Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 160
Ultrasonic Dimensional Tube Testing Techniques, John G. Rumbold, ME, Vol. 35, No. 2, February 1977, pp. 45–
50, 53.
Ultrasonic Discontinuity Detection in Thin-Walled Concrete, Michael Pedrick, Shivprakash Iyer, Bernhard
Tittmann and Sunil Sinha, ME, Vol. 65, No. 9, September 2007, pp. 923-928.
Ultrasonic Discontinuity Identification Technique for Testing Turbine Disk Blade Attachments, Yoshiaki
Nagashima, Hayato Mori, Masahiro Koike, Hiroaki Chiba, Masahiko Kuroki and Hideo Iida, ME, Vol. 64, No. 9,
September 2006, pp. 895-899.
Ultrasonic Equipment for High-Precision Thickness Measurement, Peter K. Bloch, NDT, Vol. 11, No. 5, May 1953,
pp. 21–23.
Ultrasonic Evaluation of Adhesive Coverage in Bonded Joints using a 2D Array Technique, R.Gr. Maev, S. Titov, A.
Bogachenkov, B. Ghaffari, K. Lazarz, D. Ondrous and L. Barsanti, ME, Vol. 71, No. 7, July 2013, pp. 875–882.
Ultrasonic Evaluation of Aluminum Master Cylinder Die Castings for Porosity, Cyrus Kotval, ME, Vol. 38, No. 11,
November 1980, pp. 23–27.
Ultrasonic Evaluation of Carbon-Carbon Composite Material, Robert A. Baker and John L. Irwin, ME, Vol. 29, No.
9, September 1971, pp. 209–215.
Ultrasonic Evaluation of Impact-Damaged Graphite Fiber Composite, James H. Williams, Jr. and Norman R.
Lampert, ME, Vol. 38, No. 12, December 1980, pp. 68–72.
Ultrasonic Evaluation of Mechanical Properties of Thick, Multilayered, Filament-Wound Composites, Harold E.
Kautz, ME, Vol. 45, No. 12, December 1987, pp. 1404–1412.
Ultrasonic Evaluation of Porosity in Out-of-Autoclave Carbon Fiber–Reinforced Polymer Composite Material,
Tech Paper, Dulip Samaratunga, Joseph V. Severino, and Shant Kenderian, ME, Vol. 79, No. 12, December 2021,
pp. 1169–1178.
Ultrasonic Evaluation of Silicon Carbide Whisker-Reinforced Ceramic Composites, William A. Simpson, Jr. and
Robert W. McClung, ME, Vol. 51, No. 3, March 1993, pp. 391–395.
Ultrasonic Evaluation of Solid-State Bonds, Peter B. Nagy and Laszlo Adler, ME, Vol. 50, No. 11, November 1992,
pp. 1328–1337.
Ultrasonic Evaluation of the Adhesion Degree in Layered Joints, Aleksander Pilarski, ME, Vol. 43, No. 6, May 1985,
pp. 765–770.
Ultrasonic Examination of Dissimilar Metal Welds in Nuclear Power Plants, Greg Selby, ME, Vol. 68, No. 7, July
2010, pp. 785-789.
Ultrasonic Examination of Thermite Welds in Rails Based on the AREMA Guidelines, Surendra Singh and Robin
Clark, ME, Vol. 62, No. 2, February 2004, pp. 143-148.
Ultrasonic Examination of Welds in Steel Tubular Transmission Structures, Frank Herring, Riley Looper and Jerome
Nelson, ME, Vol. 32, No. 4, April 1974, pp. 75–80.
Ultrasonic Examination of Welds: Comparison of ASME and AWS Procedures, W.C. McGaughey, ME, Vol. 30, No.
2, February 1972, pp. 44–48.
Ultrasonic Examinations of Weldments and the Establishment of Safe Acceptable Limits for Defects, Frank C.
Parker, NDT, Vol. 11, No. 3, January 1953, pp. 12–20.
Ultrasonic Flaw Evaluation in Rails with Assistance of Programmable Calculator, Alexander J. Rogovsky and Jerrell
M. Thomas, ME, Vol. 39, No. 13, December 1981, pp. 1237–1242.
Ultrasonic Flawplotting Equipment—A New Concept for Industrial Inspection, Ross W. Buchanan and Carlton H.
Hastings, NDT, Vol. 13, No. 5, Sep-Oct 1955, pp. 17–25.
Ultrasonic Frequency Analysis, H.L. Whaley and K.V. Cook, ME, Vol. 28, No. 3, March 1970, pp. 61–66.
Ultrasonic Girth-Weld Evaluation of Aluminum Test Mandrels, W.D. Brosey and T.W. Dews, ME, Vol. 45, No. 3,
March 1987, pp. 358–362.
Ultrasonic Guided Wave Inspection Concepts for Steam Generator Tubing, Joseph L. Rose, Krishna M. Rajana and
Frank T. Carr, ME, Vol. 52, No. 2, February 1994, pp. 307–311, 316.
Ultrasonic Guided Wave Mode and Frequency Selection for Multilayer Hybrid Laminates, Fei Yan, Kevin Xue Qi,
Joseph L. Rose and Hasso Weiland, ME, Vol. 68, No. 2, February 2010, pp. 169-175.
Ultrasonic Guided Wave Monitoring of Fatigue Damage Development in Bonded Joints, Ronald A. Kline and
Darush Hashemi, ME, Vol. 45, No. 9, September 1987, pp. 1076–1082.
Ultrasonic Guided Wave NDE for Piping, Joseph L. Rose, Dale Jiao and Jack Spanner, Jr., ME, Vol. 54, No. 11,
November 1996, pp. 1310–1313.
Ultrasonic Guided Wave Testing of Concrete Anchor Penetrations, Reyaz Sabet-Sharghi, Kianoush Samani, Erik
Burr, Travis Stelly, Randy Denardi, Jim McNew and Mark Susich, ME, Vol. 68, No. 10, October 2010, pp. 1085-
1090.
Ultrasonic Guided Waves for Anomaly Detection in Aircraft Components, Rose, Joseph L. and Luis E. Soley, ME,
Vol. 58, No. 9, September 2000, pp. 1080-1086.
Ultrasonic Guided Waves for Steel Bar Concrete Interface Testing, Won-Bae Na, Tribikram Kundu and Mohammad
R. Ehsani, ME, Vol. 60, No. 3, March 2002, pp. 437-444.
Ultrasonic Guided Waves: An Introduction to the Technical Focus Issue, Joseph L. Rose, ME, Vol. 61, No. 1, January
2003, p. 65.
Ultrasonic High-Temperature Materials Evaluation—A Solved Problem?, W. Morgner, K.-H. Schiebold and H.
Krause, ME, Vol. 45, No. 5, May 1987, pp. 569–571.
Ultrasonic Holography for Nondestructive Testing, J.L. Kreuzer, ME, Vol. 26, No. 10, October 1968, pp. 197–203.
Ultrasonic Identification of Weld Discontinuities, Ron Wappel, ME, Vol. 43, No. 9, August 1985, p. 1060–1061.
Ultrasonic Imaging in the Petroleum Processing Industry, John J. Hayden and Robert W. Pechacek, ME, Vol. 47,
No. 12, December 1989, pp. 1372, 1374, 1376.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 161
Ultrasonic Imaging of Textured Alumina, David B. Stang, Jonathan A. Salem and Edward R. Generazio, ME, Vol.
48, No. 12, December 1990, pp. 1478–1482.
Ultrasonic Imaging System for Composites and Ceramics, T. Nonaka, Y. Hayakawa, S. Takeda and H. Nishimori,
ME, Vol. 47, No. 5, May 1989, pp. 542, 544–546.
Ultrasonic Imaging through Highly Reverberant Thin Layers—Theoretical Considerations, Jafar Saniie, Eric S.
Furgason and Vernon L. Newhouse, ME, Vol. 40, No. 1, January 1982, pp. 115–121.
Ultrasonic Impulse-Induced-Resonance Utilizing Damping for Adhesive Disbond Detection, Emmanuel P.
Papadakis, ME, Vol. 36, No. 2, February 1978, pp. 37–40.
Ultrasonic In-Process Control of Spot Welding Quality, Edward E. Murray, ME, Vol. 25, No. 10, October 1967, pp.
226–230.
Ultrasonic Input-Output for Transmitting and Receiving Longitudinal Transducers Coupled to Same Face of
Isotropic Elastic Plate, James H. Williams, Jr., Hira Karagülle and Samson S. Lee, ME, Vol. 40, No. 6, May 1982,
pp. 655–662.
Ultrasonic Inspectability Improvements in Austenitic Stainless Steel Welds After Thermal-Mechanical Processing,
Layman A. Lott and R.K. Malik, ME, Vol. 41, No. 6, May 1983, pp. 738–742.
Ultrasonic Inspection at Elevated Temperature, Bernard Ostrofsky and C.B. Parrish, ME, Vol. 22, No. 2, February
1964, pp. 77–79.
Ultrasonic Inspection in the Oil-Refining and Related Industries, Dwight J. Evans, NDT, Vol. 15, No. 3, May-June
1957, pp. 156–160.
Ultrasonic Inspection Locates Discontinuities in Inertia Welded Rotating Bands, Timothy J. Peters, ME, Vol. 39,
No. 12, November 1981, pp. 1143–1146.
Ultrasonic Inspection Methods for Small-Bore Applications, K.V. Cook and R.A. Cunningham, Jr., ME, Vol. 36, No.
7, June 1978, pp. 49–54.
Ultrasonic Inspection of a Boron/Epoxy-Aluminum Composite Panel, Dennis Mool and Robert Stephenson, ME,
Vol. 29, No. 7, July 1971, pp. 159–164.
Ultrasonic Inspection of a Diffusion-Bonded Platelet Rocket Chamber Liner, Douglas M. Matson, John T. Lansaw,
Michael W. Suits, Angela W. Rose, Peg Danek, Thomas J. Nelligan and Philip P. Mooney, ME, Vol. 51, No. 5,
May 1993, pp. 545–546, 548–551.
Ultrasonic Inspection of Boiler Tubes, Bernard Ostrofsky and C.B. Parrish, ME, Vol. 26, No. 6, June 1968, pp. 106–
108, 119.
Ultrasonic Inspection of Brazed Pipe Joints, M.M. Nanda, N.A. Sinclair and J.F. Lovelace, ME, Vol. 22, No. 7, July
1964, pp. 315–320.
Ultrasonic Inspection of Carbon-Epoxy Composites, Donald J. Hagemaier and Robert H. Fassbender, ME, Vol. 43,
No. 5, April 1985, pp. 556–560.
Ultrasonic Inspection of Cast Explosive Billets for Air Voids, Gerald V. Blessing and Jeffrey M. Warren, ME, Vol.
35, No. 9, September 1977, pp. 69–75.
Ultrasonic Inspection of Cast HK-40 Tubes for Creep Fissures, Raymond R. Dalton, ME, Vol. 32, No. 12, December
1974, pp. 264–268.
Ultrasonic Inspection of Critical Components and Weldments for Pressure and Nuclear Vessels, Thomas F.
Drouillard, ME, Vol. 24, No. 6, June 1966, pp. 299–308.
Ultrasonic Inspection of End Cap Welds in Thin Walled Fuel Elements, January van den Andel, ME, Vol. 35, No. 2,
February 1977, pp. 56–60.
Ultrasonic Inspection of Gas Turbine Sand Castings, Robert H. Urich and William H. Sproat, ME, Vol. 36, No. 8,
July 1978, pp. 41–46.
Ultrasonic Inspection of Hardened Concrete, Cecil M. Shilstone and James M. Shilstone, NDT, Vol. 19, No. 1,
January-February 1961, pp. 39–44.
Ultrasonic Inspection of Haynes 25 Ball Bearings, A.E. Brown and H.L. Dunegan, ME, Vol. 23, No. 1, January 1965,
pp. 46–47.
Ultrasonic Inspection of Hot Steel Blooms to Detect Internal Pipe, Bernard E. Droney and Thomas J. Pfeiffer, ME,
Vol. 38, No. 6, June 1980, pp. 31–36, 41.
Ultrasonic Inspection of In-Service Shrunk-on Turbine Wheels, Frank Ammirato, ME, Vol. 39, No. 5, April 1981,
pp. 468–475.
Ultrasonic Inspection of Large Solid-Fuel Booster Nozzles, N.D. Passerell and A.C. Foster, ME, Vol. 25, No. 3, March
1967, pp. 53–57.
Ultrasonic Inspection of Line Pipe, Ewald H. Uecker, ME, Vol. 22, No. 4, April 1964, pp. 175–176.
Ultrasonic Inspection of Liquid Propellant Rocket Motor Components, R.E. Kleint and C.M. Johnson, NDT, Vol. 19,
No. 6, November-December 1961, pp. 418–421.
Ultrasonic Inspection of Pickle Line Welds, F.J. Barchfeld, S.A. Brosky and C.N. Lee, ME, Vol. 32, No. 6, June 1974,
pp. 117–121, 132.
Ultrasonic Inspection of Reinforced Plastics and Resin-Ceramic Composites, Carlton H. Hastings, S.A. LoPilato and
L.C. Lynnworth, NDT, Vol. 19, No. 5, Sep-Oct 1961, pp. 340–346.
Ultrasonic Inspection of Rotary Couplers in Unit-Train Coal Service, Donald E. Bray and Charles L. Salkowski, ME,
Vol. 50, No. 3, March 1992, pp. 373–374, 376, 378–383, 385.
Ultrasonic Inspection of Seamless Drill Casing and Linepipe, Russell F. Lumb, Henk Bosselaar and V.M. Baborovsky,
ME, Vol. 36, No. 10, September 1978, pp. 57–68, 71.
Ultrasonic Inspection of Spot Welds in Thin-Gage Steel, Tahir M. Mansour, ME, Vol. 46, No. 5, April 1988, pp. 650–
658 see also ME, Vol. 46, No. 11, October 1988, p. 1377.
Ultrasonic Inspection of Submarine Steel Weldments, N.A. Sinclair and M.M. Nanda, NDT, Vol. 19, No. 1, January-
February 1961, pp. 58–64.