Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 49
Detection of Localized Heat Damage in a Polymer Matrix Composite by a Thermoelastic Technique, John Weler,
Shamachary Sathish, Erik Ripberger and Eric Lindgren, ME, Vol. 65, No. 8, August 2007, pp. 823-826.
Detection of Material Discontinuities with Liquid Crystals, W.E. Woodmansee and H.L. Southworth, ME, Vol. 26,
No. 8, August 1968, pp. 149–154.
Detection of Planar Defects in Multilayered GFRP Composite Structures Using Low-Field Nuclear Magnetic
Resonance, Tech Paper, Sanjaya K. Sahoo, Srinivas Kuchipudi, R. Narasimha Rao, Manoj K. Buragohain, and Ch.
Sri Chaitanya, ME, Vol. 79, No. 9, September 2021, pp. 897–904.
Detection of Porosity in Glass Ceramic Matrix Composites Using an Ultrasonic Multiple-Gate C-Scan Technique,
David A. Stubbs and Larry P. Zawada, ME, Vol. 54, No. 7, July 1996, pp. 827–831.
Detection of Strain By Coherent Optical Techniques, K.C. Chuang and R.K. Mueller, ME, Vol. 27, No. 4, April 1969,
pp. 76–78.
Detection of Titanium Hydride by Neutron Radiography, Donald J. Hagemaier, J. Halchak and G. Basl, ME, Vol. 27,
No. 9, September 1969, pp. 193–198.
Detection of Ultrasonic Anomoly Signals Using Wavelet Decomposition, Rashmi Murthy, Nihat M. Bilgutay and O.
Kagan Kaya, ME, Vol. 55, No. 11, November 1997, pp. 1274–1279.
Detection Systems Will Locate Debris Damage in Space Station, ME, Vol. 51, No. 1, January 1993, p. 46.
Deterioration and Contamination of Developers Used in Liquid Penetrant Testing, Back to Basics, William E. Mooz,
ME, Vol. 75, No. 9, September 2017, pp. 1086–1089.
Determination of Attenuation Coefficients of Ultrasonic Transverse Waves in Steels, Kaname Matsuwaki, ME, Vol.
61, No. 10, October 2003, pp. 1148-1153.
Determination of Concrete Dynamic Elastic Constants Using a Miniature Seismic Reflection System, Afshin Sadri,
Ferri P. Hassani and Kaveh Saleh, ME, Vol. 55, No. 7, July 1997, pp. 817–820.
Determination of Crack Orientation by Acoustic Emission, Masayasu Ohtsu, ME, Vol. 45, No. 9, September 1987,
pp. 1070–1075, 1082.
Determination of Defect Characteristics Using Focused Probes, Robert Saglio, André C. Prot and Anne M. Touffait,
ME, Vol. 36, No. 1, January 1978, pp. 62–66.
Determination of Effective Setups for Ultrasonic Testing Based on Numerical Simulations Using Ray Tracing and
the Mass Spring Lattice Model, Eunsol Baek and Hyunjune Yim, ME, Vol. 67, No. 1, January 2009, pp. 49-56.
Determination of Effects of Plastic Medium Blast on Surface-Crack Detection by Fluorescent Penetrant Inspection
in Wrought Aluminum Alloys, Dayle A. Conrad and Gina R. Caudill, ME, Vol. 48, No. 8, August 1990, pp. 985–
990, 1000.
Determination of Fracture Parameters of Mortar and Concrete Beams by Using Acoustic Emission, H.L. Chen, C.T.
Cheng and S.E. Chen, ME, Vol. 50, No. 7, July 1992, pp. 888–894.
Determination of Grain-Size Distribution Function Using Two-Dimensional Fourier Transforms of Tone-Pulse-
Encoded Images, Edward R. Generazio, ME, Vol. 46, No. 4, March 1988, pp. 528–534.
Determination of Microfocus X-Ray Focal Spot Size Using Electron Beam Damage on the Target, P.R. Vaidya, K.R.
Gurumurthy, A.K. Sinha and B.K. Godwal, ME, Vol. 59, No. 8, August 2001, pp. 967-970.
Determination of Nondestructive Inspection Reliability Using Field or Production Data, Duane P. Johnson, ME,
Vol. 36, No. 1, January 1978, pp. 78–84.
Determination of Radiographic Methods to Reduce Effects of Diffraction Mottling, R.H. Arndt and J.E. Bigelow,
ME, Vol. 23, No. 9, September 1965, pp. 445–448.
Determination of Source-to-Object Angle for Circumferential Welds, Ronald F. Eyerkuss and Roger W. Engelbart,
ME, Vol. 42, No. 8, July 1984, p. 978.
Determination of the Performance of Holographic Nondestructive Testing Systems, Frederick C. Way, ME, Vol.
29, No. 7, July 1971, pp. 148–152, 164.
Determination of the Size and Mechanical Properties of a Cylindrical Fluid Inclusion in an Elastic Solid, Wolfgang
Sachse and Chian-Thang Chian, ME, Vol. 33, No. 4, April 1974, pp. 81–88.
Determination of Thermocouple Location in Reentry Vehicles by Penetrating Radiation, M.V. Grund, NDT, Vol.
18, No. 4, July-August 1960, pp. 258–262.
Determining 2-2T Equivalent IQI Sensitivity in Radiographs, Daniel Potter, ME, Vol. 77, No. 8, August 2019, pp.
1012–1020.
Determining Crack Depth in a High-Strength Steel Cylinder Using Magnetic Perturbation, Alfred P. Steinberg,
Donald J. Hagemaier, John R. Barton and Russell D. Williams, ME, Vol. 40, No. 3, March 1982, pp. 288–293.
Determining Discontinuity Alignment Using Radiography, Russell Dean Wallace, Oliver Scholarship, ME, Vol. 64,
No. 10, October 2006, pp. 990-991.
Determining Performance Leak Test Guidelines for Evaluation of High-Pressure, High-Temperature Wellhead
Equipment, Bruce Boring, ME, Vol. 47, No. 11, November 1989, pp. 1266–1267.
Determining the Linearity of an Ultrasonic Unit, Don G. Cosgrove, ME, Vol. 25, No. 11, November 1967, pp. 259–
263.
Determining Variability of Wall Thickness Measurements During Ultrasonic Inspection of Shipsystem
Components, Norman J. Gleicher, Jack R. Nicholas, Jr. and Robert J. Willingham, ME, Vol. 36, No. 13, December
1978, pp. 47–52.
Developing a New Course on Applied Nondestructive Testing, Thomas F. Lukcah, ME, Vol. 63, No. 8, August 2005,
pp. 804-805.
Developing an Advanced Method for Detecting Defects in Solid Rocket Motors, ME, Vol. 50, No. 12, December
1992, p. 1417.
Developing and Modifying a Technique in Film Radiography, Ringo Conway Beaumont, ME, Vol. 69, No. 4, April
2011, pp. 442-451.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 50
Developing NDT Technologies for Highway Bridges, Glenn A. Washer, ME, Vol. 57, No. 11, November 1999, 1151-
1161.
Developing Raman Spectroscopy for the Nondestructive Testing of Carbon Fiber Composites, Glenn Washer and
Frank Blum, Jr., ME, Vol. 69, No. 10, October 2011, pp. 1219–1226.
Developing, Optimizing and Validating Automated Ultrasonic Procedures for Testing Heavy Walled
Hydroprocessing Reactors, M.G. Lozev and R.L. Spencer, ME, Vol. 63, No. 9, September 2005, pp. 926-932.
Development and Application of Ultrasonic Dry-Contact and Air-Contact C-Scan Systems for Nondestructive
Evaluation of Aerospace Composites, Alexander J. Rogovsky, ME, Vol. 49, No. 12, December 1991, pp. 1491–
1497.
Development and Applications of Fast-Sensitive Magnetic Rubber Inspection Formulations, Henry J. Weltman,
W.T. Kaarlela, Jack D. Reynolds and John E. Halkias, ME, Vol. 42, No. 7, June 1984, pp. 917–921.
Development of a Digital Radiographic Flat Panel for NDT and Homeland Security, Adar Yiron, ME, Vol. 63, No.
12, December 2005, pp. 1177-1180.
Development of a Divided-Ring Array for Three-Dimensional Beam Steering in Ultrasonic Nondestructive Testing:
Theoretical and Experimental Results of a Prototype, Hans-Peter Schwarz, ME, Vol. 45, No. 8, August 1987, pp.
951–957.
Development of a Large Automatic Ultrasonic Plate Testing Installation with Online Computer Data Output,
Guenter Kuenne, ME, Vol. 33, No. 4, April 1975, pp. 73–80.
Development of a Manually Operated Multiple-Transducer Ultrasonic Instrument for Inspecting Plates, E.M.
Nusbickel and R.N. Cressman, ME, Vol. 28, No. 1, January 1970, pp. 1–7.
Development of a Method for an Accurate Assessment of the Radiographic Image Quality Using Standardized
Step/Hole Type IQIs, Jacques Chéret, ME, Vol. 35, No. 5, May 1977, pp. 47–53, 58.
Development of a Monochromatic Radiographic Method for Locating Small Defects in Aluminum Alloy Castings,
George L. Clark and R.W. Eyler, IR, Vol. 3, No. 1, Summer 1944, pp. 13–18.
Development of a Nondestructive Testing Methods Course for Engineers at the University of Kansas, Guillermo
Ramirez, ME, Vol. 59, No. 4, April 2001, pp. 512-514.
Development of a Portable Device for Thermoelectric Power Measurement: Application to the Testing of Duplex
Stainless Steel Componenets, Jean-François Coste, Jean-Marie Leborgne, Jean-Paul Massoud, Odile Grisot,
René Borrelly and Jean-Louis Bouvier-Volaille, ME, Vol. 59, No. 3, March 2001, pp. 401-405.
Development of a Portable, High-Energy Radiographic Source, Eugene R. Reinhart, Samuel A. Wenk, R.G.
Schonberg and G.L. Mixon, ME, Vol. 37, No. 1, January 1979, pp. 37–42, 47.
Development of a Radiographic Technique for Mated Electrical Connectors, Roderick W. Browne and W.B.
Robertson, ME, Vol. 25, No. 10, October 1967, pp. 221–225.
Development of an Acoustic Emission Model for Adhesive Wear, Tech Paper, Cevat Teymuri-Sindi, ME, Vol. 77,
No. 4, April 2019, pp. 529–534.
Development of an Automated Ultrasonic Inspection System for Verifying Waste Container Integrity, Jeffrey F.
Cook, Donna A. Aldrich, Burdell C. Anderson and V. Stanley Scown, ME, Vol. 42, No. 13, December 1984, pp.
1626–1630.
Development of an Automatic Ultrasonic Texture Instrument and Its Transition from Laboratory to Market: A
Model for Technology Transfer, Emmanuel P. Papadakis, R. Bruce Thompson, Samuel J. Wormley, Delwyn D.
Bluhm, Harold D. Skank, George A. Alers, Kaveh Forouraghi, James R. Griffiths, Robert M. Parker, William D.
Thomas and David H. Birlingmair, ME, Vol. 51, No. 1, January 1993, pp. 77–85.
Development of an Improved Sonic Resonance Inspection System for Nodularity in Crankshafts, Bela V. Kovacs,
Jack Stone and Emmanuel P. Papadakis, ME, Vol. 42, No. 7, June 1984, pp. 906–916.
Development of an In-Pipe Inspection Vehicle, Shigeru Fujiwara, ME, Vol. 53, No. 5, May 1995, pp. 566–569.
Development of an Innovative Inspection Tool for Superheater Tubes in Fossil Fuel Power Plants, Tech Paper,
Caique Lara, Julie Villamil, Anthony Abrahao, Aparna Aravelli, Guilherme Daldegan, Sharif Sarker, Daniel
Martinez, and Dwayne McDaniel, ME, Vol. 79, No. 7, July 2021, pp. 728–738.
Development of an Inspection Measurement Lab at California State University, Long Beach, Parviz Yavari, ME,
Vol. 66, No. 9, September 2008, pp. 917-920.
Development of an Operational Helium Leak Detection System for the National Space Transportation System,
Vincent J. Bilardo, Jr. and William Van Dusen, Jr., ME, Vol. 47, No. 11, November 1989, pp. 1301–1307.
Development of an Ultrasonic Inspection Technique for Sizing of Cracks in Complex Geometry Plant Components,
S.K. Nath, ME, Vol. 74, No. 5, May 2016, pp. 651–657.
Development of an Ultrasonic Method for Determination of Grain Size in Cast Steel, G. DiGiacomo, G. Ohlstein
and W.J. Jones, ME, Vol. 28, No. 12, December 1970, pp. 271–276.
Development of an Ultrasonic Phased Array for Nondestructive Testing of Pipes: Theory and Practice, Qingshan
Yuan, Yanming Guo, Zhigang Sun and Clive Lam, ME, Vol. 69, No. 4, April 2011, pp. 501–506 errata Vol. 69, No.
5, May 2011, p. 569.
Development of an Ultrasonic Testing Technique for the NDT of Breeder Reactor End Cap Welds, D. Mukherjee,
M.M. Saxena, D.B. Sathe, J.P. Panakkal and H.S. Kamath, ME, Vol. 64, No. 11, November 2006, pp. 1097-1101.
Development of an Undergraduate Course on NDT, Piervincenzo Rizzo, ME, Vol. 66, No. 9, September 2008, pp.
914-915.
Development of an Undergraduate Course on Nondestructive Testing, Francesco Lanza di Scalea and Vistasp M.
Karbhari, ME, Vol. 62, No. 8, August 2004, p. 829.
Development of ASTM Standard Reference Blocks for Ultrasonic Inspection, F.C. Panian and Howard E. Van
Valkenburg, NDT, Vol. 19, No. 1, January-February 1961, pp. 45–57.
Development of High-Sensitivity and Low-Noise Integrated Acoustic Emission Sensor, Mitsuharu Shiwa, Hidehiro
Inaba, Steve H. Carpenter and Teruo Kishi, ME, Vol. 50, No. 7, July 1992, pp. 868–874.