Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 58
Effect of Shielding and Exciter Coil Tilt on the Remote-Field Effect, E. von Rosen and David L. Atherton, ME, Vol.
51, No. 1, January 1993, pp. 66–71.
Effect of Stress and Heat Treatment on Magnetic Barkhausen Emission in Case Carburized Steels, Hyde, T.R., J.T.
Evans and B.A. Shaw, ME, Vol. 58, No. 8, August 2000, pp. 985-990.
Effect of Stress on Crack Detection by Radiography, Donald J. Hagemaier and Dennis L. Bowles, ME, Vol. 37, No.
9, August 1979, pp. 33–37, 44.
Effect of Structural Parameters on Coupling Interference of Arrayed Eddy Current Testing, Yang Li, Ling Ren, Saibo
She, Yechao Li, Jing Nie, and Jingbin Li, ME, Vol. 76, No. 10, October 2018, pp. 1293–1298.
Effect of Ultrasonic Transducer Beam Profile on Accuracy of Discontinuity Detection during Scanning, Kenneth H.
Beck, ME, Vol. 64, No. 2, February 2006, pp. 102-105.
Effect of Welded Pipe Support Brackets on Torsional Guided Wave Propagation, Shiuh-Kuang Yang, Ping-Hung
Lee and Jyin-Wen Cheng, ME, Vol. 67, No. 8, August 2009, pp. 935-944.
Effective Coal-Sampling Operations Keep Tabs on Consolidated Edison’s Kilowatt-Output Costs in New York,
William L. Doten, NDT, Vol. 15, No. 2, March-April 1957, pp. 92–93.
Effective Implementation of NDT into Aircraft Design, Fabrication and Service, Donald J. Hagemaier, ME, Vol. 46,
No. 7, June 1988, pp. 851–852, 854–855, 857 –858, 860, 862, 864, 866, 868.
Effective Presentation: In Print and On the Platform, W.A. Koehnline and Clyde R. Tipton, Jr., NDT, Vol. 12, No. 6,
Nov.-Dec, 1954, pp. 13–21.
Effectiveness of Rejuvenators on Aged Asphalt Concrete using Non-collinear Subsurface Wave Mixing, Megan E.
McGovern, Nicholas Farace, William G. Buttlar, and Henrique Reis, ME, Vol. 73, No. 10, October 2015, pp.
1365–1376.
Effects of Back Shield Albedo on Imagery with a Photodiode Array Using a 9 MV Bremsstrahlung Spectrum, Clint
M. Logan and Alexis E. Schach von Wittenau, ME, Vol. 59, No. 5, May 2001, pp. 617-620.
Effects of Bending Stresses and Tube Curvature on Remote Field Eddy Current Signals, J. Sutherland and David L.
Atherton, ME, Vol. 55, No. 1, January 1997, pp. 85–89.
Effects of Grain Size and Surface Roughness on Ultrasonic Testing of Aluminum Alloy Die Castings, S. Palanisamy,
C.R. Nagarajah and P. Iovenitti, ME, Vol. 63, No. 8, August 2005, pp. 832-836.
Effects of Remote-Field Exciter Coil Tilt and Eccentricity in a Steel Pipe, David L. Atherton, Thomas R. Schmidt,
Thomas Svendson and Ernest von Rosen, ME, Vol. 50, No. 1, January 1992, pp. 44–50.
Effects of Selected Electrode Shapes on Basic Ultrasonic Field Parameters, Joseph L. Rose, ME, Vol. 34, No. 5, May
1976, pp. 114–120.
Effects of Source and Specimen Dimensions on Resolution in Gamma Radiography, A.J. Stevens, NDT, Vol. 11, No.
8, November-December 1953, pp. 13–15.
Effects of Specimen Resonances on Acoustic-Ultrasonic Testing, James H. Williams, Jr., Elsbeth B. Kahn and
Samson S. Lee, ME, Vol. 41, No. 13, December 1983, pp. 1502–1510.
Effects of Surface Conditions on an Ultrasonic Inservice Inspection, Margaret S. Greenwood, Ali Minachi and R.
Bruce Thompson, ME, Vol. 58, No. 3, March 2000, pp. 439-448.
Effects of Temperature on Eddy Current Probe Response, Stanley W. Schwartz and William Lord, ME, Vol. 41, No.
12, November 1983, pp. 1395–1398.
Effects of Temperature on High Density Polyethylene Piping and Accuracy of Ultrasonic Thickness Gaging, Kevin
Harkreader, Back to Basics, ME, Vol. 59, No. 9, September 2001, pp. 1033-1036.
Effects of Test Speed on Ultrasonic Flaw Detection Reliability, John P. Bacon, NDT, Vol. 20, No. 6, November-
December 1962, pp. 380–382.
Elastic Modulus Determination as a Potential Tool for Predicting Embrittlement in a Ferritic Steel, Vaidehi
Ganesan, P. Palanichamy and Baldev Raj, ME, Vol. 62, No. 2, February 2004, pp. 137-142.
Elastic Wave Analysis in Nondestructive Testing, Joseph L. Rose and Richard W. Mortimer, ME, Vol. 31, No. 3,
March 1973, pp. 33–38, 47.
Election of ASNT Secretary/Treasurer, ME, Vol. 59, No. 10, October 2001, p. 1214.
Electric Field Leakage Nondestructive Testing Principle and its Simulation, Donglin Li, Yanhua Sun, Zhijian Ye, and
Yihua Kang, ME, Vol. 73, No. 11, November 2015, pp. 1438–1445.
Electric Potential and Electric Field Imaging with Applications, E.R. Generazio, ME, Vol. 73, No. 11, November
2015, pp. 1479–1489.
Electric Potential Diverts Eddy Current away from Discontinuities, Hiroshi Hoshikawa and Kiyoshi Koyama, ME,
Vol. 64, No. 8, August 2006, pp. 809-814.
Electric Power Applications of Liquid Penetrant Testing, Jeffrey F. Cook and Matthew J. Golis, ME, Vol. 58, No. 3,
March 2000, pp. 428-436.
Electric Power Applications of Magnetic Particle Testing, Anmol S. Birring, ME, Vol. 67, No. 5, May 2009, pp. 490-
498.
Electric Power Applications of Ultrasonic Testing, Anmol S. Birring, ME, Vol. 65, No. 6, June 2007, pp. 543-553.
Electrical or Radiological Power?, R. Ascani Orsini, T. Ghislanzoni and Arturo Gilardoni, ME, Vol. 27, No. 9,
September 1969, pp. 45A–46A.
Electrical Resistance Tomography–Based Sensing Skin with Internal Electrodes for Crack Detection in Large
Structures, Reza Rashetnia, Omar Khalaf Alla, Guillermo Gonzalez-Berrios, Aku Seppänen, and Mohammad
Pour-Ghaz, ME, Vol. 76, No. 10, October 2018, pp. 1405–1413.
Electro-Discharge Machined Reference Discontinuities, K.V. Cook and Robert W. McClung, ME, Vol. 25, No. 2,
February 1967, pp. 36–40.
Electro-Optic Aids to Quality Assessment and Structural Validation, D.J.V. Martin, ME, Vol. 46, No. 1, January
1988, pp. 52, 54–55, 58, 60, 62.
Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 59
Electrode Potential Testing, J.H. Bender, Jr., James W. Dutli, amd P.D. Edwards, NDT, Vol. 18, No. 2, March-April
1960, pp. 99–102.
Electromagnetic Detection of Acoustic Emission from a Martensitic Transformation, B.W. Maxfield and R.
Cochran, ME, Vol. 31, No. 2, February 1973, pp. 17–20.
Electromagnetic Inspection and Diagnostics of Steel Ropes: Technology, Effectiveness and Problems, Vasily V.
Sukhorukov, Dmitry A. Slesarev and Alexander N. Vortonsov, ME, Vol. 72, No. 8, August 2014, pp. 1019–1027.
Electromagnetic Measurement of Applied and Residual Surface Strain in Steel, Otto Henry Zinke, ME, Vol. 73, No.
11, November 2015, pp. 1490–1495.
Electromagnetic Measurement of Damping Capacity to Detect Damage in Adhesively Bonded Material, T.S.
Srivatsan, Raju Mantena, Ronald F. Gibson, T. Alan Place and T.S. Sudarshan, ME, Vol. 47, No. 5, May 1989, pp.
564–570.
Electromagnetic Modeling and Inverse Methods for Eddy Current Characterization of Carbon Fiber Composites,
Tech Paper, Harold A. Sabbagh, R. Kim Murphy, Elias H. Sabbagh, and Russell A. Wincheski, ME, Vol. 78, No. 1,
January 2020, pp. 73–81.
Electromagnetic Multiparameter Determination of Materials Characteristics, Klaus Grotz and Bernhard Lutz, ME,
Vol. 49, No. 1, January 1991, pp. 40–43.
Electromagnetic NDT Techniques -A 40 Year Retrospective or Retirement for Cause, William Lord, ME, Vol. 64,
No. 6, June 2006, pp. 547-550.
Electromagnetic Testing of Tubing: Standardization of Specifications and Test Methods, Part I, Richard
Hochschild, NDT, Vol. 16, No. 6, November-December 1958, pp. 495–499.
Electromagnetic Testing, ME, Vol. 61, No. 9, September 2003, pp. 1003-1005.
Electromagnetic Thickness Measurement on the AWACS Radome, W.E. Woodmansee and D.L. Mool, ME, Vol. 30,
No. 10, October 1972, pp. 205–210.
Electromagnetic Through-transmission and its Applications, Yuwu Yu, David Russell and Edwin Reid, ME, Vol. 70,
No. 11, November 2012, pp. 1313–1319.
Electromagnetic Ultrasonic Transducer for Generating and Detecting Longitudinal Waves (with a Small Amount
of Radially Polarized Transverse Wave), Katsuhiro Kawashima and Robert W. McClung, ME, Vol. 34, No. 4, April
1976, pp. 81–90.
Electromagnetic Wire Rope Inspection Resolution is Important, Herbert R. Weischedel, ME, Vol. 56, No. 11,
November 1998, pp. 1297–1301.
Electromagnetic/Acoustic Techniques for Inspection of Pipe Covered with Marine Growth, Hugh L. Whaley and
P.J. Latimer, ME, Vol. 50, No. 4, April 1992, pp. 531–534.
Electron Diffraction in Practice, Wayne T. Sproull, IRNDT, Vol. 5, No. 1, Summer 1946, pp. 40–44.
Electron Induction Accelerator, Donald W. Kerst, IR, Vol. 3, No. 1, Summer 1944, pp. 36–39.
Electron Tubes, Robert Taylor, IR, Vol. 1, No. 1, Summer 1942, pp. 12, 30.
Electronic Balloting Available to Members for 2007 Election, Special Notice, ME, Vol. 65, No. 3, March 2007, p.
303.
Electronic Balloting Available to Members for 2007 Election, Special Notice, ME, Vol. 65, No. 5, May 2007, p. 457.
Electronic Balloting Available to Members for 2008 Election, Special Notice, ME, Vol. 66, No. 6, June 2008, p. 568.
Electronic Fluoroscopy and High Speed Motion Picture Photography Used in the Evaluation of Sealed Assemblies,
John P. Battema, Jr. and James L. Minos, NDT, Vol. 18, No. 2, March-April 1960, pp. 103–106.
Electronic Fluoroscopy with Image Intensification, A.L. Alexander L. Gobus, NDT, Vol. 15, No. 2, March-April 1957,
pp. 100–102.
Electronics Division Meets Challenges of Efficiency and Savings in Radiography, ME, Vol. 40, No. 8, July 1982, pp.
820–822.
Electrostatic Application of Red Dye Penetrants and Dry Powder Developers to Massive Nuclear Components,
Mike A. Hall, ME, Vol. 37, No. 4, March 1979, pp. 56–58.
Electrothermal Nondestructive Testing of Metal Structures, L.D. McCullough and D.R. Green, ME, Vol. 30, No. 4,
April 1972, pp. 87–91.
Elements of a Feature-Based Ultrasonic Inspection System, Joseph L. Rose, ME, Vol. 42, No. 2, February 1984, pp.
210–218.
Eligibility Requirements for 2020 Sec/Treas, Society News, ME, Vol. 77, No. 12, December 2019, p. 1400.
Eliminating Scattered Radiation in Radiographic Inspection, Robert Taylor, IR, Vol. 1, No. 2, Fall 1942, pp. 26–27.
Elimination of Downtime in an Automated Assembly Operation by Nondestructive Qualification of Feed Parts,
Martha A. Glabicky-Fegan, ME, Vol. 45, No. 11, November 1987, pp. 1280, 1282–1284.
EMAT Designs for Special Applications, George A. Alers and Leigh R. Burns, Jr., ME, Vol. 45, No. 10, October 1987,
pp. 1184–1189, 1194.
EMATs for Thickness Gauging: Principle and Application, Back to Basics, Zhiyong Wang, ME, Vol. 77, No. 1, January
2019, pp. 34–43.
Embedded Optical Fiber Sensors in Civil Engineering Composite Structures, Xavier Chapeleau, Monssef Drissi-
Habti and Tomiyama Tomonori, ME, Vol. 68, No. 4, April 2010, pp. 408-415.
Emerging NDT Technologies and Challenges at the Beginning of the Millennium, Part 1, Yoseph Bar-Cohen, ME,
Vol. 58, No. 1, January 2000, pp. 17-30.
Emerging NDT Technologies and Challenges at the Beginning of the Millennium, Part 2, Yoseph Bar-Cohen, ME,
Vol. 58, No. 2, February 2000, pp. 141-150.
Emission Spectroscopy as a Tool in Nondestructive Testing, Drexel W. Baker, ME, Vol. 27, No. 8, August 1969, pp.
21A–23A.
Emissivity Independent Infrared Thermal Testing Method, Donald R. Green, ME, Vol. 23, No. 2, February 1965,
pp. 79–85.
Previous Page Next Page