Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 163
Ultrasonic Phased Array Testing for an Isogrid Structural Element with Crack, D.J. Roth, R. P. Tokars, R. E. Martin
R. W. Rauser, J. C. Aldrin and E. J. Schumacher, ME, Vol. 68, No. 1, January 2010, pp. 76-83.
Ultrasonic Phased Array Testing Situations of Welded Components at NASA, D. J. Roth, J. C. Aldrin and E. J.
Schumacher, ME, Vol. 67, No. 1, January 2009, pp. 60-65.
Ultrasonic Phased Arrays for Nondestructive Inspection of Forgings, Hermann Wüstenberg, Bernhard Rotter,
Hans Peter Klanke and Dieter Harbecke, ME, Vol. 51, No. 6, June 1993, pp. 669–672 Erratum, ME, Vol. 51, No.
8, August 1993, p. 862.
Ultrasonic Phased Arrays for Weld Testing, Anmol S. Birring, ME, Vol. 66, No. 3, March 2008, pp. 282-284.
Ultrasonic Phased Arrays: An Introduction to the Technical Focus Issue, ME, Vol. 65, No. 1, January 2007, p. 23.
Ultrasonic Polar Scan Imaging of Damaged Fiber Reinforced Composites, L. Satyanarayan, John M. Vander Weide
and Nico F. Declerq, ME, Vol. 68, No. 6, June 2010, pp. 733-739.
Ultrasonic Prediction of Grain Size and Mechanical Properties in Plain Carbon Steel, Richard Klinman and Edward
T. Stephenson, ME, Vol. 39, No. 12, November 1981, pp. 1116–1120.
Ultrasonic Prediction of Grain Size, Strength and Toughness in Plain Carbon Steel, Richard Klinman, G.R. Webster,
F.J. Marsh and Edward T. Stephenson, ME, Vol. 38, No. 10, October 1980, pp. 26–32.
Ultrasonic Probability of Detection of Subsurface Flaws, Steven Serabian, ME, Vol. 40, No. 3, March 1982, pp.
294–298.
Ultrasonic Probes Using Shear Wave Crystals—Principles, Lawrence C. Lynnworth, ME, Vol. 25, No. 12, December
1967, pp. 265–277.
Ultrasonic Procedure for Inspecting Aluminum Aircraft Wheels, C.E. Guzi and J.W. Robertson, ME, Vol. 30, No. 5,
May 1972, pp. 109–112.
Ultrasonic Procedures for Predicting Adhesive Bond Strength, Joseph L. Rose and Paul A. Meyer, ME, Vol. 31, No.
6, June 1973, pp. 109–114.
Ultrasonic Properties of IIW Type Reference Blocks, Part 1: Measurements of Primary Properties, Terence P.
Lerch, Martin C. Renken and Christopher M. Fortunko, ME, Vol. 58, No. 9, September 2000, pp. 1075-1079.
Ultrasonic Properties of IIW Type Reference Blocks, Part 2: Variability of Angle Beam Response, Terence P. Lerch,
Martin C. Renken and Christopher M. Fortunko, ME, Vol. 58, No. 10, October 2000, pp. 1235-1239.
Ultrasonic Pulse-Echo Instrument Linearity Measurement, Jeffrey A. Bailey, ME, Vol. 35, No. 5, May 1977, pp. 64–
68.
Ultrasonic Pulse-Echo Techniques for Evaluating Thickness, Bonding and Corrosion, Donald C. Erdman, NDT, Vol.
18, No. 6, November-December 1960, pp. 408–410.
Ultrasonic Reference Standards Key to Reliable Ultrasonic Inspection, Harold Ellerington, ME, Vol. 28, No. 11,
November 1970, pp. 251–256.
Ultrasonic Refraction Angles for Inspection Throughout the Total Wall Thickness of Tubes and Pipes, Kenneth H.
Beck, ME, Vol. 51, No. 5, May 1993, pp. 607–612.
Ultrasonic Seam Tracking in the Vicinity of an Operating Welding Torch, Charles I. Umeagukwu, Russell Lambert,
Gregory Teese and Jacek Jarzynski, ME, Vol. 48, No. 4, April 1990, pp. 466–470.
Ultrasonic Signal Processing for Thickness Measurements and Detection of Near-Surface Defects, Luc Paradis,
Yves Serruys and Robert Saglio, ME, Vol. 44, No. 11, October 1986, pp. 1344–1349.
Ultrasonic Signal-Processing Concepts for Measuring the Thickness of Thin Layers, Joseph L. Rose and Paul A.
Meyer, ME, Vol. 32, No. 12, December 1974, pp. 249–255, 258.
Ultrasonic Sound Path Slide, Tom R. Moore and Andras Matolcsy, ME, Vol. 42, No. 8, July 1984, pp. 979–980.
Ultrasonic Spectral Analysis Methodology for Thickness Mapping of Electrochemical Hydrogen Meter Thimbles,
Govind K. Sharma, Anish Kumar, K.V. Rajkumar, Manjulata Sahu, T. Jayakumar, S. Nagraj, Kitheri Joseph and
Baldev Raj, ME, Vol. 4, April 2007, pp. 417-422.
Ultrasonic Spectroscopy of Composite Rings for Space Station Flywheel Rotors, Laura M. Cosgriff and George Y.
Baaklini, ME, Vol. 61, No. 9, September 2003, pp. 1013-1019.
Ultrasonic Spot Weld Testing and Profitability in the Automotive Industry, Robert A. Tuttle and Brian Frazzini, ME,
Vol. 64, No. 11, November 2006, pp. 1064-1066.
Ultrasonic Studies for Microstructural Characterization of A98090 Aluminum-Lithium Alloy, V. Rajendran, S.
Muthukumaran, T. Jayakumar, P. Palanichamy and Baldev Raj, ME, Vol. 63, No. 8, August 2005, pp. 837-842.
Ultrasonic Study of Adhesive Bond Quality at a Steel-to-Rubber Interface by Using Quadrature Phase Detection
Techniques, Alphonso C. Smith and Haesuk Yang, ME, Vol. 47, No. 12, December 1989, pp. 1396–1400.
Ultrasonic Technique for Global Anisotropic Property Measurement in Composite Materials, Ronald A. Kline and
Zhong-Tai Chen, ME, Vol. 46, No. 7, June 1988, pp. 986–992.
Ultrasonic Technique to Detect Corrosion in DC-9 Wing Box from Concept to Field Application, Igor N. Komsky,
January D. Achenbach, Glenn Andrew, Bob Grills, Jeff Register, Greg Linkert, Gerardo M. Hueto, Al Steinberg,
Mike Ashbaugh, David G. Moore and Hans Weber, ME, Vol. 53, No. 7, July 1995, pp. 848–852.
Ultrasonic Technique Using Secondsry Signals for Blind Thickness Characterization in Multilayer Structural Joints,
David R. Judd, John C. Aldrin and Bart Drennan, ME, Vol. 69, No. 5, May 2011, pp. 585–596.
Ultrasonic Techniques for Detection of High Temperature Hydrogen Attack, Anmol S. Birring, Mathieu
Riethmuller and Koji Kawano, ME, Vol. 63, No. 2, February 2005, pp. 110-115.
Ultrasonic Techniques for Detection of Weak Adhesion, Melody A. Drewry, Robert A. Smith, Albert P. Phang,
Dawai Yan, Paul Wilcox and Dennis P. Roach, ME, Vol. 67, No. 9, September 2009, pp. 1048-1058.
Ultrasonic Techniques for Measuring the Strength of Adhesive Bonds, George A. Alers, Paul L. Flynn and Michael
J. Buckley, ME, Vol. 35, No. 4, April 1977, pp. 77–84 Erratum, ME, Vol. 35, No. 6, June 1977, p. 62.
Ultrasonic Technology for Measuring Molten Aluminum Quality, Thomas L. Mansfield, ME, Vol. 41, No. 6, May
1983, pp. 743–747.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 164
Ultrasonic Test Procedure for Evaluating Fuel Clad Endcap Weld Joints of PHWRs, C.V. Subramanian, M.
Thavasimuthu, C. Rajagopalan, P. Kalyanasundaram and Baldev Raj, ME, Vol. 53, No. 11, November 1995, pp.
1290–1295.
Ultrasonic Test System for Longitudinal Fusion Welds in Pipe, W.C. Harmon and T.W. Judd, ME, Vol. 32, No. 3,
March 1974, pp. 45–49.
Ultrasonic Testing Calibration using Reference Blocks, Talaat Mohamed Haggag, ME, Vol. 73, No. 12, December
2015, pp. 1543–1548.
Ultrasonic Testing for Hydrogen Induced and Stress Corrosion Cracking in the Oil and Gas Industry, Abdul Wahab
Al-Mithin, G. Santhosh Kumar, Vinayak Sardesai and John William D’sa, ME, Vol. 68, No. 1, January 2010, pp.
37-44.
Ultrasonic Testing for Transverse Discontinuities in Dissimilar Welds: Theoretical and Experimental Results, V.
Munikoti, G. Brekow, U. Tessaro and A. Erhard, ME, Vol. 62, No. 11, November 2004, pp. 1148-1153.
Ultrasonic Testing Helps Keep Soap Box Derby Safe, ME, Vol. 37, No. 12, November 1979, p. 30.
Ultrasonic Testing in Nuclear Plants, Anmol Birring, James Williams, ME, 80 (6), June 2022: 24–30,
https://doi.org/10.32548/2022.me-04269
Ultrasonic Testing in Submarine Construction, Charles J. Hellier, ME, Vol. 24, No. 9, September 1966, pp. 512–
517.
Ultrasonic Testing in the North Sea: A Short Story, Michael Reilly, ME, Vol. 49, No. 2, February 1991, pp. 283–285.
Ultrasonic Testing of Adhesive Bonds Using the Fokker Bond Tester, Donald F. Smith and Charles V. Cagle, ME,
Vol. 24, No. 7, July 1966, pp. 362–370.
Ultrasonic Testing of Annealing Behavior and Texture and Determination of Texture Coefficients in Stainless Steel,
P. Palanichamy and M. Vasudevan, ME, Vol. 61, No. 9, September 2003, pp. 1020-1025.
Ultrasonic Testing of Austenitic Stainless Steel Weldments by Means of Transmitter-Receiver Type Longitudinal
Wave Angle-Beam Probe, Hiroshi Yoneyama, Saburo Shibata and Moritaka Kishigami, ME, Vol. 40, No. 5, April
1982, pp. 554–559.
Ultrasonic Testing of Bridge Pins and Hanger Straps, David E. Kelsey and Marcus A. Rotundo, ME, Vol. 48, No. 4,
April 1990, pp. 488, 490–491, 493 Errata, ME, Vol. 48, No. 6, June 1990, p. 796.
Ultrasonic Testing of Buried High-Level Radioactive Waste Storage Tanks, James B. Elder, Rodney V. Vande Kamp
and Bruce J. Wiersma, ME, Vol. 67, No. 8, August 2009, pp. 888-894.
Ultrasonic Testing of Cast Iron Pipe, G.B. Baumeister, NDT, Vol. 11, No. 3, January 1953, pp. 28–29.
Ultrasonic Testing of Composites 101, William Tapia, ME, Vol. 72, No. 1, July 2014, pp. 866–873.
Ultrasonic Testing of Concrete Structures, John S. Popovics, ME, Vol. 63, No. 1, January 2005, pp. 50-55.
Ultrasonic Testing of Concrete Using Split Spectrum Processing, Meric Karaoguz, Nihat Bilgütay, Akgül Tayfun and
Sandor Popovics, ME, Vol. 57, No. 11, November 1999, pp. 1183-1190.
Ultrasonic Testing of Irradiated Fuel Sheathing, H.B. Patel, A. Ditschun and A.E. Hunton, ME, Vol. 33, No. 3, March
1975, pp. 49–55.
Ultrasonic Testing of Material for Nuclear Components, Frank W. Armstrong, NDT, Vol. 15, No. 6, November-
December 1957, pp. 342–344, 350.
Ultrasonic Testing of Melt-Through Welds in Small-Diameter, Thin-Walled Tubing Couplers, Donald J. Hagemaier
and G.J. Posakony, ME, Vol. 26, No. 11, November 1968, pp. 221–226.
Ultrasonic Testing of Plates Containing Edge Cracks, James H. Williams, Jr., Hira Karagülle and Samson S. Lee, ME,
Vol. 44, No. 1, January 1986, pp. 100–107.
Ultrasonic Testing of Properties of 50 Year Old Concrete, Osama A. Mohamed and Kevin L. Rens, ME, Vol. 59, No.
12, December 2001, pp. 1426-1430.
Ultrasonic Testing of Ring-Type Joint Flanges for Detection of Chloride Stress Corrosion Induced Cracking, Rajesh
Bose and Robert Felch, ME, Vol. 65, No. 12, December 2007, pp. 1180-1185.
Ultrasonic Testing of the Clinch River Breeder Reactor Steam Generator Tubing, Robert A. Day and D.S. Kerr, ME,
Vol. 39, No. 1, January 1981, pp. 69–73.
Ultrasonic Testing of Welds by Time of Flight Diffraction: Codes, Guidelines and Standards, Anmol S. Birring and
Bharat K. Nidathavolu, ME, Vol. 63, No. 9, September 2005, pp. 910-914.
Ultrasonic Testing Procedures, J.B. Morgan, NDT, Vol. 17, No. 1, January-February 1959, pp. 32–36.
Ultrasonic Testing Sensitivity Selection Based on Probabilistic Techniques, Alexander J. Rogovsky and Joseph L.
Rose, ME, Vol. 37, No. 4, March 1979, pp. 47–55.
Ultrasonic Testing Signal Enhancement by Piece-wise Deconvolution, Amin Yaghootian, Farhang Honarvar, Mehdi
Zeighami and Anthony N. Sinclair, ME, Vol. 70, No. 5, May 2012, pp. 570–578.
Ultrasonic Testing Standards for Steel Products, J.B. Morgan, NDT, Vol. 20, No. 3, May-June 1962, pp. 167–172.
Ultrasonic Testing using Matrix Arrays for Discontinuity Detection, G. Brekow, H.-J. Montag, R. Boehm, D.
Brackrock and J. Kitze, ME, Vol. 72, No. 9, September 2014, pp. 1131–1137.
Ultrasonic Testing with a Signal Processing Method for Thermal Sprayed Coatings, Hiroaki Hatanaka, Ichiro
Kajigaya and Takahiro Arakawa, ME, Vol. 62, No. 6, June 2004, pp. 683-689.
Ultrasonic Testing with Lamb Waves, D.C. Worlton, NDT, Vol. 15, No. 4, July-August 1957, pp. 218–222.
Ultrasonic Testing, Donald Erdman, NDT, Vol. 8, No. 2, Fall 1949, pp. 28–30.
Ultrasonic Testing, ME, Vol. 61, No. 4, April 2003, pp. 502-504.
Ultrasonic Tests on Materials with Protective Coatings, H.L. Whaley, ME, Vol. 35, No. 12, December 1977, pp. 65–
68.
Ultrasonic Theory Applied to the Automatic Inspection of Welds, J.F. Lovelace and L.A. Luini, ME, Vol. 26, No. 10,
October 1968, pp. 204–210.
Ultrasonic Thickness Gaging Accuracy in Tubulars, Brian K. Wood, ME, Vol. 63, No. 9, September 2005, pp. 915-
918.