 582–585.
The Magnaflux Corporation: Its History, Broad Aims and Policies: A History of Nondestructive Testing, Carl E. Betz,
ME, Vol. 34, No. 4, pp. 16A, 18A, 20A, 22A, 24A–26A.
The Magnetic Tape Recording of Ultrasonic Test Information, R.A. Youshaw, E.L. Criscuolo and C.H. Dyer, ME, Vol.
27, No. 2, February 1969, pp. 34–36, 41.
The Magnetostrictive Sensor Technology for Long Range Guided Wave Testing and Monitoring of Structures,
Hegeon Kwun, Sang Y. Kim and Glenn M. Light, ME, Vol. 61, No. 1, January 2003, pp. 80-84.
The Manufacturing NDT of Amorphous Bonds in Oilfield Tubulars, Ryuzo Yamada, Takao Shimizu, Hirotsugu Horio
and Roderic K. Stanley, ME, Vol. 59, No. 2, February 2001, pp. 131-136.
The Masking Liquid “ASL” for Radiography, Wataru Ichikawa and Tomio Senda, ME, Vol. 22, No. 8, August 1964,
pp. 363–365, 368 see also ME, Vol. 22, No. 9, September 1964, p. 408.
The Materials Crisis and ASNT, John P. Battema, ME, Vol. 31, No. 4, April 1973, p. 9A.
The Measurement of Crack Depths by the Direct-Current Conduction Method, J.G. Buchanan and R.C.A. Thurston,
NDT, Vol. 14, No. 5, Sep-Oct 1956, pp. 36–39, 43–44.
The Measurement of Stray Radiation, Robert S. Landauer, IR, Vol. 2, No. 2, Fall 1943, pp. 15–17.
The Measurement of Surface and Near-Surface Stress in Aluminum Alloys Using Ultrasonic Rayleigh Waves, B.G.
Martin, ME, Vol. 32, No. 11, November 1974, pp. 229–234.
The Measurement of Wall Thickness of Metal from One Side Only, By the Direct Current Conduction Method, J.G.
Buchanan, F.W. Marsh and R.C.A. Thurston, NDT, Vol. 16, No. 1, January-February 1958, pp. 31–35.
The Metallurgist’s Role in the Interpretation of Non-Destructive Testing, S.L. Henry, NDT, Vol. 11, No. 1, Summer
1952, pp. 16–20.
The Modulation Transfer Function and Effective Focal Spot as Related to Neutron Radiography, R.H. Bossi, J.L.
Cason and C.N. Jackson, Jr., ME, Vol. 30, No. 5, May 1972, pp. 103–108, 112.
The Moral Basis for Nondestructive Testing, Robert C. McMaster, ME, Vol. 41, No. 12, November 1983, p. 1361.
The Mutual Responsibilities of the Laboratories and Prime Contractors in the Field of Nondestructive Testing,
John P. Battema, NDT, Vol. 16, No. 5, Sep-Oct 1958, pp. 397–399, 396.
The Mysteries of the Shroud of Turin, Robert Rucker, ME, 80 (2), February 2022: 24–36,
https://doi.org/10.32548/2022.me-02022
The Myth of Certification, Charles J. Hellier, ME, Vol. 60, No. 11, November 2002, pp. 1319-1321.
The NDT Engineering Profession: A New Profile, Richard B. Socky, ME, Vol. 28, No. 1, January 1970, pp. 17A–20A.
The NDT Program at Cowley County Community College, Bruce Crouse, ME, Vol. 62, No. 8, August 2004, pp. 827-
828.
The Need for Customer-Supplier Ground Rules: Ultrasonically Inspected Quality of 4130 and 4340 Steel, Daniel E.
O’Halloran, NDT, Vol. 21, No. 1, January-February 1963, pp. 28–30.