Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 126
Proper Basic Thermal Imager Settings for Thermographic Inspections, Back to Basics, Sonny James, ME, Vol. 76,
No. 11, November 2018, pp. 1470–1477.
Proper Use of Light During Testing, H. Allen Sanders, ME, Vol. 69, No. 2, February 2011, pp. 164-167.
Properties of Some Radioactive Isotopes Useful in Radiography, Jerome Kohl, NDT, Vol. 11, No. 7, September
1953, pp. 33–37.
Property Evaluation of 2Cr13 Tempered Steel Based on the Magnetic Memory Technique, Long Feifei, Yang Yang,
Wang Jianzeng, Dai Guang, ME, Vol. 76, No. 6, June 2018, pp. 845–852.
Property Evaluation of Thermal Sprayed Metallic Coatings by Acoustic Emission Analysis, Asako Ishida, Yoshihiro
Mizutani, Mikio Takemoto and Kanji Ono, ME, Vol. 58, No. 3, March 2000, pp. 449-454.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 67, No. 8,
August 2009, pp. 882-885.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 70, No. 7,
July 2012, pp. 804–808.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 73, No. 6,
June 2015, pp. 662–668.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 75, No. 6,
June 2017, pp. 648–649.
Proposed ASNT Bylaws, Special Notice, ME, Vol. 63, No. 8, August 2005, p. 812.
Proposed NDT Personnel Qualification and Certification: Recommended Practice SNT-TC-1 (Tentative),
Supplement C—Ultrasonic Method, ME, Vol. 22, No. 7, July 1964, pp. 327–330.
Prospectus for NDT in the Saturn and Advanced Space Flight Programs, Lowell K. Zoller, ME, Vol. 24, No. 11,
November 1966, pp. 637–640.
Protection Against X-Rays and Gamma Rays: Genetic Injury, Paul S. Henshaw, IR, Vol. 4, No. 2, Fall 1945, pp. 37–
38.
Protection Against X-Rays and Gamma Rays: Human Factors, Robert B. Taft, IR, Vol. 4, No. 2, Fall 1945, pp. 38–
39.
Protection Against X-Rays and Gamma Rays: Materials and Methods of X-Ray Protection, George Singer, IR, Vol.
4, No. 2, Fall 1945, pp. 40–44.
Protection Against X-Rays and Gamma Rays: Radiation Injury, Robert S. Stone, IR, Vol. 4, No. 2, Fall 1945, pp. 36–
37.
Protection Against X-Rays and Gamma Rays: The Tolerance Dose or Tolerance Intensity, Edith H. Quimby, IR, Vol.
4, No. 2, Fall 1945, pp. 35–36.
Protection Against X-Rays and Gamma Rays: X-Ray Protection in Industrial Fluoroscopy, George C. Henny, IR, Vol.
4, No. 2, Fall 1945, pp. 39–40.
Protocol Assessment of a Field Reliability Experiment at the NDI Validation Center, Mike Ashbaugh and Floyd W.
Spencer, ME, Vol. 53, No. 7, July 1995, pp. 827–828.
Prototype of an In-Service Inspection System (ISIS) for Composites, Francis H. Chang, Jerry R. Bell, Jeffrey L. Brown
and R.W. Haile, ME, Vol. 43, No. 9, August 1985, pp. 1117–1123.
Proved Ultrasonic Methods for Strip and Plate Testing, H. Krautkrämer, ME, Vol. 22, No. 9, September 1964, pp.
404–408.
Provocative Techniques in Thermal NDT Imaging, G.J. Trezek and Sheldon Balk, ME, Vol. 34, No. 8, August 1976,
pp. 172–176.
Psychic’s Clues Track Train Defect, Sam Smith and Janet Cawley, ME, Vol. 38, No. 10, October 1980, p. 46.
Publications Manager McIntire Retires, Society News, ME, Vol. 63, No. 12, December 2005, p. 1186.
Pulsed Eddy Current Application to the Detection of Deep Cracks, Bruno Lebrun, Yves Jayet and Jean Claude
Baboux, ME, Vol. 53, No. 11, November 1995, pp. 1296–1300.
Pulsed Eddy Current Inspection of Thin-Walled Reactor Fuel Tubing, T.H. Busse and N.S. Beyer, ME, Vol. 28, No.
10, October 1970, pp. 228–236.
Pulsed Eddy Current Testing Apparatus for Use on Smooth and Ribbed Tubing, Allen Sather, ME, Vol. 35, No. 12,
December 1977, pp. 55–59.
Pulsed Eddy Current Testing of Friction Stir Welds, Catalin Mandache, Laurent Dubourg, Ali Merati and
Mohammad Jahazi, ME, Vol. 66, No. 4, April 2008, pp. 382-386.
Pulsed Eddy Current Testing, Casper Wassink and Paul Crouzen, ME, Vol. 76, No. 6, June 2018, pp. 700–705.
Pulsed Fast Neutron Analysis May Help Quench Terrorism, Rand H. Fishbein, ME, Vol. 55, No. 12, December 1997.
Pulsed Infrared Imaging: A New NDT Methodology for Aboveground Storage Tanks, Maurice J. Bales and C.C.
Bishop, ME, Vol. 52, No. 7, July 1994, pp. 814–815.
Pulsed Thermography Signal Processing Techniques Based on the 1D Solution of the Heat Equation Applied to
the Inspection of Laminated Composites, Fernando Lopez, Clemente Ibarra-Castanedo, Xavier Maldague and
Vicente de Paulo Nicolau, ME, Vol. 72, No. 1, January 2014, pp. 91–102.
Pulsed Ultrasonic Flaw Detection Model, Steven Serabian and John C. O’Callahan, ME, Vol. 43, No. 7, June 1985,
pp. 873–878.
Purpose of Pursuit of NDE 4.0, Back to Basics, Ripi Singh, ME, Vol. 78, No. 7, July 2020, pp. 784–793.
Pursuing Personal Excellence in NDT, Gordon E. Smith, ME, Vol. 44, No. 7, June 1986, pp. 836–838.
Q
Qualification and Certification of Nondestructive Testing Personnel, Earl R. Pade, ME, Vol. 28, No. 11, November
1970, pp. 23A–27A, 30A.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 127
Qualification of Nondestructive Testing Personnel in the Naval Nuclear Propulsion Program, Roy A. Nance, ME,
Vol. 49, No. 6, June 1991, pp. 823–824, 826.
Qualifications of an Industrial Radiographer, Eugene Morze, IR, Vol. 3, No. 4, Spring 1945, pp. 34–35.
Qualifying Underwater Inspectors in Norway, ME, Vol. 41, No. 5, April 1983, pp. 520, 522.
Qualitative Analysis of Brazed Sandwich, Frank J. Filippi, NDT, Vol. 17, No. 1, January-February 1959, pp. 39–45.
Qualitative and Quantitative Assessment of Steel Plates Using Pulsed Phase Thermography, C. Ibarra-Castanedo,
N.P. Avdelidis and X. Maldague, ME, Vol. 63, No. 11, November 2005, pp. 1128-1133.
Qualitative and Quantitative Determination of Densely Occurring Defects in Steel Ropes by Magnetic Testing
Method, E. Kalwa and K. Piekarski, ME, Vol. 46, No. 6, May 1988, pp. 767–770.
Quality and Economic Improvement in Non-Destructive Testing, H.J. McFaul and C.W. Webb, NDT, Vol. 19, No. 5,
Sep-Oct 1961, pp. 327–328.
Quality Assurance and the Public Interest, Martin Goland, ME, Vol. 33, No. 12, December 1975, pp. 16A–18A,
22A.
Quality Assurance of Aluminum Radiators by Infrared Thermography, Emmanuel P. Papadakis, Harvey L. Chesney
and Ronald G. Hurley, ME, Vol. 42, No. 3, March 1984, pp. 333–336.
Quality Characteristics of Chemical Equipment and Their Control through Nondestructive Testing, C.J. Veith, NDT,
Vol. 15, No. 1, January-February 1957, pp. 48–53, 59.
Quality Control Applications of Nondestructive Tests in the Airframe Industries Which Will Effectively Lower
Production Costs, B.W. Clawson, NDT, Vol. 11, No. 3, January 1953, pp. 25–27.
Quality Control of Composite Materials by Neural Network Analysis of Ultrasonic Power Spectra, Jon Juel
Thomsen and Kaspar Lund, ME, Vol. 49, No. 5, May 1991, pp. 594–600.
Quality Control of Heat-Treated Aluminum Plate by Electrical Conductivity Testing, Carlton E. Burley and James
E. Duarte, ME, Vol. 42, No. 12, November 1984, pp. 1487–1491.
Quality Control of Inspection Materials—What Does It Take Today?, J. Tom Schmidt, ME, Vol. 37, No. 3, February
1979, pp. 43–50.
Quality Control of Metallic Arc Welds by Radiographic Examination, John J. Chyle, IR, Vol. 3, No. 3, Winter 1944–
45, pp. 13–22.
Quality Control through Nondestructive Testing with Eddy Currents, Lee A. Cosgrove, NDT, Vol. 13, No. 5, Sep-
Oct 1955, pp. 13–15.
Quality Degradation Due to Shipment of Nonconforming Product under Statistical Process Control in the Absence
of Quarantining, Emmanuel P. Papadakis, ME, Vol. 51, No. 11, November 1993, pp. 1274–1278.
Quality Evaluation of Missile Structure Spot-Welded Joints, H. Heffan, J.W. Mauch, R.C. Smith and J.H. Cusick, ME,
Vol. 25, No. 1, January 1967, pp. 15–19.
Quality in the Fast Lane, Michael T. Chiotakis, ME, Vol. 53, No. 8, August 1995, p. 873.
Quality Indicators for Magnetic Particle Inspection, Donald J. Hagemaier, ME, Vol. 49, No. 3, March 1991, pp.
346–350 see also ME, Vol. 49, No. 11, November 1991, pp. 1364–1365.
Quantified Nondestructive Evaluation Capability: A Major Element in Engine Structural Integrity Programs, Paul
A. Domas, ME, Vol. 46, No. 5, April 1988, pp. 626–628, 630–631, 635.
Quantifying Magnetic Particle Inspection, Kermit Skeie and Donald J. Hagemaier, ME, Vol. 46, No. 6, May 1988,
pp. 779–785.
Quantifying the Need for NDE Education of Engineers, George C. Wheeler, ME, Vol. 42, No. 10, September 1984,
pp. 1210, 1212, 1214, 1216.
Quantile Probability of Detection: Distinguishing Between Uncertainty and Varability in Nondestructive Testing,
M. Li, F.W. Spencer, and W.Q. Meeker, ME, Vol. 73, No. 1, January 2015, pp. 89–95.
Quantitative Attenuation Technique for Materials Characterization, W.A. Simpson, Jr. and Robert W. McClung,
ME, Vol. 49, No. 11, November 1991, pp. 1409–1413.
Quantitative Characterization of Impact Damage in Composite Materials: A Comparison of Computerized
Vibrothermography and X-Ray Tomography, P. Potet, C. Bathias and B. Degrigny, ME, Vol. 46, No. 8, July 1988,
pp. 1050–1051, 1053–1054.
Quantitative Characterization of Stress Concentration of Low-carbon Steel by Metal Magnetic Memory Testing,
Sheng Bao, Meili Fu, Yibin Gu, Huangjie Lou, ME, Vol. 75, No. 3, March 2017, pp. 397–405.
Quantitative Comparison of Thermographic Data Sequences, Steven M. Shepard, Yulin Hou, James R. Lhota and
Tasdiq Ahmed, ME, Vol. 63, No. 7, July 2005, pp. 740-745.
Quantitative Eddy Current Testing Using Radial Basis Function Neural Networks, S. Thirunavukkarasu, B.P.C. Rao,
T. Jayakumar, P. Kalyanasundaram and Baldev Raj, ME, Vol. 62, No. 12, December 2004, pp. 1213-1217.
Quantitative Evaluation and Visualization of Cracking Process in Reinforced Concrete by a Moment Tensor
Analysis of Acoustic Emission, Shigenori Yuyama, Takahisa Okamoto, Mitsuhiro Shigeishi and Masayasu Ohtsu,
ME, Vol. 53, No. 6, June 1995, pp. 751–756.
Quantitative Evaluation of Factors Affecting the Sensitivity of Penetrant Systems, N.H. Hyam, ME, Vol. 30, No. 2,
February 1972, pp. 31–38.
Quantitative Evaluation of Radiographic Imaging Variables, Roy E. Wysnewski, ME, Vol. 41, No. 7, June 1983, pp.
826–830.
Quantitative Evaluation of the Effect of Mechanical Processing on the Effectiveness of Penetrant Inspection, J.F.
Cook, R.J. Lord and R.J. Roehrs, ME, Vol. 32, No. 7, July 1974, pp. 133–141.
Quantitative Flaw Characterization with Scanning Laser Acoustic Microscopy, Edward R. Generazio and Don J.
Roth, ME, Vol. 44, No. 7, June 1986, pp. 863–870.
Quantitative Geometric Characterization of Two-Dimensional Flaws Via Liquid Crystals Thermography, James H.
Williams, Jr., Betty Radley Felenchak and Raymond J. Nagem, ME, Vol. 41, No. 2, February 1983, pp. 190–201,
218.