Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 16
Aircraft Inspection Validation Experiments and the Use of NDI Validation Samples, Dennis Roach, Ken Harmon,
Craig Jones and Phil Walkington, ME, Vol. 53, No. 7, July 1995, pp. 803–807.
Aircraft Inspection with a Portable, Filmless X-Ray System Using Reverse Geometry, Richard Albert, William
Pember, Jeff Garrison and David Reyna, ME, Vol. 58, No. 5, May 2000, pp. 634-638.
Aircraft Non-Destructive Testing, William C. Hitt, NDT, Vol. 8, No. 1, Summer 1949, pp. 14–18.
Aircraft Overhaul Cleaning Requirements and Their Effect on the Fluorescent Penetrant Inspection Process,
Richard T. Fricker, ME, Vol. 32, No. 12, December 1974, pp. 262–263, 268.
Aircraft Structural Health Monitoring for Damage Detection: Reliability Aspects and Potential Solutions, Catalin
Mandache, ME, Vol. 74, No. 9, September 2016, pp. 1235–1244.
Airlines Officials Assess Present, Future of Plane Testing, ME, Vol. 25, No. 9, September 1967, pp. 22A–24A.
Alaskan Copper Works Mates X-Ray Environment to Job, ME, Vol. 42, No. 3, March 1984, pp. 276, 278.
Albatross Pilot Speaks at Seminar, ME, Vol. 39, No. 8, July 1981, p. 698.
ALCOA NDT Laboratory Trims Radiographic Testing Time, ME, Vol. 44, No. 5, April 1986, p. 540.
Alignment Fixture for Radiographic Inspection of Welds on Spherical Parts, Linwood O. Hester, ME, Vol. 41, No.
7, June 1983, p. 783.
Alloys Developed and Computer-Aided Tomography Used to Study Damage in Aging Aircraft, ME, Vol. 48, No. 2,
February 1990, pp. 293–294.
Alternating and Direct Current Measurement Techniques for Low Power Nanotech and Other Sensitive Devices,
Mary Anne Tupta, ME, Vol. 65, No. 2, February 2007, pp. 113-119.
Alternating Current Field Measurement Testing of Storage Tank Floor Welds, Martin C. Lugg, Christian Laenen
and German Salazar, ME, Vol. 65, No. 12, December 2007, pp. 1191-1196.
Alternating Current Field Measurement Testing, Back to Basics, Martin Lugg and Michael Smith, ME, Vol. 76, No.
1, January 2018, pp. 38–47.
Alternating Quantitative Methods for Screening Penetrant Testing Cleaning Solutions, Scott Grendahl, Back to
Basics, ME, Vol. 59, No. 1, January 2001, pp. 26-34.
Alternative Philosophy and Requirements for Certifying NDT Level III Personnel, Jack C. Spanner, Jr., ME, Vol. 43,
No. 11, October 1985, pp. 1392–1394, 1396–1397.
Amended and Restated Bylaws of the American Society for Nondestructive Testing, Inc., ME, Vol. 63, No. 8,
August 2005, pp. 813-817.
American National Draft Standards, Standards Update, ME, Vol. 68, No. 1, January 2010, p. 50.
American National Draft Standards, Standards Update, ME, Vol. 68, No. 4, April 2010, p. 425.
American School Counselor Association Annual Conference, Wrap-up, ME, Vol. 74, No. 9, September 2016, p.
1208.
AMMRC Team Visits Front Lines in South Vietnam to Test Gun Tubes, ME, Vol. 28, No. 1, January 1970, p. 21A.
Amplitude Distribution Analysis for b-Value Relationship to the Plasticity of 7075-T6 Aluminum, A.L. Phillips, V.G.
Godinez and Stephen W. Stafford, ME, Vol. 43, No. 4, March 1985, pp. 420–425.
Amplitude Distribution Analysis of Acoustic Emission Signals, Kanji Ono, ME, Vol. 34, No. 8, August 1976, pp. 177–
181, 184.
Amusement Park Safety Based on Nondestructive Testing, Julie A. Roehl, ME, Vol. 45, No. 6, June 1987, pp. 638–
639 see also ME, Vol. 45, No. 11, November 1987, p. 1217.
Amy Coelho, Staff News, ME, Vol. 79, No. 5, May 2021, p. 432.
An Accurate Laboratory Test System Using Commercial Equipment for Eddy Current Measurements, Caius V.
Dodd, L.M. Whitaker and W.E. Deeds, ME, Vol. 46, No. 12, November 1988, pp. 1569–1575.
An Acoustic Emission Method for the In Service Detection of Corrosion on Vertical Storage Tanks, Dai Guang, Li
Wei, Zhang Ying and Long Feifei, ME, Vol. 60, No. 8, August 2002, pp. 976-978.
An Aerospace Powerplant Executive Looks at Nondestructive Testing, W. Paul Eddy, ME, Vol. 23, No. 7, July 1965,
pp. 335–338.
An Analogical Approach to Ultrasonic Theory, O.T. Steffen, ME, Vol. 23, No. 2, February 1965, pp. 86–88.
An Analysis of Radiographic Techniques for Measuring Resin Content in Graphite Fiber Reinforced Epoxy Resin
Composites, B.G. Martin, ME, Vol. 35, No. 9, September 1977, pp. 65–68, 75.
An Analysis of the Dual-Element Angle Beam Transducer, Joseph L. Rose and Gurvinder P. Singh, ME, Vol. 38, No.
7, July 1980, pp. 38–43.
An Analysis of the Materials Evaluation Review-Referee Process, Emmanuel Papadakis, ME, Vol. 56, No. 2,
February 1998, pp. 180–181.
An Analysis of the Performance of X-Ray Television-Fluoroscopic Equipment in Weld Inspection, Ron Halmshaw,
ME, Vol. 45, No. 11, November 1987, pp. 1298–1302.
An Application of Underwater Radiography, Gene Lambert, ME, Vol. 26, No. 3, March 1968, pp. 27A–30A.
An Approach to Acoustic Emission Signal Analysis—Theory and Experiment, Nelson N. Hsu, John A. Simmons and
Stephen C. Hardy, ME, Vol. 35, No. 10, October 1977, pp. 100–106.
An Assessment for Coiled Tubing, Roderic K. Stanley, ME, Vol. 70, No. 6, June 2012, pp. 765–774.
An Assessment of Education in Nondestructive Testing—Present Status and the Future Needs: Part I, Steven
Serabian, ME, Vol. 27, No. 4, April 1969, pp. 14A, 16A, 18A, 20A, 30A–33A.
An Assessment of Education in Nondestructive Testing—Present Status and the Future Needs: Part II, Steven
Serabian, ME, Vol. 27, No. 5, May 1969, pp. 18A, 20A, 22A–24A, 29A–30A.
An Assessment of Remote Visual Testing System Capabilities for the Detection of Service Induced Cracking M.T.
Anderson, S.E. Cumblidge and S.R. Doctor, Back to Basics, ME, Vol. 63, No. 9, September 2005, pp. 883-891.
An Assessment of the Detecting Ability of the Angle Beam Interrogation Method, Steven Serabian, ME, Vol. 39,
No. 13, December 1981, pp. 1243–1249.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 17
An Automated System Using a Multivariate Waveform Classifier for Ultrasonic NDE of Heat-Fused PE Pipe Joints,
Michael F. Whalen, Helene S. Sproules, Charles B. Fulghum and James H. Gordon, ME, Vol. 42, No. 13,
December 1984, pp. 1638–1643.
An Automated Ultrasonic Inspection System with Interactive Graphics Displays, William J. Wolters, James A.
Seydel and Ron E. Novak, ME, Vol. 40, No. 1, January 1982, pp. 109–114.
An Automated Ultrasonic Test Bed, Jim Brase, R. McKinney, K. Blaedel, J. Oppenheimer, S. Wong and J. Simmons,
ME, Vol. 42, No. 13, December 1984, pp. 1619–1625.
An Automatic Magnetic Inspection Method Using Magnetoresistive Elements and Its Application, Toshio
Shiraiwa, Tatsuo Hiroshima and Syozo Morishima, ME, Vol. 31, No. 5, May 1973, pp. 90–96.
An Automatic Radiographic Developing Tank Replenisher, Charles Klee, IR, Vol. 1, No. 4, April 1943, p. 58.
An Eddy Current Inspection System Using Signal Correlation to Improve Signal-to-Noise Ratio, Tyler W. Judd, ME,
Vol. 42, No. 11, October 1984, pp. 1384–1388.
An Eddy Current Probe for Separating Defects from Resistivity Variations in Zirconium Alloy Tubes, J. Barrie
Hallett, Gary Van Drunen and Val S. Cecco, ME, Vol. 42, No. 10, September 1984, pp. 1276–1280.
An Eddy Current System for High-Speed Inspection of M-16 Cartridge Cases, Ronald A. Dilbeck and Thomas J.
Davis, ME, Vol. 39, No. 4, March 1981, pp. 396–400.
An Eddy Current Technique for Measuring the Tube-to-Tube Annulus in a Nuclear Test Reactor, J.C. Spanner, NDT,
Vol. 20, No. 6, November-December 1962, pp. 394–397, 400.
An Electronic Ear for Certifying Reliability, R.F. Spain, N.W. Schubring and M.J. Diamond, ME, Vol. 22, No. 3, March
1964, pp. 113–117, 128.
An Element-free Galerkin Model for Simulating Magneto-optic Imaging for Aerospace Applications, Fellowship
Award Paper, X. Liu, Y. Deng, Z. Zeng, L. Udpa and J.S. Knopp, ME, Vol. 64, No. 10, October 2006, pp. 1009-
1013.
An Embedded Piezoelectric Sensor for Monitoring Thermoset Hardening — Electric Impedance Measurements
and Correlation with Ultrasonic Method, Isabelle Perrissin-Fabert, Yves Jayet and Gérard Merle, ME, Vol. 52,
No. 11, November 1994, pp. 1292–1296.
An Evaluation of a Fast, Scintillator-Polaroid Film Camera for Neutron Image Detection, Harold Berger and I.R.
Kraska, NDT, Vol. 21, No. 3, May-June 1963, pp. 181–182, 184.
An Evaluation of an Ultrasonic Inspection System Employing Television Techniques, J.E. Jacobs, W.J. Collis and
Harold Berger, ME, Vol. 22, No. 5, May 1964, pp. 209–212.
An Evaluation of Deep Submergence Buoyancy Material Utilizing Penetrating Radiation Techniques, Bethel R.
Johnson, ME, Vol. 25, No. 8, August 1967, pp. 191–200.
An Evaluation of Human Reliability in Ultrasonic In-Service Inspection for Intergranular Stress-Corrosion Cracks
through Round-Robin Testing, T. Thomas Taylor, Jack C. Spanner, Patrick G. Heasler, Steven R. Doctor and J.D.
Deffenbaugh, ME, Vol. 47, No. 3, March 1989, pp. 338–344.
An Evaluation of Imaging Plate Characteristics that Determine Image Quality in Computed Radiography, A.S.S.
Silva, D.F. Oliveira, A.S. Machado, J.R. Nascimento and R.T. Lopes, ME, Vol. 72, No. 3, March 2014, pp. 392–
397.
An Evaluation of Iodine 125 for Industrial Radiography, Farno L. Green and Gene P. Graham, ME, Vol. 24, No. 5,
May 1966, pp. 249–252.
An Evaluation of Probe Coils with Ferrite Cores for Use in Electromagnetic Testing, Robert C. Grubinskas, ME, Vol.
24, No. 10, October 1966, pp. 557–563.
An Evaluation of the Application of Thulium-170 to Industrial Radiography, James W. Dutli and Dana E. Elliott,
NDT, Vol. 15, No. 2, March-April 1957, pp. 112–114.
An Evaluation of the Effectiveness of Penetrants, R.E. Kleint, NDT, Vol. 16, No. 5, Sep-Oct 1958, pp. 421–429.
An Evaluation of the No. 3000 Polaroid Film for Industrial Radiography, N.S. Beyer and K. Balaramamoorthy, ME,
Vol. 22, No. 2, February 1964, pp. 61–64.
An Experimental Analysis of Microcracking in Brick Masonry Using the Power Density Spectrum of Ultrasonic
Signals, Renato S. Olivito, ME, Vol. 63, No. 6, June 2005, pp. 667-670.
An Experimental Study of Discontinuities in Friction Stir Welded Joints through Nondestructive Testing, V.D.
Ragupathy, M.R. Bhat, M.V.N. Prasad, ME, Vol. 75, No. 3, March 2017, pp. 406–412.
An Experimental Study on Phased Array Ultrasonic Testing for Internal Inspection of Gas Storage Wells, Zheng
Yanchun, Miao Cunjian, Hong Lixiang, Guo Weican, ME, 80 (8), August 2022: 40–45,
https://doi.org/10.32548/2022.me-04278
An Experimental-numerical Investigation of the Face-to-face Sensor Characterization Technique, Brian Burks and
M.A. Hamstad, ME, Vol. 73, No. 3, March 2015, pp. 414–423.
An Extruding Die for Powdered X-Ray Diffraction Specimens, M. Grotenhuis, G.F. Durst and Arthur G. Barkow,
NDT, Vol. 7, No. 1, Summer 1948, pp. 15–18.
An Image Intensifier Tube with High Gain for 1 MEV Photons, Donald T. Green and Wilfrid F. Niklas, ME, Vol. 22,
No. 10, October 1964, pp. 465–470.
An Improved Boresonic System, Gilbert E. Ronca and William E. Glenn, ME, Vol. 39, No. 10, September 1981, pp.
943–947.
An Improved Eddy Current Tubing Test, H.L. Libby, ME, Vol. 23, No. 4, April 1965, pp. 181–187.
An Improved Electromagnetic Ultrasonic Testing Technique for Flaw Detection for Hot Steel, June Kubota, Soji
Sasaki, Ichiya Sato, Susumu Ito, Takashi Kadowaki, Hisao Yamaguchi, Kazuo Fujisawa and Riichi Murayama, ME,
Vol. 46, No. 4, March 1988, pp. 523–527.
An Indicating Photoelectric Densitometer Operating on a Neon Tube Discharge Rate Principle, Edward I. Salkovitz
and W. Roderic Bliss, IR, Vol. 1, No. 4, April 1943, pp. 54–57.