Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 162
Ultrasonic Inspection of T-Joint Welds, R.A. Youshaw, ME, Vol. 24, No. 1, January 1966, pp. 16–22, 29.
Ultrasonic Inspection of Thin Section Fusion Welds in Tractor Cabs, Richard C. Canada, ME, Vol. 36, No. 12,
November 1978, pp. 29–32.
Ultrasonic Inspection of Thin-Wall Piping By Manual Methods, John W. Collier, ME, Vol. 27, No. 4, April 1969, pp.
73–75, 84.
Ultrasonic Inspection of Turbine and Compressor Rotor Blades for Cracks and Other Flaws, Jens Gert Rasmussen,
NDT, Vol. 16, No. 3, May-June 1958, pp. 228–236.
Ultrasonic Inspection of Welds in Corrosion Resistant Alloy Piping, Anmol Birring, ME, Vol. 72 No. 12, December
2014, pp. 1468–1474.
Ultrasonic Inspection Procedures in Commercial Shipbuilding, Irving L. Stern, ME, Vol. 31, No. 5, May 1973, pp.
85–89.
Ultrasonic Inspection Using Automatic Recording and Frequency Modulated Flaw Detector, Donald C. Erdman,
NDT, Vol. 11, No. 8, November-December 1953, pp. 27–31.
Ultrasonic Inspection Using the Pitch-Catch Technique, M. William Moyer and Douglas L. Donsbach, ME, Vol. 37,
No. 5, April 1979, pp. 51–54.
Ultrasonic Maintenance Inspection of Aircraft Structures, Donald J. Hagemaier, ME, Vol. 34, No. 1, January 1976,
pp. 9–19.
Ultrasonic Measurement of Residual Stress in the Rims of Inductively Heated Railroad Wheels, Raymond E.
Schramm, Jacek Szelazek and A. Van Clark, Jr., ME, Vol. 54, No. 8, August 1996, pp. 929–934.
Ultrasonic Measurements in Wood, Renato S. Olivito, ME, Vol. 54, No. 4, April 1996, pp. 514–517.
Ultrasonic Measurements of Cold-Work Percentages in Type 316 Stainless Steel, Karl J. Reimann and Neill J.
Carson, ME, Vol. 31, No. 7, July 1973, pp. 128–132, 144.
Ultrasonic Method for Evaluating Strength Properties of Fiber Reinforced Composites, Alex Vary, ME, Vol. 36, No.
6, May 1978, p. 48.
Ultrasonic Methods for Near-Surface Flaw Detection, Otto R. Gericke, NDT, Vol. 19, No. 5, Sep-Oct 1961, pp. 335–
338.
Ultrasonic Monitoring of Ash Contents and MBTS Accelerator Mixed Nitrile Rubber during the Vulcanization
Process, Subhasis Mondal, Debasis Datta, ME, Vol. 81, No. 10, October 2023,
https://doi.org/10.32548/2023.me-04305
Ultrasonic Monitoring of Dislocations during Fatigue of Pearlitic Steel, Shant Kenderian, Robert E. Green, Jr. and
B. Boro Djordjevic, ME, Vol. 65, No. 5, May 2007, pp. 467-471.
Ultrasonic Monitoring of the Molten Zone of Single-Crystal Germanium, Cheng-Kuei Jen, Phillipe de Heering,
Peter Sutcliffe and Jean F. Bussière, ME, Vol. 49, No. 6, June 1991, pp. 701–707.
Ultrasonic Multiple Beam Technique Using Single Phased Array Probe for Detection and Sizing of Stress Corrosion
Cracking Austenitic Welds, Naoyuki Kono, Atsushi Baba and Kazuya Ehara, ME, Vol. 68, No. 10, October 2010,
pp. 1063-1070.
Ultrasonic NDE Technique for the Examination of Low-Pressure Turbine Disk Rims, Gurvinder P. Singh, Richard A.
Cervantes and Robert L. Spinks, ME, Vol. 41, No. 13, December 1983, pp. 1511–1516.
Ultrasonic NDT Methods for Weld Sensing, N.M. Carlson, J.A. Johnson, L.A. Lott and D.C. Kunerth, ME, Vol. 50,
No. 11, November 1992, pp. 1338–1343.
Ultrasonic NDT of a Thin Elastic Layer on a Viscoelastic Substrate, Rahul R. Bijai, Atul S. Ganpatye and Vikram K.
Kinra, ME, Vol. 65, No. 3, March 2007, pp. 323-328.
Ultrasonic NDT of Subsurface Cracks in Attenuating Nanocomposite, Anton F. Thomas and Hyunjune Yim, ME,
Vol. 65, No. 7, July 2007, pp. 740-751.
Ultrasonic NDT of Titanium Diffusion Bonding with Guided Waves, Rose, Joseph L., Wenhao Zhu and Masood
Zaidi, ME, Vol. 56, No. 4, April 1998, pp. 535–539.
Ultrasonic Non-Bond Inspection of Tubular Fuel Elements, M.L. McCowin and N.S. Beyer, ME, Vol. 26, No. 2,
February 1968, pp. 17–20.
Ultrasonic Nondestructive Bond Evaluation: An Analysis of the Problem, Henry H. Chaskelis and Alfred V. Clark,
Jr., ME, Vol. 38, No. 4, April 1980, pp. 20–26, 34.
Ultrasonic Nondestructive Evaluation Data with Computer Code to Predict the Remaining Life of Steam Turbine
and Generator Rotors, Glenn Cunningham, ME, Vol. 50, No. 5, May 1992, pp. 612–615.
Ultrasonic Nondestructive Evaluation Method for the Detection and Identification of Defects in Filament Wound
Glass Fiber-Reinforced Plastic Tubes, Yoseph Bar-Cohen, E. Harnik, M. Meron and R. Davidson, ME, Vol. 37, No.
8, July 1979, pp. 51–55.
Ultrasonic Nondestructive Evaluation of a Three-Layered Medium, Vikram K. Kinra, Paul Jaminet, Changyi Zhu
and Vasu Iyer, ME, Vol. 52, No. 8, August 1994, pp. 948–953.
Ultrasonic Nondestructive Optimization for Development of Resin Infusion Process Composite Co-cured, Ramesh
Kumar M., Srinivasa V., Suresh Chang Jangir and Sudheendra H.N., ME, Vol. 69, No. 11, November 2011, pp.
1313–1317.
Ultrasonic Nondestructive Test for the Detection of Improper Heat Treatment of Steel, Emmanuel P. Papadakis,
ME, Vol. 23, No. 3, March 1965, pp. 136–139.
Ultrasonic Nondestructive Testing of Large-scale Composites, B.Boro Djordjevic, ME, Vol. 72, No. 7, July 2014, pp.
922–927.
Ultrasonic Nondestructive Testing on Marble Rock Blocks, L. Vergara, J. Gosálbez, J.V. Fuente, R. Miralles, I. Bosch,
A. Salazar, A.M. López and L.E. Domínguez, ME, Vol. 62, No. 1, January 2004, pp. 73-78.
Ultrasonic Phased Array Technique in Rail for Crack-like Discontinuity Detection, Elmira Aminfar, Saeed
Mohammadzadeh, and Hamed Farahpour, ME, Vol. 73, No. 3, March 2015, pp. 360–367.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 163
Ultrasonic Phased Array Testing for an Isogrid Structural Element with Crack, D.J. Roth, R. P. Tokars, R. E. Martin
R. W. Rauser, J. C. Aldrin and E. J. Schumacher, ME, Vol. 68, No. 1, January 2010, pp. 76-83.
Ultrasonic Phased Array Testing Situations of Welded Components at NASA, D. J. Roth, J. C. Aldrin and E. J.
Schumacher, ME, Vol. 67, No. 1, January 2009, pp. 60-65.
Ultrasonic Phased Arrays for Nondestructive Inspection of Forgings, Hermann Wüstenberg, Bernhard Rotter,
Hans Peter Klanke and Dieter Harbecke, ME, Vol. 51, No. 6, June 1993, pp. 669–672 Erratum, ME, Vol. 51, No.
8, August 1993, p. 862.
Ultrasonic Phased Arrays for Weld Testing, Anmol S. Birring, ME, Vol. 66, No. 3, March 2008, pp. 282-284.
Ultrasonic Phased Arrays: An Introduction to the Technical Focus Issue, ME, Vol. 65, No. 1, January 2007, p. 23.
Ultrasonic Polar Scan Imaging of Damaged Fiber Reinforced Composites, L. Satyanarayan, John M. Vander Weide
and Nico F. Declerq, ME, Vol. 68, No. 6, June 2010, pp. 733-739.
Ultrasonic Prediction of Grain Size and Mechanical Properties in Plain Carbon Steel, Richard Klinman and Edward
T. Stephenson, ME, Vol. 39, No. 12, November 1981, pp. 1116–1120.
Ultrasonic Prediction of Grain Size, Strength and Toughness in Plain Carbon Steel, Richard Klinman, G.R. Webster,
F.J. Marsh and Edward T. Stephenson, ME, Vol. 38, No. 10, October 1980, pp. 26–32.
Ultrasonic Probability of Detection of Subsurface Flaws, Steven Serabian, ME, Vol. 40, No. 3, March 1982, pp.
294–298.
Ultrasonic Probes Using Shear Wave Crystals—Principles, Lawrence C. Lynnworth, ME, Vol. 25, No. 12, December
1967, pp. 265–277.
Ultrasonic Procedure for Inspecting Aluminum Aircraft Wheels, C.E. Guzi and J.W. Robertson, ME, Vol. 30, No. 5,
May 1972, pp. 109–112.
Ultrasonic Procedures for Predicting Adhesive Bond Strength, Joseph L. Rose and Paul A. Meyer, ME, Vol. 31, No.
6, June 1973, pp. 109–114.
Ultrasonic Properties of IIW Type Reference Blocks, Part 1: Measurements of Primary Properties, Terence P.
Lerch, Martin C. Renken and Christopher M. Fortunko, ME, Vol. 58, No. 9, September 2000, pp. 1075-1079.
Ultrasonic Properties of IIW Type Reference Blocks, Part 2: Variability of Angle Beam Response, Terence P. Lerch,
Martin C. Renken and Christopher M. Fortunko, ME, Vol. 58, No. 10, October 2000, pp. 1235-1239.
Ultrasonic Pulse-Echo Instrument Linearity Measurement, Jeffrey A. Bailey, ME, Vol. 35, No. 5, May 1977, pp. 64–
68.
Ultrasonic Pulse-Echo Techniques for Evaluating Thickness, Bonding and Corrosion, Donald C. Erdman, NDT, Vol.
18, No. 6, November-December 1960, pp. 408–410.
Ultrasonic Reference Standards Key to Reliable Ultrasonic Inspection, Harold Ellerington, ME, Vol. 28, No. 11,
November 1970, pp. 251–256.
Ultrasonic Refraction Angles for Inspection Throughout the Total Wall Thickness of Tubes and Pipes, Kenneth H.
Beck, ME, Vol. 51, No. 5, May 1993, pp. 607–612.
Ultrasonic Seam Tracking in the Vicinity of an Operating Welding Torch, Charles I. Umeagukwu, Russell Lambert,
Gregory Teese and Jacek Jarzynski, ME, Vol. 48, No. 4, April 1990, pp. 466–470.
Ultrasonic Signal Processing for Thickness Measurements and Detection of Near-Surface Defects, Luc Paradis,
Yves Serruys and Robert Saglio, ME, Vol. 44, No. 11, October 1986, pp. 1344–1349.
Ultrasonic Signal-Processing Concepts for Measuring the Thickness of Thin Layers, Joseph L. Rose and Paul A.
Meyer, ME, Vol. 32, No. 12, December 1974, pp. 249–255, 258.
Ultrasonic Sound Path Slide, Tom R. Moore and Andras Matolcsy, ME, Vol. 42, No. 8, July 1984, pp. 979–980.
Ultrasonic Spectral Analysis Methodology for Thickness Mapping of Electrochemical Hydrogen Meter Thimbles,
Govind K. Sharma, Anish Kumar, K.V. Rajkumar, Manjulata Sahu, T. Jayakumar, S. Nagraj, Kitheri Joseph and
Baldev Raj, ME, Vol. 4, April 2007, pp. 417-422.
Ultrasonic Spectroscopy of Composite Rings for Space Station Flywheel Rotors, Laura M. Cosgriff and George Y.
Baaklini, ME, Vol. 61, No. 9, September 2003, pp. 1013-1019.
Ultrasonic Spot Weld Testing and Profitability in the Automotive Industry, Robert A. Tuttle and Brian Frazzini, ME,
Vol. 64, No. 11, November 2006, pp. 1064-1066.
Ultrasonic Studies for Microstructural Characterization of A98090 Aluminum-Lithium Alloy, V. Rajendran, S.
Muthukumaran, T. Jayakumar, P. Palanichamy and Baldev Raj, ME, Vol. 63, No. 8, August 2005, pp. 837-842.
Ultrasonic Study of Adhesive Bond Quality at a Steel-to-Rubber Interface by Using Quadrature Phase Detection
Techniques, Alphonso C. Smith and Haesuk Yang, ME, Vol. 47, No. 12, December 1989, pp. 1396–1400.
Ultrasonic Technique for Global Anisotropic Property Measurement in Composite Materials, Ronald A. Kline and
Zhong-Tai Chen, ME, Vol. 46, No. 7, June 1988, pp. 986–992.
Ultrasonic Technique to Detect Corrosion in DC-9 Wing Box from Concept to Field Application, Igor N. Komsky,
January D. Achenbach, Glenn Andrew, Bob Grills, Jeff Register, Greg Linkert, Gerardo M. Hueto, Al Steinberg,
Mike Ashbaugh, David G. Moore and Hans Weber, ME, Vol. 53, No. 7, July 1995, pp. 848–852.
Ultrasonic Technique Using Secondsry Signals for Blind Thickness Characterization in Multilayer Structural Joints,
David R. Judd, John C. Aldrin and Bart Drennan, ME, Vol. 69, No. 5, May 2011, pp. 585–596.
Ultrasonic Techniques for Detection of High Temperature Hydrogen Attack, Anmol S. Birring, Mathieu
Riethmuller and Koji Kawano, ME, Vol. 63, No. 2, February 2005, pp. 110-115.
Ultrasonic Techniques for Detection of Weak Adhesion, Melody A. Drewry, Robert A. Smith, Albert P. Phang,
Dawai Yan, Paul Wilcox and Dennis P. Roach, ME, Vol. 67, No. 9, September 2009, pp. 1048-1058.
Ultrasonic Techniques for Measuring the Strength of Adhesive Bonds, George A. Alers, Paul L. Flynn and Michael
J. Buckley, ME, Vol. 35, No. 4, April 1977, pp. 77–84 Erratum, ME, Vol. 35, No. 6, June 1977, p. 62.
Ultrasonic Technology for Measuring Molten Aluminum Quality, Thomas L. Mansfield, ME, Vol. 41, No. 6, May
1983, pp. 743–747.