Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 50
Developing NDT Technologies for Highway Bridges, Glenn A. Washer, ME, Vol. 57, No. 11, November 1999, 1151-
1161.
Developing Raman Spectroscopy for the Nondestructive Testing of Carbon Fiber Composites, Glenn Washer and
Frank Blum, Jr., ME, Vol. 69, No. 10, October 2011, pp. 1219–1226.
Developing, Optimizing and Validating Automated Ultrasonic Procedures for Testing Heavy Walled
Hydroprocessing Reactors, M.G. Lozev and R.L. Spencer, ME, Vol. 63, No. 9, September 2005, pp. 926-932.
Development and Application of Ultrasonic Dry-Contact and Air-Contact C-Scan Systems for Nondestructive
Evaluation of Aerospace Composites, Alexander J. Rogovsky, ME, Vol. 49, No. 12, December 1991, pp. 1491–
1497.
Development and Applications of Fast-Sensitive Magnetic Rubber Inspection Formulations, Henry J. Weltman,
W.T. Kaarlela, Jack D. Reynolds and John E. Halkias, ME, Vol. 42, No. 7, June 1984, pp. 917–921.
Development of a Digital Radiographic Flat Panel for NDT and Homeland Security, Adar Yiron, ME, Vol. 63, No.
12, December 2005, pp. 1177-1180.
Development of a Divided-Ring Array for Three-Dimensional Beam Steering in Ultrasonic Nondestructive Testing:
Theoretical and Experimental Results of a Prototype, Hans-Peter Schwarz, ME, Vol. 45, No. 8, August 1987, pp.
951–957.
Development of a Large Automatic Ultrasonic Plate Testing Installation with Online Computer Data Output,
Guenter Kuenne, ME, Vol. 33, No. 4, April 1975, pp. 73–80.
Development of a Manually Operated Multiple-Transducer Ultrasonic Instrument for Inspecting Plates, E.M.
Nusbickel and R.N. Cressman, ME, Vol. 28, No. 1, January 1970, pp. 1–7.
Development of a Method for an Accurate Assessment of the Radiographic Image Quality Using Standardized
Step/Hole Type IQIs, Jacques Chéret, ME, Vol. 35, No. 5, May 1977, pp. 47–53, 58.
Development of a Monochromatic Radiographic Method for Locating Small Defects in Aluminum Alloy Castings,
George L. Clark and R.W. Eyler, IR, Vol. 3, No. 1, Summer 1944, pp. 13–18.
Development of a Nondestructive Testing Methods Course for Engineers at the University of Kansas, Guillermo
Ramirez, ME, Vol. 59, No. 4, April 2001, pp. 512-514.
Development of a Portable Device for Thermoelectric Power Measurement: Application to the Testing of Duplex
Stainless Steel Componenets, Jean-François Coste, Jean-Marie Leborgne, Jean-Paul Massoud, Odile Grisot,
René Borrelly and Jean-Louis Bouvier-Volaille, ME, Vol. 59, No. 3, March 2001, pp. 401-405.
Development of a Portable, High-Energy Radiographic Source, Eugene R. Reinhart, Samuel A. Wenk, R.G.
Schonberg and G.L. Mixon, ME, Vol. 37, No. 1, January 1979, pp. 37–42, 47.
Development of a Radiographic Technique for Mated Electrical Connectors, Roderick W. Browne and W.B.
Robertson, ME, Vol. 25, No. 10, October 1967, pp. 221–225.
Development of an Acoustic Emission Model for Adhesive Wear, Tech Paper, Cevat Teymuri-Sindi, ME, Vol. 77,
No. 4, April 2019, pp. 529–534.
Development of an Automated Ultrasonic Inspection System for Verifying Waste Container Integrity, Jeffrey F.
Cook, Donna A. Aldrich, Burdell C. Anderson and V. Stanley Scown, ME, Vol. 42, No. 13, December 1984, pp.
1626–1630.
Development of an Automatic Ultrasonic Texture Instrument and Its Transition from Laboratory to Market: A
Model for Technology Transfer, Emmanuel P. Papadakis, R. Bruce Thompson, Samuel J. Wormley, Delwyn D.
Bluhm, Harold D. Skank, George A. Alers, Kaveh Forouraghi, James R. Griffiths, Robert M. Parker, William D.
Thomas and David H. Birlingmair, ME, Vol. 51, No. 1, January 1993, pp. 77–85.
Development of an Improved Sonic Resonance Inspection System for Nodularity in Crankshafts, Bela V. Kovacs,
Jack Stone and Emmanuel P. Papadakis, ME, Vol. 42, No. 7, June 1984, pp. 906–916.
Development of an In-Pipe Inspection Vehicle, Shigeru Fujiwara, ME, Vol. 53, No. 5, May 1995, pp. 566–569.
Development of an Innovative Inspection Tool for Superheater Tubes in Fossil Fuel Power Plants, Tech Paper,
Caique Lara, Julie Villamil, Anthony Abrahao, Aparna Aravelli, Guilherme Daldegan, Sharif Sarker, Daniel
Martinez, and Dwayne McDaniel, ME, Vol. 79, No. 7, July 2021, pp. 728–738.
Development of an Inspection Measurement Lab at California State University, Long Beach, Parviz Yavari, ME,
Vol. 66, No. 9, September 2008, pp. 917-920.
Development of an Operational Helium Leak Detection System for the National Space Transportation System,
Vincent J. Bilardo, Jr. and William Van Dusen, Jr., ME, Vol. 47, No. 11, November 1989, pp. 1301–1307.
Development of an Ultrasonic Inspection Technique for Sizing of Cracks in Complex Geometry Plant Components,
S.K. Nath, ME, Vol. 74, No. 5, May 2016, pp. 651–657.
Development of an Ultrasonic Method for Determination of Grain Size in Cast Steel, G. DiGiacomo, G. Ohlstein
and W.J. Jones, ME, Vol. 28, No. 12, December 1970, pp. 271–276.
Development of an Ultrasonic Phased Array for Nondestructive Testing of Pipes: Theory and Practice, Qingshan
Yuan, Yanming Guo, Zhigang Sun and Clive Lam, ME, Vol. 69, No. 4, April 2011, pp. 501–506 errata Vol. 69, No.
5, May 2011, p. 569.
Development of an Ultrasonic Testing Technique for the NDT of Breeder Reactor End Cap Welds, D. Mukherjee,
M.M. Saxena, D.B. Sathe, J.P. Panakkal and H.S. Kamath, ME, Vol. 64, No. 11, November 2006, pp. 1097-1101.
Development of an Undergraduate Course on NDT, Piervincenzo Rizzo, ME, Vol. 66, No. 9, September 2008, pp.
914-915.
Development of an Undergraduate Course on Nondestructive Testing, Francesco Lanza di Scalea and Vistasp M.
Karbhari, ME, Vol. 62, No. 8, August 2004, p. 829.
Development of ASTM Standard Reference Blocks for Ultrasonic Inspection, F.C. Panian and Howard E. Van
Valkenburg, NDT, Vol. 19, No. 1, January-February 1961, pp. 45–57.
Development of High-Sensitivity and Low-Noise Integrated Acoustic Emission Sensor, Mitsuharu Shiwa, Hidehiro
Inaba, Steve H. Carpenter and Teruo Kishi, ME, Vol. 50, No. 7, July 1992, pp. 868–874.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 51
Development of High-Voltage Radiography and Dual Microdensitometric Techniques for Evaluating Stressed Rock
Specimens, B.E. Foster, S.D. Snyder, Robert W. McClung and W.J. Godzinsky, ME, Vol. 31, No. 11, November
1973, pp. 229–236, 240.
Development of Nondestructive Techniques for Characterization of Residual Stresses in Advanced Materials, A.N.
Lasseigne and D.L. Olson, Fellowship Award Paper, ME, Vol. 66, No. 10, October 2008, pp. 1077-1083.
Development of Nondestructive Tests for the EGCR Fuel Assembly, Robert W. McClung, NDT, Vol. 19, No. 5, Sep-
Oct 1961, pp. 352–358.
Development of Process Control Procedure for Ultrahigh-Sensitivity Fluorescent Penetrant Inspection Systems,
Jay A. Wein and Terry C. Kessler, ME, Vol. 48, No. 8, August 1990, pp. 991–994.
Development of Single-channel and Phased Array Electromagnetic Acoustic Transducer for Austenitic Weld
Testing, Huidong Gao and Borja Lopez, ME, Vol. 68, No. 7, July 2010, pp. 821-827.
Development of Specialized X-Ray Techniques and Equipment for Inspection of Ocean Cable Splices, J.W. Nalencz
and M.E. Campbell, ME, Vol. 22, No. 5, May 1964, pp. 217–218, 224.
Development of the ASNT Central Certification Program, George C. Moran, ME, Vol. 54, No. 7, July 1996, pp. 796–
797.
Development of the DC-10 Nondestructive Testing Manual, Donald J. Hagemaier and H.J. McFaul, ME, Vol. 29,
No. 11, November 1971, pp. 249–255.
Development of the New Post-Emulsion Fluorescent Penetrant Inspection, Fred W. Rohde, NDT, Vol. 13, No. 3,
May-June 1955, pp. 27–33.
Development of Ultrasonic Examination Methods for Austenitic Stainless Steel Weld Inspection, Stephen J. Mech
and Thomas E. Michaels, ME, Vol. 35, No. 7, July 1977, pp. 81–86.
Development of Ultrasonic Inspection for Adhesive Bonds in Aging Aircraft, David K. Hsu and Thadd C. Patton,
ME, Vol. 51, No. 12, December 1993, pp. 1390–1397.
Development of Ultrasonic Inspection Techniques for Tapered Tubing, Robert W. McClung and K.V. Cook, ME,
Vol. 24, No. 10, October 1966, pp. 573–576.
Development of Ultrasonic Testing Techniques for Saturn Honeycomb Heat Shields, J.F. Moore, ME, Vol. 25, No.
2, February 1967, pp. 25–32.
Developments in Discontinuity Sizing Using Automated Ultrasonic Testing — An Experimental Study, L.L. Morgan,
M.G. Lozev, D. Hodgkinson and R.L. Spencer, ME, Vol. 66, No. 8, August 2008, pp. 851-857.
Developments in Eddy Current Nondestructive Testing, Ramasamy Palanisamy, ME, Vol. 49, No. 9, September
1991, pp. 1158–1159, 1161.
Developments in Gas Pipeline Inspection Technology, L. Upda, S. Mandayam, S. Upda, Y. Sun and William Lord,
ME, Vol. 54, No. 4, April 1996, pp. 467–468, 470–472.
Developments in Probability of Detection Modeling and Simulation Studies, Jeremy S. Knopp, Frank Ciarallo, and
Ramana V. Grandhi, ME, Vol. 73, No. 4, April 1996, pp. 467–468, 470–472.
Developments in the Dual-Probe Technique for Immersion Angle-Beam Ultrasonic Testing of Steel Tube and Pipe,
Kunio Iiyama and Takeski Yagi, ME, Vol. 46, No. 1, January 2015, pp. 55–61.
Device and Method of Quantitative Analysis, Stanley Brosky, IRNDT, Vol. 5, No. 1, Summer 1946, pp. 36–39.
Device Keeps Track of Railroad Wheels, ME, Vol. 43, No. 9, August 1985, p. 1066.
Devices for the Movable Local Multidirectional Magnetization of Metal Structures in Magnetic Particle Testing,
V.A. Troitskiy, ME, Vol. 73, No. 6, June 2015, pp. 674–683.
Dewey Named Managing Director, ME, Vol. 42, No. 1, January 1984, p. 13.
Diagnosis of Thermal Aging of Cast Duplex Stainless Steel by Electromagnetic Ultrasonic Method, Yasuo Kurozumi,
Yusuke Ohtsuka and Masahiro Nishikawa, ME, Vol. 60, No. 1, January 2002, pp. 71-77.
Dichotomy of Fluorescent Penetrant Inspection Reliability Challenges versus Opportunities for Improved
Performance and Capability, Tech Paper, Surendra Singh, Robert Hogan, and Alonso Peralta, ME, Vol. 76, No.
1, January 2018, pp. 90–101.
Dick Chaney: NDT for Standard Oil (Indiana), Beth Ann Kramer, ME, Vol. 39, No. 7, June 1981, pp. 638–641.
Dielectric Measurements for Cure Monitoring, Frederick I. Mopsik, Shu-Sing Chang and Donald L. Hunston, ME,
Vol. 47, No. 4, April 1989, pp. 448–453, 465.
Dielectrometry Sensors for Nondestructive Testing of Glass-fiber Polymer-matrix Composites, Robert T. Sheldon
and Nicola Bowler, ME, Vol. 72, No. 11, November 2014, pp. 1421–1428.
Differences between American and European Nondestructive Testing Procedures, Dietmar Henning, ME, Vol. 48,
No. 3, March 1990, pp. 403–406.
Differences in Ultrasonic Testing of Various Materials, J.B. Morgan, NDT, Vol. 21, No. 2, March-April 1963, pp.
121–126.
Differential Imaging in Electrical Impedance Computerized Tomography, Jie-Ren Shie, C. James Li and Jen-Tai Lin,
ME, Vol. 59, No. 3, March 2001, pp. 406-412.
Difficulties of Radiographic Evaluation of Inconel Welds Joining Dissimilar Metals, Ronald W. Kruzic, ME, Vol. 44,
No. 11, October 1986, pp. 1336–1339.
Diffraction Model for Ultrasonic Frequency Analysis and Flaw Characterization, Laszlo Adler and D. Kent Lewis,
ME, Vol. 35, No. 1, January 1977, pp. 51–56.
Diffractographic Applications to Nondestructive Testing, T.R. Pryor, ME, Vol. 32, No. 7, July 1974, pp. 142–146,
152.
Digital Computer Algorithms to Calculate Ultrasonic Wave Speed, Gary G. Leisk and Anil Saigal, ME, Vol. 54, No.
7, July 1996, pp. 840–843.
Digital Detector Array for Offshore Pipeline Radiographic Testing, Edson Vasques Moreira, Marcelo dos Santos
Pereira, Ricardo Tadeu Lopes, and Robson P. Manao, ME, Vol. 73, No. 7, July 2015, pp. 930–935.