Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 18
An Industry-Cooperative Program to Develop an Automated Phased Array UT System, Eugene R. Reinhart,
Teodoro Leon-Salamanca, Ethan Ellenberg, Kristen Kaufman and Scott Wright, Vol. 67, No. 6, June 2009, pp.
603-610.
An Informative Radiograph from the Scattered Beam, N.S. Beyer, N.P. Lapinski and R.B. Perry, NDT, Vol. 19, No.
6, November-December 1961, pp. 408–409.
An Infrared Method of Rocket Motor Inspection, J.C. St. Clair, ME, Vol. 24, No. 8, August 1966, pp. 425–430.
An Infrared Microscope System for the Detection of Internal Flaws in Solids, W.A. Simpson, W.E. Deeds, C.C.
Cheng and Caius V. Dodd, ME, Vol. 28, No. 9, September 1970, pp. 205–211.
An Infrared Nondestructive Testing System for Rocket Motors, F.E. Alzofon, ME, Vol. 23, No. 11, November 1965,
pp. 537–539.
An Innovative Application of Computed Tomography: The Next Dimension of Safety for Critical Infrastructure, A.
Markovoz and R. Maziuk, ME, Vol. 74, No. 11, November 2016, pp. 1520–1528.
An Instrumental Method for Inspection of Rocket Motors, R.G. Ackland and J.W. Allison, NDT, Vol. 18, No. 4, July-
August 1960, pp. 250–254.
An Integrated Overview of “CRISP” Recyclable Materials and Systems, James R. Alburger, ME, Vol. 36, No. 6, May
1978, pp. 65–69.
An Integrating Photometer to Measure Porosity in Castings, Edward I. Salkovitz, IRNDT, Vol. 5, No. 3, Winter
1946–47, pp. 38–40.
An Interactive Graphics System Developed for NDT, Wayne E. Woodmansee, ME, Vol. 38, No. 3, March 1980, pp.
33–36.
An Introduction to Atmospheric Diving Suits, Steve Carnevale, ME, Vol. 41, No. 5, April 1983, pp. 529–530.
An Introduction to Long-Range Screening Using Guided Waves, Back to Basics, David Alleyne, Robin Jones, and
Thomas Vogt, ME, Vol. 75, No. 10, October 2017, pp. 1206–1213.
An Investigation of Extraneous White Spots on Zirconium-Alloy Radiographs, William D. Kiehle, Ralph E. Turner
and George M. Corney, NDT, Vol. 17, No. 6, November-December 1959, pp. 356–358, 362.
An Investigation of Probe-Type Eddy Current Inspection of Hot Steel Rounds, James F. Jackson, ME, Vol. 32, No.
8, August 1974, pp. 175–180.
An Investigation of Tank Bottom Leak Detection Using Acoustic Emission, Ming-Huei Yang and Chang-Pin Chou,
ME, Vol. 56, No. 7, July 1998, pp. 847–853.
An Investigation of the Acoustic Emission Generated during the Deformation of Mild Steel, Andreas N. Hadjicostis
and Steve H. Carpenter, ME, Vol. 38, No. 2, February 1980, pp. 19–23.
An Investigation of the Application of Iridium 192 Gamma Radiation to the Radiography of Light Metal Castings,
Robert V. Wolf and Karl P.W. Wolf, NDT, Vol. 12, No. 1, January-February 1954, pp. 26–29.
An Investigation of Xeroradiography of Uranium with High Energy Sources, R.E. Cofield, NDT, Vol. 12, No. 2,
March-April 1954, pp. 39–43.
An IR NDT Bond Inspection System for Rotor Blade Honeycomb Box Assemblies, A.J. Intrieri, ME, Vol. 28, No. 7,
July 1970, pp. 153–156, 161.
An On-Line Eddy Current System for the Quality Evaluation of Hot Rods, Marcel Cousin, ME, Vol. 43, No. 13,
December 1985, pp. 1649–1654.
An Opinion Paper: Hermit’s Meditations, Richard P. Krolicki, ME, Vol. 43, No. 11, October 1985, pp. 1408–1412.
An Opinion Paper: The Myth of Certification, Charles J. Hellier, ME, Vol. 38, No. 9, September 1980, pp. 37–40.
An Opinion Paper: Training and/or Certification, J.D. Lavender, ME, Vol. 39, No. 2, February 1981, pp. 112, 114.
An Optical Schlieren System for Ultrasound Imaging, C.E. Fitch, ME, Vol. 22, No. 3, March 1964, pp. 124–127.
An Overview of Nondestructive Evaluation and Characterization at Lawrence Livermore National Laboratory,
Jolyon A. Browne Harry E. Martz, Jr. Stephen G. Azevedo and Joseph W. Tringe, Focus Paper, ME, Vol. 76, No.
7, July 2018, pp. 931–939.
An Ultrasonic Case Study for Assessing the Effects of Natural Curing on the Blowing Process in Industrial Rubbers,
D. Datta, J. Kirchhoff and D. Mewes, ME, Vol. 61, No. 11, November 2003, pp. 1222-1225.
An Ultrasonic Crack Growth Monitor, W.G. Clark, Jr. and L.J. Ceschini, ME, Vol. 27, No. 8, August 1969, pp. 180–
184.
An Ultrasonic Device to Measure High-Strength Bolt Preloading, Howard J. McFaul, ME, Vol. 32, No. 11, November
1974, pp. 244–248.
An Ultrasonic Guided Wave Signal Processing and Pattern Recognition Tool for Studying the Discontinuity Axial
Length, Le Chen, Yuemin Wang, Haiquan Geng, Wenli Deng, and Wei Ye, ME, Vol. 75, No. 5, May 2017, pp.
607–613.
An Ultrasonic Guided Wave Technique for Damage Testing in a Ship Hull, Won-Joon Song, Joseph L. Rose and
Henry Whitesel, ME, Vol. 61, No. 1, January 2003, pp. 94-98.
An Ultrasonic Method for Evaluating Bonds in Large Metallic Bearings, B.F. Peters, ME, Vol. 22, No. 6, June 1964,
pp. 257–259.
An Ultrasonic Method for Measuring Crack Depth in Structural Weldments, Giulio DiGiacomo, J.R. Crisci and
Solomon Goldspiel, ME, Vol. 28, No. 9, September 1970, pp. 189–193, 204.
An Ultrasonic Nondestructive Test Procedure for the Early Detection of Fatigue Damage and the Prediction of
Remaining Life, James M. Carson and Joseph L. Rose, ME, Vol. 38, No. 4, April 1980, pp. 27–34.
An Ultrasonic Scanner and Recording System, W.N. Beck, NDT, Vol. 15, No. 1, January-February 1957, pp. 42–43,
46.
An Ultrasonic Technique for Evaluation of Heat-Exchanger Brazed Joints, K.V. Cook and Robert W. McClung, ME,
Vol. 24, No. 2, February 1966, pp. 97–100.
An Ultrasonic Technique for the Testing of Plates Embedded in Concrete with a Multi-element Probe, Hitoshi
Ishida, ME, Vol. 66, No. 12, December 2008, pp. 1228-1232.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 19
An Ultrasonic Time Domain Study for the Blowing Process of Industrial Rubbers, D. Datta, J. Kirchhoff and D.
Mewes, ME, Vol. 60, No. 12, December 2002, pp. 1444-1451.
An Ultrasonic Time of Flight Diffraction Technique for Characterization of Surface-Breaking Inclined Cracks, S.K.
Nath, K. Balasubramaniam, C. V. Krishnamurthy and B. H. Narayana, ME, Vol. 67, No. 2, February 2009, pp.
141-148.
An X-Ray Elemental Analyzer: Rugged, Rapid, Repeatable Real Time, J.B. Trice, A.J. DiColli, R.J. Locker and W.G.
Granat, ME, Vol. 33, No. 5, May 1975, pp. 107–112.
An X-Ray Image Intensifier of the Closed Circuit Television Type, Arthur F. Wegener, NDT, Vol. 16, No. 1, January-
February 1958, pp. 16, 18, 20–23.
An X-Ray Method for Studying Skin Thickness of Bronze Castings, Carleton G. Lutts, NDT, Vol. 6, No. 4, Spring
1948, pp. 13–14, 21.
Analyses of the Generating Mechanisms of Standard Magnetic Flux Leakage Testing Signals, Yanhua Sun, Shiwei
Liu, Donglin Li, Zhijian Ye, Min Gu, Changde Liu, Bo Feng, Ibrahim Temel, and Yihua Kang, ME, Vol. 74, No. 6,
June 2016, pp. 909–918.
Analysis of Acoustic Emission Testing Data using Neural Networks, Eric v.K. Hill and Michele D. Dorfman, ME, Vol.
71, No. 8, August 2013, pp. 937–946.
Analysis of Eddy Current Problems with a Time-Sharing Computer, Caius V. Dodd, W.E. Deeds, J.W. Luquire and
W.G. Spoeri, ME, Vol. 27, No. 7, July 1969, pp. 165–168.
Analysis of GPR and FWD Data Dependency Based on Road Test Field Surveys, Tech Paper, Vladislav Borecky,
Frantisek Haburaj, Salih Serkan Artagan, and Ladislav Routil, ME, Vol. 77, No. 2, February 2019, pp. 214–225.
Analysis of Isotope Radiometric Density Errors for Thin Sections of Materials, Arnold W. Schultz, ME, Vol. 30, No.
2, February 1972, pp. 39–43, 48.
Analysis of Laminated Composites with Portable Ultrasonic Imaging, F. Severin, A. Denisoc and R.Gr. Maev, ME,
Vol. 71, No. 7, July 2013, pp. 823–827.
Analysis of Magnetic Flux Leakage Testing for Longitudinal Discontinuities in Sucker Rods, Tech Paper, Ou Zhang,
Xueye Wei, Shuxin Yan, and Wenyan Yang, ME, Vol. 76, No. 8, August 2018, pp. 1099–1107.
Analysis of Radiographic Techniques, J.A. Holloway, D. Polansky and Edward L. Criscuolo, NDT, Vol. 18, No. 5, Sep-
Oct 1960, pp. 337–340.
Analysis of Stress Wave Emission (SWE) in Resistance Welding of Tantalum Capacitor, Min-Chung Jon, Hibbert
Duncan and Sotirios Vahaviolos, ME, Vol. 36, No. 11, October 1978, pp. 40–44.
Analysis of the Concrete Strength versus Ultrasonic Pulse Velocity Relationship, Sandor Popovics, Back to Basics,
ME, Vol. 59, No. 2, February 2001, pp. 123-130.
Analysis of the Delamination Detection Capabilities of Pulse Stimulated Thermographic Nondestructive Testing
Techniques, D.P. Almond and S.G. Pickering, ME, Vol. 72, No. 1, January 2014, pp. 83–90.
Analysis of the Heavy Element in Alloys and Ores by Beta Ray Backscattering, B.R. Balakrishnan and V.
Balasubramanian, ME, Vol. 25, No. 7, July 1967, pp. 173–176.
Analysis of the Remote-Field Eddy Current Effect in Nonmagnetic Tubes, Sean Sullivan and David L. Atherton, ME,
Vol. 47, No. 1, January 1989, pp. 80–86.
Analysis Techniques for the Inspection of Structures by Holographic Interferometry, O’Neill J. Burchett, ME, Vol.
30, No. 2, February 1972, pp. 25–30, 38.
Analysis Techniques for Volumetric Computed Tomography Inspection of Turbine Airfoils, Patrick Howard, Joseph
Portaz, and Peter Wassenaar, ME, Vol. 74, No. 7, July 2016, pp. 999–1004.
Analytical Approach to the Study of the Effect of Small Cavities on Fatigue Strength, R.E. Peterson, NDT, Vol. 18,
No. 3, May-June 1960, pp. 193–194, 202.
Analytical Methods for Simulation of Ultrasonic Testing of Complex Media on a Personal Computer, Spies, Martin,
ME, Vol. 58, No. 7, July 2000, pp. 897-901.
Analytical Ultrasonics for Evaluation of Composite Material Response, Edmund G. Henneke, II and John C. Duke,
Jr., ME, Vol. 43, No. 6, May 1985, pp. 740–745, 753.
Angle Beam Shear Wave Nondestructive Testing, Young-Fo Chang and Tzong-Ying Wu, ME, Vol. 63, No. 8, August
2005, pp. 827-831.
Angle of Refraction in the Ultrasonic Testing of Wrought Metals, William R. Randle, ME, Vol. 47, No. 12, December
1989, pp. 1346, 1348.
Angled Exposure Solves Radiographic Inspection Problem, ME, Vol. 38, No. 10, October 1980, pp. 20–21.
Annual Business Meeting Notice, ME, Vol. 59, No. 9, September 2001, p. 1024.
Annual Business Meeting Notice, ME, Vol. 60, No. 9, September 2002, p. 1033.
Annual Business Meeting Notice, ME, Vol. 61, No. 10, October 2003, p. 1116.
Annual Business Meeting Notice, Society News, ME, Vol. 62, No. 10, October 2004, p. 1033.
Annual Conference 2020: Virtual, but Still Together, Society News, ME, Vol. 78, No. 10, October 2020, pp. 1088–
1089.
Annualar Array Search Units and Their Potential Application in Conventional Ultrasonic Testing Systems, Jerry T.
McElroy and Kenneth F. Briers, ME, Vol. 37, No. 11, October 1979, pp. 41–46.
Anomalies in the Ultrasonic Inspection of Steel, W.C. Harmon, NDT, Vol. 21, No. 3, May-June 1963, pp. 185–188.
Anomaly Throughwall Depth Measurement Potential with Shear Horizontal Guided Waves, J.L. Rose and X. Zhao,
ME, Vol. 59, No. 10, October 2001, pp. 1234-1238.
Apparatus for Determining Dynamic Modulus of Elasticity and Internal Damping Capacity, D.W. James, ME, Vol.
27, No. 5, May 1969, pp. 102–106.
Application of 3D LIDAR Scan of a Bridge Under Static Load Testing, Wanqiu Liu, Shen-en Chen, David Boyajian
and Edd Hauser, ME, Vol. 68, No. 12, December 2010, pp. 1359-1367.