Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 156
Thermographic Testing on Buildings Using a Simplified Heat Transfer Model, Nicola Ludwig, ME, Vol. 61, No. 5,
May 2003, pp. 599-603.
Thermography Checks Laser Quality, ME, Vol. 50, No. 6, June 1992, pp. 764–765.
Thermography in the Electronic Communications Industry, McClendon, Robert M., ME, Vol. 56, No. 9, September
1998, pp. 1072–1075.
Thermography of Foam-Core Sandwich Structures, Mats Vikström, ME, Vol. 47, No. 7, July 1989, pp. 802, 804.
Thermography: More Than a Pretty Picture, Steven Shepard and James Lhota, ME, Vol. 72, No. 1, January 2014,
pp. 32–41.
Thickness Gages, ME, Vol. 59, No. 4, April 2001, pp. 520-522.
Thickness Gaging by Gamma Ray Attenuation, J.D. Clayton, ME, Vol. 31, No. 2, February 1973, pp. 27–32.
Thickness Independent Ultrasonic Imaging Applied to Abrasive Cut Off Wheels, Don J. Roth and Donald A. Farmer,
ME, Vol. 58, No. 4, April 2000, pp. 551-557.
Thickness Measurements in Alloys Used for Advanced Gas Turbine Engine Airfoils, C.R. Honeycutt and F.J. Sattler,
ME, Vol. 29, No. 3, March 1971, pp. 51–58, 63.
Thickness Measurements Using Eddy Current Techniques, Caius V. Dodd and W.A. Simpson, Jr., ME, Vol. 31, No.
5, May 1973, pp. 73–79, 84.
Thickness Testing Using a New Relationship between Film Density and Penetrated Thickness in Radiography, Sung
Sik Lee and Young H. Kim, ME, Vol. 62, No. 12, December 2004, pp. 1218-1221.
Thickness-Compensation Technique for Ultrasonic Evaluation of Composite Materials, Manohar Bashyam, ME,
Vol. 48, No. 11, November 1990, pp. 1360–1364.
Thickness, Alloy Content and Cracks in Aluminum Measured by an Alternating Current Magnetic Bridge, Otto H.
Zinke, William F. Schmidt and J. Timothy Lovett, ME, Vol. 59, No. 4, April 2001, pp. 537-542.
Thinking About Transitioning into the ACCP?, Michael L. Turnbow, ME, Vol. 61, No. 9, September 2003, p. 1011.
Third Progress Report on the Nondestructive Testing Handbook, Robert C. McMaster, NDT, Vol. 18, No. 1,
January-February 1960, pp. 41–52.
Third US-Japan Symposium on Advancing Applications and Capabilities in NDE, Wrap-up, ME, Vol. 63, No. 9,
September 2005, p. 919.
Third-Party Program Audits Quality Systems, ME, Vol. 49, No. 12, December 1991, p. 1551.
Thirty Years in Pipe Inspection, Roderic K. Stanley, Mehl Honor Lecture, ME, Vol. 66, No. 1, January 2008, pp. 26-
32.
Thirty-degree Contact Circumferential Shear Wave Calibration on an Outside/Inside Diameter Ratio of Two,
Richard L. Riley, ME, Vol. 69, No. 12, December 2011, pp. 1363-1369.
Three Decades of NDT Reliability Assessment and Demonstration, Ripudaman Singh, ME, Vol. 59, No. 7, July 2001,
pp. 856-860.
Three Dimensional Surface Depression Profiling Using Focused Air Coupled Ultrasonic Pulses, Don J. Roth, Harold
E. Kautz, Phillip B. Abel, Mike F. Whalen, J. Lynne Hendricks and James R. Bodis, ME, Vol. 59, No. 4, April 2001,
pp. 543-548.
Three New Calculator Programs for Ultrasonic Technicians, Albert M. Wenzig, Jr., ME, Vol. 43, No. 9, August 1985,
pp. 1064–1066.
Three-Dimension X-Ray, Robert C. Gibbons, ME, Vol. 24, No. 7, July 1966, pp. 371–372.
Three-Dimensional Defect Imaging by Multifrequency Acoustical Holography, M. Certo, ME, Vol. 41, No. 8, July
1983, pp. 946–950.
Three-Dimensional Ultrasonic Imaging of Defects and Damage in Composite Materials, Shi-Chang Wooh and Isaac
M. Daniel, ME, Vol. 52, No. 10, October 1994, pp. 1199–1206.
Through-the-Arc Sensing for Measuring Gas Metal Arc Weld Quality in Real Time, Thomas A. Siewert, Bruce
Madigan, Tim Quinn and Marie Mornis, ME, Vol. 50, No. 11, November 1992, pp. 1314, 1316–1318.
Through-Transmission Equations for Remote-Field Eddy Current Inspection of Small-Bore Ferromagnetic Tubes,
David Mackintosh, David L. Atherton and Paul Puhach, ME, Vol. 51, No. 6, June 1993, pp. 744–748.
Time for a Change—Yes, but! (Another Opinion), R.R. Hardison, ME, Vol. 45, No. 12, December 1987, pp. 1371,
1373.
Time of Flight Diffraction and Phased Array Techniques for the Detection of Small Transversal Cracks in
Hydrocracking Unit Welds in CrMoV Steel, G. Nardoni, M. Certo, P. Nardoni, M. Feroldi, D. Nardoni, L. Possenti,
A. Filosi and S. Quetti, ME, Vol. 69, No. 7, July 2011, pp. 891-898.
Time of Flight Diffraction and Synthetic Aperture Focusing Technique for NDT of Weldments, Sony Baby, K.V.
Rajkumar, R. Subbaratnam, T. Balasubramanian, R.J. Pardikar, T. Jayakumar and Baldev Raj, ME, Vol. 64, No.
11, November 2006, pp. 1089-1096.
Time of Flight Diffraction Testing of Austenitic Stainless Steel Weldments at Elevated Temperatures, R.
Subbaratnam, Saju T. Abraham, M. Menaka, B. Venkatraman and Baldev Raj, ME, Vol. 66, No. 3, March 2008,
pp. 332-337.
Time Resolution Improvement of Linear Chirp Excitation Ultrasonic Testing Based on Frequency-Phase-Amplitude
Modulation Excitation, Jiaying Zhang, Tie Gang, Chaofeng Ye, Sen Cong, and Shangyang Lin, ME, Vol. 76, No. 9,
September 2018, pp. 1228–1238.
Time Resolved Shearographic and Thermographic NDE Methods for Graphite Epoxy/Honeycomb Composite,
James B. Spicer, John L. Champion, Robert Osiander and Jane W.M. Spicer, ME, Vol. 54, No. 10, October 1996,
pp. 1210–1213.
Time Reversal Focusing of Ultrasonic Array Transducers on a Side-drilled Hold, Hyunjo Jeong, ME, Vol. 70, No. 9,
September 2012, pp. 1080–1086.
Time Reversal-based Beam Focusing of an Ultrasonic Phased Array Transducer on a Target in Anisotropic and
Inhomogenuous Welds, Hyunjo Jeong, ME, Vol. 72, No. 5, May 2014, pp. 589–596.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 157
Time-Delay Estimation of Ultrasonic Testing Signals by a Combination of Cross Correlation and Response Surface
Method, Tech Paper, Arman Mokhtari, ME, Vol. 76, No. 2, February 2018, pp. 185–191.
Time-Domain Analysis of Ultrasonic Pulse Diffraction for Defect Characterization, G.S. Mills, ME, Vol. 32, No. 12,
December 1974, pp. 256–258.
Time-Domain Deconvolution: A New Technique to Improve Resolution for Ultrasonic Flaw Characterization in
Stainless Steel Welds, W.A. Simpson, Jr., ME, Vol. 44, No. 8, July 1986, pp. 998–1003.
Time-Domain Feature-Based Classification by Size and Orientation of Near-Field Flaws Smaller than the Ultrasonic
Beamwidth, Glenn S. Kohne and Paul J. Coyne, Jr., ME, Vol. 46, No. 9, August 1988, pp. 1204–1208.
Tips for Effective Machine Learning in NDT/E, Joel B. Harley, Suhaib Zafar, Charlie Tran, ME, Vol. 81, No. 7, July
2023, https://doi.org/10.32548/2023.me-04358
Tips from the 1990 Technician of the Year, Chris C. Dewey, ME, Vol. 49, No. 10, October 1991, p. 1346.
Today’s Challenge to Energy Engineers, Dixy Lee Ray, ME, Vol. 32, No. 5, May 1974, pp. 19A–21A, 23A, 26A.
Today’s Demands on NDT Personnel, Nat Faransso, ME, Vol. 56, No. 10, October 1998, pp. 1193–1194.
Tom Flaherty Unfurls Tenth Year as NDT Entrepreneur, Beth Ann Kramer, ME, Vol. 40, No. 10, September 1982,
pp. 1026–1031.
Tomographic Image Analysis, Forrest F. Hopkins, Ira Lon Morgan, Hunter Ellinger and Rudy Klinksiek, ME, Vol. 40,
No. 12, November 1982, pp. 1226–1228.
Tools for Engine Diagnostics under the NASA Aviation Safety Program, George Y. Baaklini, Kevin Smith, David
Raulerson, Andrew L. Gyekenyesi, Jerzy T. Sawicki and Lisa Brasche, ME, Vol. 60, No. 7, July 2002, pp. 878-883.
Tools of Inspection, Rebecca H. Sparling, NDT, Vol. 12, No. 5, Sep-Oct 1954, pp. 19–28.
Toroidal, Conical and Spherical Lenses in Ultrasonic Inspection, Richard V. Murphy, ME, Vol. 39, No. 4, March
1981, pp. 391–395.
Torsional Guided Wave Attenuation in Buried Pipe, Jyin-Wen Cheng, Shiuh-Kuang Yang and Bing-Hung Li, ME,
Vol. 64, No. 4, April 2006, pp. 412-416.
Total-Flux Magnetic Method for Inspection of Installed Ferromagnetic Tubing, James G. Kirkwood and Roderic K.
Stanley, ME, Vol. 50, No. 4, April 1992, pp. 502–505.
Toward 2000: International Quality Systems and Nondestructive Testing Certification Schemes, J.D. Lavender,
ME, Vol. 49, No. 4, April 1991, pp. 518–521.
Toward a Worldwide NDT Personnel Certification System, H. Bosselaar, ME, Vol. 45, No. 9, September 1987, pp.
1006–1008, 1010–1011.
Toward Aircraft Condition-based Maintenance: SHM for Damage Detection as In-situ NDI, Catalin Mandache, ME,
Vol. 74, No. 8, August 2016, pp. 1108–1116.
Toward Characterization of Single Crystal Elastic Properties in Polycrystalline Materials using Resonant
Ultrasound Spectroscopy, T.J. Lesthaeghe, R.A. Adebisi, S. Sathish, M.R. Cherry, and P.A. Shade, ME, Vol. 75,
No. 7, July 2017, pp. 930–940.
Trade Names of Nondestructive Test Equipment and Materials, ME, Vol. 27, No. 3, March 1969, pp. 33A–38A.
Trade Names of Nondestructive Test Equipment and Materials, Supplement No. 4, Howard Heffan, ME, Vol. 31,
No. 10, October 1973, pp. 19A–20A.
Trade Names of Nondestructive Test Equipment and Materials: Supplement No. 1, ME, Vol. 28, No. 3, March
1970, pp. 21A–26A.
Trade Names of Nondestructive Test Equipment and Materials: Supplement No. 2, ME, Vol. 29, No. 4, April 1971,
pp. 19A–22A.
Trade Names of Nondestructive Test Equipment and Materials: Supplement No. 3, Howard Heffan, ME, Vol. 30,
No. 9, September 1972, pp. 44A, 46A, 48A, 50A.
Tradition with a Future: The NDT Education Situation in Eastern Germany, Ricarda Schlötcke and Jürgen Hofmann,
ME, Vol. 52, No. 3, March 1994, pp. 396–398.
Traditional and Real-time Remote NDT Instruction, Vladimir Genis, Siddharth Vyas and Jacek and Milbrandt, ME,
Vol. 68, No. 2, Febriaru 2010, pp. 128-134.
Training and Certification Requirements for NDT Personnel, Carl B. Shaw, ME, Vol. 33, No. 4, April 1975, pp. 18A,
20A, 22A, 47A.
Training and Experience of US Air Force Nondestructive Testing Personnel, Kevin Harkreader, ME, Vol. 64, No. 12,
December 2006, pp. 1139-1142.
Training and Qualifications for a Career in a Commercial X-Ray and Non-Destructive Testing Laboratory, Justin G.
Schneeman, NDT, Vol. 8, No. 4, Spring 1950, pp. 13–15.
Training for the Nondestructive Inspection of Oilfield Tubular Products, Roderic K. Stanley, ME, Vol. 44, No. 10,
September 1986, pp. 1192–1193, 1204, 1206.
Training in Industrial Radiography, W.E. Havercroft, NDT, Vol. 13, No. 3, May-June 1955, pp. 15–17, 33.
Training Tank Given First X-Ray Inspection, ME, Vol. 35, No. 10, October 1977, pp. 60–61.
Transfer Function Evaluation of Thermal Imaging Systems at the U.S. Army Electronic Proving Ground, C.G.
Murphy and J.B. Wilburn, Jr., ME, Vol. 34, No. 8, August 1976, pp. 185–188.
Transient and Steady State Vibration Testing for Structural Anomalies, Short, Scott, ME, Vol. 57, No. 1, January
1999, pp. 65-68.
Transient Wave Ultrasonic Detection of Delaminations in Composite Sandwich Panels, Liang-Wu Cai and James
H. Williams, Jr., ME, Vol. 63, No. 4, April 2005, pp. 434-442.
Transmission and Reflection-Type Ultrasonic Computed Tomography, Morio Onoe, Hiroaki Yamada and Zhong-
Chi Liu, ME, Vol. 41, No. 3, March 1983, pp. 300–301 Erratum, ME, Vol. 41, No. 7, June 1983, p. 838.
Transmission Loss through 6061 T-6 Aluminum Using a Pulsed Eddy Current Source, Kenneth H. Cavcey, ME, Vol.
47, No. 2, February 1989, pp. 216–218.