Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 114
Nondestructive Test for Measuring the State of Heat Treatment in Closure Welds, Caius V. Dodd and C.C. Lu, ME,
Vol. 30, No. 7, July 1972, pp. 142–148.
Nondestructive Test Methods for Specialty-Metals Production, C.S. Ferguson, ME, Vol. 33, No. 5, May 1975, pp.
22A, 24A, 26A, 28A.
Nondestructive Testing 1794: Cannon ‘Proofing’ Shown in Records, ME, Vol. 27, No. 9, September 1969, p. 50A.
Nondestructive Testing and Evaluation of Materials at the US Army Research Laboratory, Focus Paper, William H.
Green, Jennifer M. Sietins, and Christopher M. Kube, ME, Vol. 76, No. 7, July 2018, pp. 959–965.
Nondestructive Testing and Evaluation of Reinforced Concrete Bridge Decks: A Case Study, Cherif Amer-Yahia
and Todd Majidzadeh, ME, Vol. 76, No. 5, May 2018, pp. 643–653.
Nondestructive Testing and the Production Engineer, W.G. Cook, NDT, Vol. 15, No. 1, January-February 1957, pp.
54–59.
Nondestructive Testing at Penn State University, Joseph Rose, ME, Vol. 63, No. 8, August 2005, pp. 806-807.
Nondestructive Testing by Full-field Strains from Mechanoluminescent Sensors, Gunjin Yun, Mohammad Reza
Rahimi, Josh Weaver, and Ali Imani Azad, ME, Vol. 74, No. 6, June 2016, pp. 726–734.
Nondestructive Testing by High-Speed Thermography, Leif Bergstrom and Dietrich Baeu, ME, Vol. 27, No. 5, May
1969, pp. 25A–28A.
Nondestructive Testing Course for Engineering Technology Students, V. Genis, T. Midora, R. Bottari and A. Genis,
ME, Vol. 66, No. 4, April 2008, pp. 374-379.
Nondestructive Testing Doctoral Program at the College of William and Mary, Mark K. Hinders, ME, Vol. 62, No.
8, August 2004, pp. 833-834.
Nondestructive Testing Fights Terrorism, John P. Battema, ME, Vol. 44, No. 11, October 1986, pp. 1304, 1310,
1314, 1316.
Nondestructive Testing for Corrosion under Paint, J. Steve Cargill, Joseph A. Pecina, Steven M. Shepard, John D.
Weir, Reza Zoughi and Alan V. Bray, ME, Vol. 63, No. 2, February 2005, pp. 102-109.
Nondestructive Testing for Metal Parts Fabricated Using Powder-Based Additive Manufacturing, Lucas W.
Koester, Hossein Taheri, Timothy A. Bigelow, Peter C. Collins, and Leonard J. Bond, ME, Vol. 76, No. 4, April
2018, pp. 514–524.
Nondestructive Testing for Post-event Condition Assessement, Glenn Washer, ME, Vol. 64, No. 8, August 2006,
pp. 769-770.
Nondestructive Testing in a Unique Technical High School, Paul M. Caporali, NDT, Vol. 15, No. 1, January-February
1957, p. 25.
Nondestructive Testing in Additive Manufacturing (AM): An Introduction, Focus Letter, Ahmed Arabi Hassen, ME,
Vol. 76, No. 4, April 2018, p. 413.
Nondestructive Testing in Component Manufacturing, A.J. Heitner and C.D. Cherryholmes, NDT, Vol. 19, No. 2,
March-April 1961, pp. 113–115.
Nondestructive Testing in Construction of the Aircraft Carrier Saratoga, John L. Cahill, NDT, Vol. 14, No. 1, January-
February 1956, pp. 16–18.
Nondestructive Testing in Shipbuilding and Ship Repair, A.K. Hutton, NDT, Vol. 13, No. 1, January-February 1955,
pp. 27–31, 35.
Nondestructive Testing in the Automotive Industry, Robert B. Allured, NDT, Vol. 20, No. 3, May-June 1962, pp.
180–181.
Nondestructive Testing in the Netherlands from 1982 to 1985, G.M. van Dijk, ME, Vol. 44, No. 8, July 1986, pp.
970–982, 1012.
Nondestructive Testing in the View of Industry, Education and the Profession, Gerold H. Tenney, NDT, Vol. 11,
No. 6, July 1953, pp. 15–20.
Nondestructive Testing in Tropical Areas, Charles F. Meynart, NDT, Vol. 18, No. 1, January-February 1960, pp. 39–
40.
Nondestructive Testing Laboratory: 2001 ASNT Faculty Grant Award, Philip McNew, ME, Vol. 60, No. 8, August
2002, pp. 962-963.
Nondestructive Testing Leads the Way to Dense Powder Metal Parts, Salvatore A. LoPilato and A. Joseph DeLai,
ME, Vol. 29, No. 12, December 1971, pp. 275–280.
Nondestructive Testing Methods for Materials Evaluation, Donald J. Hagemaier, ME, Vol. 28, No. 6, June 1970,
pp. 25A–28A.
Nondestructive Testing Methods of Quartermaster Items and Aerial Delivery Evaluation, Roderick W. Browne,
NDT, Vol. 16, No. 5, Sep-Oct 1958, pp. 385–396.
Nondestructive Testing Needs in the Steel Industry, R. Creighton Booth and Russell N. Cressman, ME, Vol. 39, No.
12, November 1981, pp. 1130–1137.
Nondestructive Testing of 2017 Aluminum Copper Alloy Diffusion Welded Joints by an Ultrasonic Automatic
System, O. Debbouz and F. Navai, ME, Vol. 57, No. 12, December 1999, pp. 1263-1269.
Nondestructive Testing of a Plated Aluminum/Stainless Steel Joint, J.W. Dini, H.R. Johnson and G.N. Beeler, ME,
Vol. 32, No. 6, June 1974, pp. 124–132.
Nondestructive Testing of Advanced Composites, Donald J. Hagemaier and Robert H. Fassbender, ME, Vol. 37,
No. 7, June 1979, pp. 43–49.
Nondestructive Testing of Aircraft and Spacecraft Wiring, John E. White, Edward J. Tucholski and Robert E. Green,
Jr., ME, Vol. 61, No. 12, December 2003, pp. 1315-1320.
Nondestructive Testing of Aluminum-Copper Welds Using Acoustic Emission Techniques, Robert B. Steel and Carl
C. Popadick, ME, Vol. 34, No. 3, March 1976, pp. 64–69, 72.
Nondestructive Testing of Axial-Flow Rotors, S.G. Walker, ME, Vol. 23, No. 3, March 1965, pp. 140–143.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 115
Nondestructive Testing of Ceramic Matrix Composites Coupled with Finite Element Analyses, Ali Abdul-Aziz,
George Baaklini and Ramakrishna Bhatt, ME, Vol. 61, No. 3, March 2003, pp. 413-417.
Nondestructive Testing of Ceramics: A Selective NTIAC Bibliography, ME, Vol. 47, No. 5, May 1989, pp. 523–524,
538.
Nondestructive Testing of Composite Structures with the Sonic Resonator, Ron J. Botsco, ME, Vol. 24, No. 11,
November 1966, pp. 617–623.
Nondestructive Testing of Composites, Mehl Honor Lecture, Richard H. Bossi and Gary E. Georgeson, ME, Vol. 76,
No. 8, August 2018, pp. 1049–1060.
Nondestructive Testing of Dielectric Materials using an Active Reflecting Microwave Array, Amin Tayebi, Premjeet
Chahal, Lalita Udpa, and Satish S. Udpa, ME, Vol. 74, No. 12, December 2016, pp. 1684–1691.
Nondestructive Testing of Double-Wall, Flat-Bottom Liquid Natural Gas Tanks, Joseph E. Madden, ME, Vol. 50,
No. 4, April 1992, pp. 494–499.
Nondestructive Testing of Electrical Forgings, R.H. Leith and F.H. Oberlin, NDT, Vol. 14, No. 2, March-April 1956,
pp. 14–16.
Nondestructive Testing of Frescos: Thermal Modeling and Image Processing of Three Dimensional Heat Diffusion
Phenomena, Infrared Thermographic, V. Vavilov, S. Marinetti, E. Grinzato, P.G. Bison, S. Dal Toè and D.
Burleigh, ME, Vol. 60, No. 3, March 2002, pp. 452-460.
Nondestructive Testing of Fuel Elements for DIDO, James Thewlis and R.T.P. Derbyshire, NDT, Vol. 16, No. 2,
March-April 1958, pp. 154–157.
Nondestructive Testing of Graphite Fiber Composite Structures, Donald J. Hagemaier, H.J. McFaul and D. Moon,
ME, Vol. 29, No. 6, June 1971, pp. 133–140.
Nondestructive Testing of Hardware for Solid Rocket Motors, S.M. Joseph, NDT, Vol. 18, No. 5, Sep-Oct 1960, pp.
315–318.
Nondestructive Testing of Heat Exchanger Tubes in Balance of Plant using Bobbin Coil and Bobbin-Type Integrated
Hall Sensor Array, Tech Paper, Minhhuy Le, Sunbo Sim, Jungmin Kim, Jinyi Lee, ME, Vol. 76, No. 1, January
2018, pp. 79–89.
Nondestructive Testing of Hot Pressed Beryllium for Inertial Instrument Applications, Leo L. Soffa, NDT, Vol. 20,
No. 4, July-August 1962, pp. 242–244, 253.
Nondestructive Testing of Insensitive Electroexplosive Devices by Transient Techniques, L.A. Rosenthal and V.J.
Menichelli, ME, Vol. 30, No. 1, January 1972, pp. 13–19.
Nondestructive Testing of Large Solid Propellant Case-Bonded Rocket Motors, John H. Cusick, NDT, Vol. 18, No.
3, May-June 1960, pp. 195–199, 202.
Nondestructive Testing of Pipes in Hot Blooms by Gammascopic Inspection, A. Kohn, NDT, Vol. 21, No. 4, July-
August 1963, pp. 241–246.
Nondestructive Testing of Plastics with Microwaves, Ron J. Botsco, ME, Vol. 27, No. 6, June 1969, pp. 25A–32A.
Nondestructive Testing of Polymeric Composite Sandwich Panels Via the Thermographic Halo, Anton F. Thomas,
Liang-Wu Cai and James H. Williams, Jr., ME, Vol. 60, No. 11, November 2002, pp. 1339-1349.
Nondestructive Testing of Rocket Components Using Microwaves and Low-Frequency Ultrasonics, R.C. Stineberg
and R.H. Harrison, ME, Vol. 23, No. 1, January 1965, pp. 17–23.
Nondestructive Testing of Ski Lifts and Wire Rope, Renée S. Davis, ME, Vol. 49, No. 1, January 1991, pp. 64, 66–
69.
Nondestructive Testing of Small Metal Tubing, Harry W. Poole, ME, Vol. 28, No. 2, February 1970, pp. 40A, 42A,
44A–46A.
Nondestructive Testing of Small-Diameter, Stainless Steel Fuel Clad Tubing, Joseph Ryden, Jr., ME, Vol. 28, No. 3,
March 1970, pp. 67–71.
Nondestructive Testing of Space Systems during the Past Decade and One-Half, Paul Dick, ME, Vol. 32, No. 12,
December 1974, pp. 23A–33A.
Nondestructive Testing of Spot Welds using an Ultrasonic Resistance Spot Weld Analyzer, Alex Denisov and Joe
Udzbinac, ME, Vol. 71, No. 7, July 2013, pp. 814–821.
Nondestructive Testing of Steel and Steel Products, W.A. Black, NDT, Vol. 18, No. 3, May-June 1960, pp. 185–190.
Nondestructive Testing of Structural Lumber, William L. Galligan and Roy F. Pellerin, ME, Vol. 22, No. 4, April
1964, pp. 169–174.
Nondestructive Testing of the Point Beach Replacement Reactor Vessel Closure Head, William A. Jensen, ME, Vol.
64, No. 11, November 2006, pp. 1059-1063.
Nondestructive Testing of the Space Shuttle External Tank Foam Insulation Using Near Field and Focused
Millimeter Wave Techniques, S. Kharkovsky, F. Hepburn, J. Walker and R. Zoughi, ME, Vol. 63, No. 5, May 2005,
pp. 516-522.
Nondestructive Testing of Thermal Barrier Coated Turbine Blades using Microwave Techniques, Muhammad
Firdaus A.J.K., Robin Sloan, Christopher I. Duff, Marcin Wielgat, and James F. Knowles, ME, Vol. 74, No. 4, April
2016, pp. 543–551.
Nondestructive Testing of Thermal Barrier Coatings, Quantitative Infrared Thermographic, S. Marinetti, V.
Vavilov, P.G. Bison, E. Grinzato and F. Cernuschi, ME, Vol. 61, No. 6, June 2003, pp. 773-780.
Nondestructive Testing of Tubes by Encircling Sensors, Jean Perdijon, ME, Vol. 39, No. 13, December 1981, pp.
1222–1225.
Nondestructive Testing of Welding Defects in a Tubular-Type Transmission Tower using Magnetic Imaging with
Magnetic Sensor Array, Minhhuy Le, Juhyeon Park, Jungmin Kim, Gyejo Jung, and Jinyi Lee, ME, Vol. 76, No. 6,
June 2018, pp. 853–861.
Nondestructive Testing of Welds, Baldev Raj and C.V. Subramanian, ME, Vol. 57, No. 12, December 1999, pp.
1251-1254.