Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 125
President’s Letter, Worldwide Reach, Kevin D. Smith, ME, Vol. 73, No. 12, December 2015, p. 1517.
Pressure Change Measurement Leak Testing Errors, Jeff M. Pryor and William C. Walker, ME, Vol. 72, No. 5, May
2014, pp. 544–553.
Preventing Magnetic Particle Tank Freezing When Using Water Particle Baths, Gerald Kulchytsky, NDT Solution,
ME, Vol. 64, No. 4, April 2006, pp. 380-382.
Preventing Rail Failures in Track, G.M. Magee, ME, Vol. 23, No. 10, October 1965, pp. 508–511.
Pricilla Oliver Memorialized by Donations to Oliver Scholarship Fund, Society News, ME, Vol. 64, No. 11,
November 2006, p. 1078.
Principle of Complete Inspection, Murray E. Liebman, ME, Vol. 36, No. 8, July 1978, pp. 72–73.
Principles of High Energy Radiography, Stanley S. Stacey, NDT, Vol. 16, No. 4, July-August 1958, pp. 339–344.
Principles of Phased Array Ultrasound for Nondestructive Testing, Vincent Lupien, ME, Vol. 65, No. 1, January
2007, pp. 24-32.
Principles of Protection in Industrial Radiography, Roy M. Seideman, IR, Vol. 4, No. 1, Summer 1945, pp. 37 –41.
Principles of the Magnetic Reaction Analyzer—A New Eddy Current Test System, Robert C. McMaster and George
H. Smith, ME, Vol. 25, No. 7, July 1967, pp. 153–163.
Probability of Detecting a Critical Crack during Automated Ultrasonic Testing of Parts, John W. Mauch, ME, Vol.
66, No. 8, August 2008, pp. 825-827.
Probability of Detection Estimation for Data Sets with Rogue Points, Roger W. Hyatt, George E. Kechter and
Ronald G. Menton, ME, Vol. 49, No. 11, November 1991, pp. 1402–1408.
Probes for Remote Field Testing of Heat Exchangers: Configurations and Capabilities, David Mackintosh and Brian
Beresford, Back to Basics, ME, Vol. 63, No. 3, March 2005, pp. 292-296.
Problems in the Eddy Current Characterization of Temper Embrittlement, W.G. Clark, Jr. and W.R. Junker, ME,
Vol. 43, No. 12, November 1985, pp. 1546–1552.
Problems of a Small Gamma Ray Department, John H.G. Williams, IR, Vol. 1, No. 2, Fall 1942, pp. 35–37.
Process Compensated Resonance Testing Models for Quantification of Creep Damage in Single Crystal Nickel-
based Superalloys, Julieanne V. Heffernan, Leanne Jauriqui, Eric Biedermann, Alexander Mayes, Richard
Livings, Brent Goodlet, and Siamack Mazdiyani, ME, Vol. 75, No. 7, July 2017, pp. 941–952.
Process Compensated Resonant Testing in Manufacturing Process Control, Jim Schwarz, Jay Saxton and Leanne
Jauriqui, ME, Vol. 63, No. 7, July 2005, pp. 736-739.
Process Monitor Helps Make Jet Engines Reliable, ME, Vol. 40, No. 2, February 1982, pp. 159–160.
Production and Sizing of Uniform Two-Dimensional Flaws in Welds for NDE Calibration, Raymond E. Schramm
and Thomas A. Siewert, ME, Vol. 44, No. 9, August 1986, pp. 1136–1138.
Production and Testing of Superheater Fuel Elements, G.M. Tolson, E.C. Kirstowsky and B.J. Bogardus, ME, Vol.
29, No. 4, April 1971, pp. 75–80, 87.
Productivity Is Quality in Quantity, D.J. Talley, ME, Vol. 41, No. 1, January 1983, pp. 48–51.
Professional Accreditation of Nondestructive Testing Personnel, Michael Allgaier, ME, Vol. 49, No. 11, November
1991, pp. 1422–1427.
Profile Likelihood: What To Do When Maximum Probability of Detection Never Gets To One, Charles Annis, John
C. Aldrin, and Harold A. Sabbagh, ME, Vol. 73, No. 1, January 2015, pp. 96–99.
ProFile: Bruce Crouse, Air Capital Section, ME, Vol. 55, No. 8, August 1997, p. 884.
ProFile: Darlene Tinley, Chatanooga Section, ME, Vol. 55, No. 12, December 1997, p. 1346.
ProFile: David Mandina, New Orleans section, ME, Vol. 55, No. 5, May 1997, p. 586.
ProFile: Jay Richardson, Greater Houston Section, ME, Vol. 55, No. 6, June 1997, p. 659.
ProFile: Jay Schraan, Greater Los Angeles Section, ME, Vol. 55, No. 4, April 1997, p. 472.
ProFile: Karen Miller, Chesapeake Bay Section, ME, Vol. 55, No. 3, March 1997, p. 370.
ProFile: Richard C. Stiffler, ME, Vol. 54, No. 11, November 1996, p. 1281.
ProFile: Richard Tiefenauer, St. Louis Section, ME, Vol. 55, No. 2, February 1997, p. 146.
ProFile: Rock Tanner, Colorado Section, ME, Vol. 55, No. 1, January 1997, p. 76.
ProFile: Ruth Hanges, Idaho Section, ME, Vol. 55, No. 7, July 1997, p. 806.
ProFile: Sharon Vukelich, Miami Valley Section, ME, Vol. 55, No. 11, November 1997, p. 1240.
ProFile: Tom Bipes, Chatanooga Section, ME, Vol. 55, No. 9, September 1997, p. 975.
Profitable Mass X-Ray Inspection, Justin G. Schneeman, NDT, Vol. 6, No. 4, Spring 1948, pp. 25–29.
Program Specialist: Esther Waldman, Staff News, ME, Vol. 79, No. 9, September 2021, p. 860.
Program Trains Aircraft Inspectors, ME, Vol. 50, No. 6, June 1992, p. 783.
Programming and Graphics Support for Infrared Thermal Plotters, A.D. Levit, ME, Vol. 26, No. 9, September 1968,
pp. 180–186.
Progress in Technology and Equipment for Eddy Current Inspection, H.L. Garbarino and H.N. Nerwin, NDT, Vol.
17, No. 4, July-August 1959, pp. 229–234.
Progress in the Field of Nondestructive Testing in the United States of America 1955–1960, Raymond A. Pulk,
NDT, Vol. 18, No. 4, July-August 1960, pp. 230–231.
Progress in the Inspection of Explosive Charges in Projectiles, Roy E. Thorpe, IRNDT, Vol. 5, No. 4, Spring 1947,
pp. 24–25, 28–29.
Progress Report: Argentina Institute for NDT and Quality Control, John D. Hislop, ME, Vol. 31, No. 2, February
1973, p. 17A.
Progress with Coiled Line Pipe, Roderic K. Stanley, ME, Vol. 63, No. 5, May 2005, pp. 476-479.
Projector for X-Ray Film, Berlyn Brixner and John A. Richards, ME, Vol. 25, No. 6, June 1967, pp. 31A–32A.
Promising Quantitative Nondestructive Evaluation Techniques for Composite Materials, James H. Williams, Jr.
and Samson S. Lee, ME, Vol. 43, No. 5, April 1985, pp. 561–565.
Proof Loading—An Essential Non-Destructive Test, John C. New, IRNDT, Vol. 5, No. 4, Spring 1947, pp. 37–40.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 126
Proper Basic Thermal Imager Settings for Thermographic Inspections, Back to Basics, Sonny James, ME, Vol. 76,
No. 11, November 2018, pp. 1470–1477.
Proper Use of Light During Testing, H. Allen Sanders, ME, Vol. 69, No. 2, February 2011, pp. 164-167.
Properties of Some Radioactive Isotopes Useful in Radiography, Jerome Kohl, NDT, Vol. 11, No. 7, September
1953, pp. 33–37.
Property Evaluation of 2Cr13 Tempered Steel Based on the Magnetic Memory Technique, Long Feifei, Yang Yang,
Wang Jianzeng, Dai Guang, ME, Vol. 76, No. 6, June 2018, pp. 845–852.
Property Evaluation of Thermal Sprayed Metallic Coatings by Acoustic Emission Analysis, Asako Ishida, Yoshihiro
Mizutani, Mikio Takemoto and Kanji Ono, ME, Vol. 58, No. 3, March 2000, pp. 449-454.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 67, No. 8,
August 2009, pp. 882-885.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 70, No. 7,
July 2012, pp. 804–808.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 73, No. 6,
June 2015, pp. 662–668.
Proposed Amendments to ASNT Bylaws Presented for Member Consideration, Special Notice, ME, Vol. 75, No. 6,
June 2017, pp. 648–649.
Proposed ASNT Bylaws, Special Notice, ME, Vol. 63, No. 8, August 2005, p. 812.
Proposed NDT Personnel Qualification and Certification: Recommended Practice SNT-TC-1 (Tentative),
Supplement C—Ultrasonic Method, ME, Vol. 22, No. 7, July 1964, pp. 327–330.
Prospectus for NDT in the Saturn and Advanced Space Flight Programs, Lowell K. Zoller, ME, Vol. 24, No. 11,
November 1966, pp. 637–640.
Protection Against X-Rays and Gamma Rays: Genetic Injury, Paul S. Henshaw, IR, Vol. 4, No. 2, Fall 1945, pp. 37–
38.
Protection Against X-Rays and Gamma Rays: Human Factors, Robert B. Taft, IR, Vol. 4, No. 2, Fall 1945, pp. 38–
39.
Protection Against X-Rays and Gamma Rays: Materials and Methods of X-Ray Protection, George Singer, IR, Vol.
4, No. 2, Fall 1945, pp. 40–44.
Protection Against X-Rays and Gamma Rays: Radiation Injury, Robert S. Stone, IR, Vol. 4, No. 2, Fall 1945, pp. 36–
37.
Protection Against X-Rays and Gamma Rays: The Tolerance Dose or Tolerance Intensity, Edith H. Quimby, IR, Vol.
4, No. 2, Fall 1945, pp. 35–36.
Protection Against X-Rays and Gamma Rays: X-Ray Protection in Industrial Fluoroscopy, George C. Henny, IR, Vol.
4, No. 2, Fall 1945, pp. 39–40.
Protocol Assessment of a Field Reliability Experiment at the NDI Validation Center, Mike Ashbaugh and Floyd W.
Spencer, ME, Vol. 53, No. 7, July 1995, pp. 827–828.
Prototype of an In-Service Inspection System (ISIS) for Composites, Francis H. Chang, Jerry R. Bell, Jeffrey L. Brown
and R.W. Haile, ME, Vol. 43, No. 9, August 1985, pp. 1117–1123.
Proved Ultrasonic Methods for Strip and Plate Testing, H. Krautkrämer, ME, Vol. 22, No. 9, September 1964, pp.
404–408.
Provocative Techniques in Thermal NDT Imaging, G.J. Trezek and Sheldon Balk, ME, Vol. 34, No. 8, August 1976,
pp. 172–176.
Psychic’s Clues Track Train Defect, Sam Smith and Janet Cawley, ME, Vol. 38, No. 10, October 1980, p. 46.
Publications Manager McIntire Retires, Society News, ME, Vol. 63, No. 12, December 2005, p. 1186.
Pulsed Eddy Current Application to the Detection of Deep Cracks, Bruno Lebrun, Yves Jayet and Jean Claude
Baboux, ME, Vol. 53, No. 11, November 1995, pp. 1296–1300.
Pulsed Eddy Current Inspection of Thin-Walled Reactor Fuel Tubing, T.H. Busse and N.S. Beyer, ME, Vol. 28, No.
10, October 1970, pp. 228–236.
Pulsed Eddy Current Testing Apparatus for Use on Smooth and Ribbed Tubing, Allen Sather, ME, Vol. 35, No. 12,
December 1977, pp. 55–59.
Pulsed Eddy Current Testing of Friction Stir Welds, Catalin Mandache, Laurent Dubourg, Ali Merati and
Mohammad Jahazi, ME, Vol. 66, No. 4, April 2008, pp. 382-386.
Pulsed Eddy Current Testing, Casper Wassink and Paul Crouzen, ME, Vol. 76, No. 6, June 2018, pp. 700–705.
Pulsed Fast Neutron Analysis May Help Quench Terrorism, Rand H. Fishbein, ME, Vol. 55, No. 12, December 1997.
Pulsed Infrared Imaging: A New NDT Methodology for Aboveground Storage Tanks, Maurice J. Bales and C.C.
Bishop, ME, Vol. 52, No. 7, July 1994, pp. 814–815.
Pulsed Thermography Signal Processing Techniques Based on the 1D Solution of the Heat Equation Applied to
the Inspection of Laminated Composites, Fernando Lopez, Clemente Ibarra-Castanedo, Xavier Maldague and
Vicente de Paulo Nicolau, ME, Vol. 72, No. 1, January 2014, pp. 91–102.
Pulsed Ultrasonic Flaw Detection Model, Steven Serabian and John C. O’Callahan, ME, Vol. 43, No. 7, June 1985,
pp. 873–878.
Purpose of Pursuit of NDE 4.0, Back to Basics, Ripi Singh, ME, Vol. 78, No. 7, July 2020, pp. 784–793.
Pursuing Personal Excellence in NDT, Gordon E. Smith, ME, Vol. 44, No. 7, June 1986, pp. 836–838.
Q
Qualification and Certification of Nondestructive Testing Personnel, Earl R. Pade, ME, Vol. 28, No. 11, November
1970, pp. 23A–27A, 30A.