Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 164
Ultrasonic Test Procedure for Evaluating Fuel Clad Endcap Weld Joints of PHWRs, C.V. Subramanian, M.
Thavasimuthu, C. Rajagopalan, P. Kalyanasundaram and Baldev Raj, ME, Vol. 53, No. 11, November 1995, pp.
1290–1295.
Ultrasonic Test System for Longitudinal Fusion Welds in Pipe, W.C. Harmon and T.W. Judd, ME, Vol. 32, No. 3,
March 1974, pp. 45–49.
Ultrasonic Testing Calibration using Reference Blocks, Talaat Mohamed Haggag, ME, Vol. 73, No. 12, December
2015, pp. 1543–1548.
Ultrasonic Testing for Hydrogen Induced and Stress Corrosion Cracking in the Oil and Gas Industry, Abdul Wahab
Al-Mithin, G. Santhosh Kumar, Vinayak Sardesai and John William D’sa, ME, Vol. 68, No. 1, January 2010, pp.
37-44.
Ultrasonic Testing for Transverse Discontinuities in Dissimilar Welds: Theoretical and Experimental Results, V.
Munikoti, G. Brekow, U. Tessaro and A. Erhard, ME, Vol. 62, No. 11, November 2004, pp. 1148-1153.
Ultrasonic Testing Helps Keep Soap Box Derby Safe, ME, Vol. 37, No. 12, November 1979, p. 30.
Ultrasonic Testing in Nuclear Plants, Anmol Birring, James Williams, ME, 80 (6), June 2022: 24–30,
https://doi.org/10.32548/2022.me-04269
Ultrasonic Testing in Submarine Construction, Charles J. Hellier, ME, Vol. 24, No. 9, September 1966, pp. 512–
517.
Ultrasonic Testing in the North Sea: A Short Story, Michael Reilly, ME, Vol. 49, No. 2, February 1991, pp. 283–285.
Ultrasonic Testing of Adhesive Bonds Using the Fokker Bond Tester, Donald F. Smith and Charles V. Cagle, ME,
Vol. 24, No. 7, July 1966, pp. 362–370.
Ultrasonic Testing of Annealing Behavior and Texture and Determination of Texture Coefficients in Stainless Steel,
P. Palanichamy and M. Vasudevan, ME, Vol. 61, No. 9, September 2003, pp. 1020-1025.
Ultrasonic Testing of Austenitic Stainless Steel Weldments by Means of Transmitter-Receiver Type Longitudinal
Wave Angle-Beam Probe, Hiroshi Yoneyama, Saburo Shibata and Moritaka Kishigami, ME, Vol. 40, No. 5, April
1982, pp. 554–559.
Ultrasonic Testing of Bridge Pins and Hanger Straps, David E. Kelsey and Marcus A. Rotundo, ME, Vol. 48, No. 4,
April 1990, pp. 488, 490–491, 493 Errata, ME, Vol. 48, No. 6, June 1990, p. 796.
Ultrasonic Testing of Buried High-Level Radioactive Waste Storage Tanks, James B. Elder, Rodney V. Vande Kamp
and Bruce J. Wiersma, ME, Vol. 67, No. 8, August 2009, pp. 888-894.
Ultrasonic Testing of Cast Iron Pipe, G.B. Baumeister, NDT, Vol. 11, No. 3, January 1953, pp. 28–29.
Ultrasonic Testing of Composites 101, William Tapia, ME, Vol. 72, No. 1, July 2014, pp. 866–873.
Ultrasonic Testing of Concrete Structures, John S. Popovics, ME, Vol. 63, No. 1, January 2005, pp. 50-55.
Ultrasonic Testing of Concrete Using Split Spectrum Processing, Meric Karaoguz, Nihat Bilgütay, Akgül Tayfun and
Sandor Popovics, ME, Vol. 57, No. 11, November 1999, pp. 1183-1190.
Ultrasonic Testing of Irradiated Fuel Sheathing, H.B. Patel, A. Ditschun and A.E. Hunton, ME, Vol. 33, No. 3, March
1975, pp. 49–55.
Ultrasonic Testing of Material for Nuclear Components, Frank W. Armstrong, NDT, Vol. 15, No. 6, November-
December 1957, pp. 342–344, 350.
Ultrasonic Testing of Melt-Through Welds in Small-Diameter, Thin-Walled Tubing Couplers, Donald J. Hagemaier
and G.J. Posakony, ME, Vol. 26, No. 11, November 1968, pp. 221–226.
Ultrasonic Testing of Plates Containing Edge Cracks, James H. Williams, Jr., Hira Karagülle and Samson S. Lee, ME,
Vol. 44, No. 1, January 1986, pp. 100–107.
Ultrasonic Testing of Properties of 50 Year Old Concrete, Osama A. Mohamed and Kevin L. Rens, ME, Vol. 59, No.
12, December 2001, pp. 1426-1430.
Ultrasonic Testing of Ring-Type Joint Flanges for Detection of Chloride Stress Corrosion Induced Cracking, Rajesh
Bose and Robert Felch, ME, Vol. 65, No. 12, December 2007, pp. 1180-1185.
Ultrasonic Testing of the Clinch River Breeder Reactor Steam Generator Tubing, Robert A. Day and D.S. Kerr, ME,
Vol. 39, No. 1, January 1981, pp. 69–73.
Ultrasonic Testing of Welds by Time of Flight Diffraction: Codes, Guidelines and Standards, Anmol S. Birring and
Bharat K. Nidathavolu, ME, Vol. 63, No. 9, September 2005, pp. 910-914.
Ultrasonic Testing Procedures, J.B. Morgan, NDT, Vol. 17, No. 1, January-February 1959, pp. 32–36.
Ultrasonic Testing Sensitivity Selection Based on Probabilistic Techniques, Alexander J. Rogovsky and Joseph L.
Rose, ME, Vol. 37, No. 4, March 1979, pp. 47–55.
Ultrasonic Testing Signal Enhancement by Piece-wise Deconvolution, Amin Yaghootian, Farhang Honarvar, Mehdi
Zeighami and Anthony N. Sinclair, ME, Vol. 70, No. 5, May 2012, pp. 570–578.
Ultrasonic Testing Standards for Steel Products, J.B. Morgan, NDT, Vol. 20, No. 3, May-June 1962, pp. 167–172.
Ultrasonic Testing using Matrix Arrays for Discontinuity Detection, G. Brekow, H.-J. Montag, R. Boehm, D.
Brackrock and J. Kitze, ME, Vol. 72, No. 9, September 2014, pp. 1131–1137.
Ultrasonic Testing with a Signal Processing Method for Thermal Sprayed Coatings, Hiroaki Hatanaka, Ichiro
Kajigaya and Takahiro Arakawa, ME, Vol. 62, No. 6, June 2004, pp. 683-689.
Ultrasonic Testing with Lamb Waves, D.C. Worlton, NDT, Vol. 15, No. 4, July-August 1957, pp. 218–222.
Ultrasonic Testing, Donald Erdman, NDT, Vol. 8, No. 2, Fall 1949, pp. 28–30.
Ultrasonic Testing, ME, Vol. 61, No. 4, April 2003, pp. 502-504.
Ultrasonic Tests on Materials with Protective Coatings, H.L. Whaley, ME, Vol. 35, No. 12, December 1977, pp. 65–
68.
Ultrasonic Theory Applied to the Automatic Inspection of Welds, J.F. Lovelace and L.A. Luini, ME, Vol. 26, No. 10,
October 1968, pp. 204–210.
Ultrasonic Thickness Gaging Accuracy in Tubulars, Brian K. Wood, ME, Vol. 63, No. 9, September 2005, pp. 915-
918.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 165
Ultrasonic Thickness Inspection of Automotive Components, James K. Schmitt, ME, Vol. 28, No. 7, July 1970, pp.
145–152.
Ultrasonic Thickness Measurement of Multilayer Transparent Plastic Windows, Donald J. Hagemaier, ME, Vol. 32,
No. 6, June 1974, pp. 122–123.
Ultrasonic Thickness Measurements of Thin-Walled Composite Steel Pipes, Feature, Huai-shu Hou, Chao-lei Chen,
Bing-bing Zhu, and Bian Hu, ME, Vol. 77, No. 2, February 2019, pp. 166–173.
Ultrasonic Thickness Measurements with Lamb Waves, C.L. Frederick and D.C. Worlton, NDT, Vol. 20, No. 1,
January-February 1962, pp. 51–55.
Ultrasonic Thickness Variation Measurement of Hot Forged Cannon Tubes, John G. Rumbold and Stephen Krupski,
ME, Vol. 39, No. 10, September 1981, pp. 939–942.
Ultrasonic Time Domain Technique for Frequency Dependent Attenuation Measurement for Microstructural
Characterization of a Titanium Alloy, Anish Kumar, T. Jayakumar, Baldev Raj and K.K. Ray, ME, Vol. 61, No. 12,
December 2003, pp. 1321-1326.
Ultrasonic Tomography Comparison: Transmissive, Reflective and Compound B-Scan, T.J. Gomm and J.A.
Mauseth, ME, Vol. 59, No. 6, June 2001, pp. 788-793.
Ultrasonic Transducer Array Configuration for Interlaced Scanning, Kenneth H. Beck, ME, Vol. 46, No. 6, May
1988, pp. 771–778.
Ultrasonic Transducer Characterization Using the Combined Schlieren, Photoelastic and Raman Nath (SPRN)
System, Glenn Light, Ammol Singh and T. Rudwick, ME, Vol. 40, No. 7, June 1982, pp. 783–790.
Ultrasonic Transducer Characterization, Paul G. Kenny, Jeffrey J. Gruber and James M. Smith, ME, Vol. 45, No. 6,
June 1987, pp. 730–735.
Ultrasonic Transducer Focusing for Inspection of Cylindrical Material, Kenneth H. Beck, ME, Vol. 49, No. 7, July
1991, pp. 875–882 Errata, ME, Vol. 49, No. 12, December 1991, p. 1505.
Ultrasonic Transducer Selection for Fixed Water Path Scanning of a Range of Bar Sizes, Kenneth H. Beck, ME, Vol.
61, No. 4, April 2003, pp. 517-522.
Ultrasonic Transmission Tester, J.D. Ross and R.W. Leep, NDT, Vol. 15, No. 3, May-June 1957, pp. 152–154.
Ultrasonic Undersea Casing Void Detection Technique, Alex A. Bagarry, III, ME, Vol. 56, No. 5, May 1998, pp. 622–
623.
Ultrasonic Velocity as a Predictor of Density in Sintered Powder Metal Parts, Emmanuel P. Papadakis and Bradley
W. Petersen, ME, Vol. 37, No. 5, April 1979, pp. 76–80.
Ultrasonic Velocity C-Scans for Ceramic and Composite Material Characterization, Jeffrey J. Gruber, James M.
Smith and Robert H. Brockelman, ME, Vol. 46, No. 1, January 1988, pp. 90–96.
Ultrasonic Wave Characterization of Polymers, Ouk S. Lee and James H. Williams, Jr., ME, Vol. 49, No. 3, March
1991, pp. 351–355.
Ultrasonic Wave Propagation in Multilayer Ceramic Capacitor Structures Containing Cracks, Jie Zhu and Wenwu
Cao, ME, Vol. 65, No. 11, November 2007, pp. 1135-1138.
Ultrasonic Weld Inspection Using Rectangular Calibration Screen Overlays, William Steve Burkle, ME, Vol. 40, No.
10, September 1982, pp. 1068–1070.
Ultrasonic Weld Inspection—A Status Report, John E. Bobbin, NDT, Vol. 18, No. 3, May-June 1960, pp. 200–202.
Ultrasonic Weld Inspection, John E. Bobbin, NDT, Vol. 17, No. 1, January-February 1959, pp. 26–28.
Ultrasonic Weld Testing in Europe and the Attitude of Technical Control Authorities, J. Krautkramer, NDT, Vol. 20,
No. 5, Sep-Oct 1962, pp. 319–324.
Ultrasonic Weldment Inspections Currently in Use, Frank C. Parker, NDT, Vol. 20, No. 6, November-December
1962, pp. 387–393.
Ultrasonic/Radiographic Examination of Heavy-Wall Pressure Vessel Weldments, David E. Center and Robert J.
Roehrs, ME, Vol. 27, No. 5, May 1969, pp. 107–117.
Ultrasonically Mapping the Ply Layup of Composite Laminates, David K. Hsu, Dong Fei and Zhanjie Liu, ME, Vol.
60, No. 9, September 2002, pp. 1099-1106.
Ultrasonics as a Means of Rating Steel Cleanliness, J.B. Morgan, ME, Vol. 28, No. 6, June 1970, pp. 121–134, 144.
Ultrasonics for Nondestructive Testing, Wrap-up, ME, Vol. 73, No. 10, October 2015, pp. 1270–1271.
Ultrasound as a Possible Means of Examining Swaged Joints, Robert A. Day, ME, Vol. 31, No. 8, August 1973, pp.
164–167.
Ultrasound Inspection of Composite Materials, Gas Coupled Laser Acoustic Detection for, James N. Caron, Karl V.
Steiner, Yuqiao Yang and James B. Mehl, ME, Vol. 58, No. 5, May 2000, pp. 667-671.
Ultrasound Vibrothermography Applications for Nondestructive Discontinuity Detection, J.-M.A. Piau, A.
Bendada and X.P.V. Maldague, ME, Vol. 66, No. 10, October 2008, pp. 1047-1052.
Ultraviolet Sensors for the On-Line Monitoring of Sterile Packaging Materials, Ronald Pilchik, Krishnan
Balasubramaniam and Joseph L. Rose, ME, Vol. 48, No. 8, August 1990, pp. 995–1000.
Ultraviolet-A Lamp Technologies for Nondestructive Testing: The Challenges and a Path Forward, John C. Brausch,
Nicholas S. Heider and Rachel Mattis, ME, Vol. 71, No. 6, June 2013, pp. 768–777.
Ume, Charles, see Graham, George M., ME, Vol. 52, No. 5, May 1994, pp. 607–610.
Unbond Detection Using Ultrasonic Phase Analysis, S.A. LoPilato and S.W. Carter, ME, Vol. 24, No. 12, December
1966, pp. 690–696.
Uncovering Historical Treasures Using NDT, ME, Vol. 57, No. 7, July 1999, p. 736.
Understanding Eddy Current Array for High-Performance Inspections, Feature, Anne-Marie Allard, Marc Grenier,
Michael Sirois, and Casper Wassink, ME, Vol. 79, No. 10, October 2021, pp. 940–947.
Understanding Flash Thermography Steven M. Shepard, ME, Vol. 64, No. 5, May 2006, pp. 460-464.
Understanding the Basics of Signal Processing for Insight into How Time Domain Affects Spectral Analysis, Ken
Starry, ME, Vol. 70, No. 1, January 2012, pp. 41–46.