Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 62
Evaluation of NDT Technologies for Organic Matrix Composite Testing, J. Steve Cargill, Joseph A. Pecina, Lawrence
Gintert and Donald Skelton, ME, Vol. 64, No. 9, September 2006, pp. 857-864.
Evaluation of Prestressed Concrete Beams based on Acoustic Emission Parameters, Jiangong Xu, Robert W.
Barnes and Paul H. Ziehl, ME, Vol. 71, No. 2, February 2013, pp. 176–185.
Evaluation of Shims, Gaussmeter, Penetrameter and Equations for Magnetic Particle Inspection, Donald
Hagemaier and John Petty, ME, Vol. 55, No. 5, May 1997, pp. 591–595.
Evaluation of Steel Ring Standards for Magnetic Particle Inspection, Bruce Bates, Donald J. Hagemaier, John Petty
and Chuck Armstrong, ME, Vol. 54, No. 10, October 1996, pp. 1207–1209.
Evaluation of Steel Ring Standards for Magnetic Particle Inspection, Donald J. Hagemaier, ME, Vol. 51, No. 9,
September 1993, pp. 1046–1051.
Evaluation of Stresses Generated by Welding in API 5L X65 Steel Using Acoustoelasticity, Auteliano A. Santos,
Marcilio Haddad Andrino, Don E. Bray and Roseana E. Trevisan, ME, Vol. 66, No. 8, August 2008, pp. 858-864.
Evaluation of the Effects of Preexposure in Marine Environments of Structural Glass Reinforced Composites by
Acoustic Emission Testing, G. Kotsikos, J.T. Evans, J.M. Hale and A.G. Gibson, ME, Vol. 58, No. 11, November
2000, pp. 1320-1325.
Evaluation of the Effects of Pulsed Magnetic Field Treatment as a Nondestructive Treatment for Magnetic
Materials, C.C.H. Lo, D.C. Jiles, M. Mina, M.J. Johnson, B. Koepke, L.C. Kerdus and J. Leib, ME, Vol. 60, No. 8,
August 2002, pp. 971-975.
Evaluation of the Polaroid Process for Industrial Radiography, James W. Dutli and James F. Torbert, NDT, Vol. 13,
No. 3, May-June 1955, pp. 23–26.
Evaluation of Three Different Approaches for the Ultrasound Attenuation Coefficient Measurement in Nodular
Cast Iron, Tech Paper, Mário João Santos and Jaime Batista Santos, ME, Vol. 77, No. 5, May 2019, pp. 605–612.
Evaluation of Tube-Film, Specimen-Film Alignment with Respect to Radiographic Distortion and Cut-Off, Robert
Taylor, IR, Vol. 1, No. 3, January 1943, pp. 24–27.
Evaluation of Ultrasonic Transducers by Cross-Sectional Mapping of the Near Field Using a Point Reflector, Tahir
M. Mansour, ME, Vol. 37, No. 7, June 1979, pp. 50–54.
Evaluation of Variables in the Measurements of Fuel Concentration Variations in Nuclear Fuel Rods, B.E. Foster
and S.D. Snyder, ME, Vol. 26, No. 2, February 1968, pp. 27–32.
Evaluation of Welding Residual Stress in a Nickel Alloy Pressure Vessel using the Ultrasonic Stress Measurement
Technique, Yashar Javadi and Seyed Hatef Mosteshary, ME, Vol. 73, No. 6, June 2015, pp. 862–868.
Evolution of an Automated Eddy Current Inspection System, Art Thompson, ME, Vol. 42, No. 12, November 1984,
pp. 1511–1514.
Evolution of an NDT Engineer—Model 1965, Carl E. Betz, ME, Vol. 24, No. 1, January 1966, pp. 39–42.
Evolution of an NDT Engineer—Model 1965, Carl E. Betz, ME, Vol. 39, No. 4, March 1981, pp. 371–373.
Evolution of Computed Tomography, John F. Moore, ME, Vol. 48, No. 5, May 1990, pp. 630–632, 634–638, 640.
Evolving Manufacturing Practices: Lessons for the Quality Control Engineer, Thomas W. Eagar, ME, Vol. 51, No.
10, October 1993, pp. 1184–1187.
Examining the Knuckle Region of Hanford’s Double Shell Waste Tanks, Allan F. Pardini, ME, Vol. 62, No. 11,
November 2004, pp. 1114-1120.
Examples of Ways to Evaluate Tolerances on Transducer Manufacturing Specifications, Frederick H.C. Hotchkiss,
Dana R. Patch and Matthew E. Stanton, ME, Vol. 45, No. 10, October 1987, pp. 1195–1202.
Excerpts from ‘A Technical Appreciation of the Sixth International Conference on Nondestructive Testing,’ R.S.
Sharpe, ME, Vol. 28, No. 8, August 1970, p. 18A.
Exhibitor’s Gallery: 2001 Fall Conference and Quality Testing Show, ME, Vol. 59, No. 10, October 2001, pp. 1135-
1174.
Exhibitor’s Gallery: 2002 Fall Conference and Quality Testing Show, ME, Vol. 60, No. 10, October 2002, pp. 1172-
1210.
Exhibitors Gallery 1997: Fall Quality Testing Show, ME, Vol. 55, No. 10, October 1997, pp. 1103–1133.
Exhibitors Gallery 1999, ME, Vol. 57, No. 10, October 1999, pp. 1007-1048.
Exhibitors Gallery, ME, Vol. 61, No. 10, October 2003, pp. 1087-1110.
Exhibitors Gallery, ME, Vol. 64, No. 10, October 2006, pp. 957-984.
Exhibitors Gallery: ME, Vol. 62, No. 10, October 2004, pp. 1002-1022.
Exhibitors Gallery: ME, Vol. 63, No. 10, October 2005, pp. 991-1014.
Exhibitors Gallery: ME, Vol. 65, No. 10, October 2007, pp. 983-1009.
Exhibitors Gallery: ME, Vol. 69, No. 10, October 2011, pp. 1157–1191.
Exhibitors Gallery: ME, Vol. 70, No. 10, October 2012, pp. 1155–1194.
Exhibitors Gallery: ME, Vol. 71, No. 10, October 2013, pp. 1145–1187.
Exhibitors Gallery: ME, Vol. 72, No. 10, October 2014, pp. 1211–1262.
Exhibitors Gallery: ME, Vol. 73, No. 10, October 2015, pp. 1291–1339.
Exhibitors Gallery: ME, Vol. 74, No. 10, October 2016, pp. 1381–1431.
Exhibitors Gallery: ME, Vol. 75, No. 10, October 2017, pp. 1225–1264.
Exhibitors Gallery: ME, Vol. 75, No. 3, March 2017, pp. 355–360.
Exhibitors Gallery: ME, Vol. 76, No. 10, October 2018, pp. 1311–1365.
Exhibitors Gallery: ME, Vol. 77, No. 10, October 2019, pp. 1181–1221.
Expanding Technology Adds Value to Testing, Visual and Remote Visual Inspection Procedures, Peter G. Lorenz,
ME, Vol. 55, No. 9, September 1997, pp. 1001–1004.
Expanding the Capability of a Laboratory Ultrasonic Testing Facility, M.W. Moyer and D.H. Gray, ME, Vol. 31, No.
10, October 1973, pp. 193–198, 204.
Expanding Use of Lasers in Nondestructive Testing, James Doyle, ME, Vol. 57, No. 4, April 1999, pp. 426-430.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 63
Expansion of Internship Training Program Opens Doors in Former Soviet Union, ME, Vol. 51, No. 10, October
1993, p. 1148.
Experience with the Acoustic Ranger—A Sound Method for Tube Inspection, Eric S. Morgan, ME, Vol. 39, No. 10,
September 1981, pp. 926–930.
Experimental Analysis of Ultrasonic Responses from Artificial Defects, Gerald J. Posakony, ME, Vol. 44, No. 13,
December 1986, pp. 1567–1572.
Experimental and Analytical Investigations of Acoustic Wave Propagation using a Reservoir and an Acoustic Lens,
Naoya Kasai, Kunihiko Mouri, Hideyuki Nakamura, Hiroaki Hatanaka, Talahiro Arakawa and Kauyoshi Sekine,
ME, Vol. 70, No. 4, April 2012, pp. 470–478.
Experimental Aspects of the Approximate Error Formula for Tomographic Reconstruction, Prabhat Munshi,
Michael Maisl and Holger Reiter, ME, Vol. 55, No. 2, February 1997, pp. 188–191.
Experimental Characterization of Ultrasonic Phased Arrays for the Nondestructive Testing of Concrete Structures,
Lawrence Azar and Shi-Chang Wooh, ME, Vol. 57, No. 2, February 1999, pp. 134-140.
Experimental Determination of Ultrasonic Attenuation Characteristics Using the Roney Generalized Theory,
Steven Serabian and Richard S. Williams, ME, Vol. 36, No. 8, July 1978, pp. 55–62.
Experimental Determination of Ultrasonic Transducer Frequency Response, Otto R. Gericke, ME, Vol. 24, No. 8,
August 1966, pp. 409–411.
Experimental Electro-Thermal Method for Nondestructively Testing Welds in Stainless Steel Pipes, Donald R.
Green, ME, Vol. 37, No. 11, October 1979, pp. 54–60.
Experimental Enhancements of Leaky Lamb Wave Dispersion Data Acquisition and Implementation Challenges to
NDT of Composites, Yoseph Bar-Cohen and Shyh-Shiuh Lih, ME, Vol. 58, No. 6, June 2000, pp. 801-806.
Experimental Evaluation of the Accuracy of AC Flux Leakage and Eddy Current Methods of Sizing Flaw Depths in
Ferromagnetic Seamless Steel Tubing, Ramasamy Palanisamy and Michael N. Curran, ME, Vol. 45, No. 12,
December 1987, pp. 1398–1403.
Experimental Investigation of Double-Sided Strain of Composites in Tensile Testing Using MultiCamera DIC,
Siyuan Fang, Xiaowan Zheng, Bicheng Guo, Danielle Zen, Lianxiang Yang, ME, 80 (11), November 2022: 42–51,
https://doi.org/10.32548/2022.me-04283
Experimental Investigation of Weld Root to Throat Crack Recognition by Double-Probe Ultrasonic Testing, Tech
Paper, Ye Zhi, Ji Bo-Hai, Wang Jie-Xiu, and Fu Zhong-Qiu, ME, Vol. 77, No. 4, April 2019, pp. 519–528.
Experimental Investigations of the Effect of Cold-Working on the Refraction of Head Waves in Railroad Rail, Magdi
Najm and Donald E. Bray, ME, Vol. 44, No. 4, March 1986, pp. 463–470.
Experimental Measurement of Metal Strength and Stiffness Using a Double-Side 3D Digital Image Correlation
Setup, Bernard Sia, Guobiao Yang, Junrui Li, and Liangxiang Yang, ME, Vol. 76, No. 9, September 2018, pp.
1207–1217.
Experimental Mechanics and Nondestructive Testing—A Partnership, Francis G. Tatnall, ME, Vol. 25, No. 2,
February 1967, pp. 28A–29A.
Experimental Mechanics in Design, Clarence R. Smith, ME, Vol. 25, No. 10, October 1967, pp. 30A–33A.
Experimental Neutron Radiographic Scatter Factors, I.R. Kraska and Harold Berger, ME, Vol. 26, No. 9, September
1968, pp. 187–190.
Experimental Nondestructive Characterization of an Aluminum Alloy Prepared by Powder-Bed Additive
Manufacturing, Tech Papers, David B. Witkin, Scott Sitzman, Yong Kim, Elinore Adelman, Paul Adams, and Neil
Ives, ME, Vol. 76, No. 4, April 2018, pp. 489–502.
Experimental Observation of Phased Array Guided Wave Application in Composite Materials, Hossein Taheri, Jikai
Du, Fereidoon Delfanian, ME, Vol. 75, No. 10, October 2017, pp. 1308–1316.
Experimental Study of Nondestructive Microstructual Characterization of Frication Stir Welded Joints, X. M. Zhao,
T. Gang and X. Y. Zhao, ME, Vol. 67, No. 4, April 2009, pp. 444-448.
Experimental Study On 3D Acoustic Emission Source Location of Concrete Based on Sparse Least-Squares Support
Vector Regression, Yan Wang, Jiahui Zhou, Na Wang, Lijun Chen, Haitao Zhao, ME, Vol. 81, No. 3, March 2023,
https://doi.org/10.32548/2023.me-04258
Experimental Study on Acoustic Emission Characteristics of SAP Mortar Self-Healing Process, Wang Na, Wang
Yan, Su Yihui, Zhao Haitao, ME, Vol. 81, No. 11, November 2023, https://doi.org/10.32548/2023.me-04359
Experimental Study on an Improved Joint Detection Technique for Concrete Structures, Feature, Hai-kuan Wu,
Zhi-le Shu, Chang-wu Liu, Yi-chen Miao, and Bao-xian Liu, ME, Vol. 78, No. 5, May 2020, pp. 537–546.
Experimental Work Employing Radioisotopes Cobalt and Selenium, Don McCutcheon, NDT, Vol. 7, No. 3, Winter
1948–49, pp. 7–14.
Experiments with 241Am-242Cm-Be for Neutron Radiography, J.P. Barton and M.F. Klozar, ME, Vol. 30, No. 11,
November 1972, pp. 236–241, 247.
Experiments with Foil-Film Combinations and Collimators for Neutron Radiography, B.L. Blanks and R.A. Morris,
ME, Vol. 24, No. 2, February 1966, pp. 76–80.
Explaining Differing Magnetic Particle Testing Results in the Same Specimens, Wei-Chang Zhong, Back to Basics,
ME, Vol. 63, No. 7, July 2005, pp. 710-712.
Explanation of High Residual Magnetism Found in Drill Stems, Wei-Chang Zhong, ME, Vol. 64, No. 4, April 2006,
pp. 394-395.
Exploiting Multiple View Geometry in X-ray Testing: Part I, Theory, Domingo Mery, ME, Vol. 61, No. 11, November
2003, pp. 1226-1233.
Exploiting Multiple View Geometry in X-ray Testing: Part II, Applications, Domingo Mery, ME, Vol. 61, No. 12,
December 2003, pp. 1311-1314.
Exploratory Tests of Corrosion of Reinforcing Steel in Concrete by X-Radiography, Isao Sekine and Masahiro
Fujinawa, ME, Vol. 42, No. 1, January 1984, pp. 121–126.