Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 61
Etching for Localized Penetrant Inspection, Roger W. Engelbart, ME, Vol. 43, No. 9, August 1985, p. 1062.
European Standards and Nondestructive Testing Uses, Harvey E. Schock, Jr., ME, Vol. 49, No. 3, March 1991, pp.
382–384, 387–388, 390, 393–394, 396–398.
Evaluating Damage in Simple-span Prestressed Concrete Girders using Acoustic Emission: Laboratory Specimens
and Existing County Bridge, Mohamed K. ElBatanouny, Rafal Anay, David V. Jauregui, and Paul Ziehl, ME, Vol.
75 No. 1, January 2017, pp. 77–83.
Evaluating EMAT Designs for Selected Applications, Bruce W. Maxfield, Aki Kuramoto and J. Keith Hulbert, ME,
Vol. 45, No. 10, October 1987, pp. 1166–1183.
Evaluating Structural Properties of New Ceramic Candle Filters Using the Dynamic Characterization Method,
Hung-Liang (Roger) Chen and Alejandro C. Kiriakidis, ME, Vol. 59, No. 1, January 2001, pp. 63-69.
Evaluating the Results of Acoustic Emission Tests Applied to Industrial Equipment, Pedro Feres, Jr., ME, Vol. 46,
No. 2, February 1988, pp. 215–219.
Evaluating the Stability of a Metric for Determining the Health of Armor Plates, Thomas J. Meitzler, Thomas
Reynolds, Samuel Ebenstein and Gregory Smith, ME, Vol. 69, No. 5, May 2011, pp. 597–601.
Evaluating Ultraviolet Degradation in Cross-linked Polyethylene Storage Tanks Using Ultrasound, Don E. Bray and
Raed Al-Zubi, ME, Vol. 64, No. 3, March 2006, pp. 285-291.
Evaluation by On-Stream Radiography, Richard W. Spencer II, ME, Vol. 42, No. 8, July 1984, p. 977.
Evaluation of a Dry-Silver System for Weld Radiography, Michael J. Mayes and Dale W. Fitting, ME, Vol. 47, No.
2, February 1989, pp. 225–232.
Evaluation of a Racetrack Microtron for High-Energy Radiography, Roger A. Morris, J. Ronald London and F. Arthur
Hasenkamp, ME, Vol. 42, No. 1, January 1984, pp. 116–120.
Evaluation of a Resin-Ceramic Heat-Shield Material by Ultrasonic Techniques, George E. Lockyer, ME, Vol. 23, No.
3, March 1965, pp. 144–148.
Evaluation of a Reusable Phosphor X-Ray Detector, Gerald C. Langner, Jacobo P. Lucero and Matthew Laux, ME,
Vol. 53, No. 8, August 1995, pp. 930–935.
Evaluation of Acoustic Emission Signal Parameters for Identifying the Propagation of Discontinuities in
Pressurized Tubes, Romeu Ricardo da Silva, Domingo Mery and Sérgio Damasceno Soares, ME, Vol. 66, No. 5,
May 2008, pp. 493-500.
Evaluation of Carburization Depth in Service Exposed Ferritic Steel Using Magnetic Barkhausen Noise Analysis, S.
Vaidyanathan, V. Moorthy, T. Jayakumar and Baldav Raj, ME, Vol. 56, No. 3, March 1998, pp. 449–452.
Evaluation of Conductivity and Radius of Metallic Rods Based on Magnetic Field Analytical Model, Tech Paper,
Feng Jiang, Shulin Liu, and Hongbai Yang, ME, Vol. 78, No. 6, June 2020, pp. 729–739.
Evaluation of Digital X-Radiological Imaging Systems for US Air Force Applications, Thomas S. Jones, ME, Vol. 59,
No. 8, August 2001, pp. 971-975.
Evaluation of Echoes in Ultrasonic Testing by Deconvolution, Eberhard Nabel and Eberhard Mundry, ME, Vol. 36,
No. 1, January 1978, pp. 59–61, 77.
Evaluation of Eddy Current Inspection for Hot Sodium Bonding in Stainless Steel Clad Uranium Carbide Reactor
Fuel Elements, P.S. Vandervort, J.W. Morris and S.H. Fitch, ME, Vol. 23, No. 4, April 1965, pp. 196–199.
Evaluation of Electromagnetic Rope Testers: Joint Canadian/US Work, Lorant B. Geller, Dennis N. Poffenroth, John
E. Udd and Donald Hutchinson, ME, Vol. 50, No. 1, January 1992, pp. 56–63.
Evaluation of Film and Filmless Radiographic Systems for the Nondestructive Testing of Thin Materials and
Electronic Assemblies, James M. Baker, ME, Vol. 22, No. 1, January 1964, pp. 28–32.
Evaluation of Heat Damage to Aluminum Aircraft Structures, Donald J. Hagemaier, ME, Vol. 40, No. 9, August
1982, pp. 962–969.
Evaluation of High-Sensitivity, Water-Washable Fluorescent Penetrants, R.T. Fricker, ME, Vol. 30, No. 9,
September 1972, pp. 200–203.
Evaluation of Indications in Thread Roots by Use of Magnetic Rubber Inspection, David Wolf, Jerry Bednarski and
Tim Ries, ME, Vol. 44, No. 8, July 1986, p. 962.
Evaluation of Influence of Surface Roughness Orientation in CFRP Lap Joints using AE and DIC, Laxmikant S. Mane,
M.R. Bhat, ME, Vol. 81, No. 6, June 2023, https://doi.org/10.32548/2023.me-04326
Evaluation of Intrinsic Stresses of a Shape-Memory Alloy by Acoustic Emission, Rong S. Geng, ME, Vol. 44, No. 11,
October 1986, pp. 1340–1343.
Evaluation of Irradiated Fuel Rods with Pulsed Eddy Currents, R.R. Asamoto, R.F. Bacon, A.E. Conti and G.P.
Wozadlo, ME, Vol. 31, No. 4, April 1973, pp. 67–72.
Evaluation of Liquid Penetrant Systems, D.C. Nielson and J.G.H. Thomson, ME, Vol. 33, No. 12, December 1975,
pp. 284–292.
Evaluation of Magnetic Gradients for Magnetic Particle Testing, William C. Chedister, ME, Vol. 60, No. 9,
September 2002, pp. 1083-1088.
Evaluation of Magnetic Particle Inspection Oxides, Donald J. Hagemaier and Dennis L. Bowles, ME, Vol. 37, No.
11, October 1979, pp. 47–53.
Evaluation of Magnetic Particle Oxide Products, S.S. Aronson and V.J. Cusimano, ME, Vol. 33, No. 2, February
1975, pp. 37–40.
Evaluation of Mechanical Properties of 2014-T6 Weldments by Nondestructive (Eddy Current) Methods, Donald
J. Hagemaier and G.J. Basl, ME, Vol. 25, No. 1, January 1967, pp. 1–7.
Evaluation of NDE Techniques for Detecting Grout Defects in Cable Stays, Roger P. Bligh, Sreenivas Nakirekanti,
Donald E. Bray and Ray W. James, ME, Vol. 52, No. 4, April 1994, pp. 508–514.
Evaluation of NDT Techniques for Corrosion Detection and Quantification in Lap Joints, M.S. Safizadeh, D.S.
Forsyth, Z. Liu and A. Fahr, ME, Vol. 66, No. 5, May 2008, pp. 501-506.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 62
Evaluation of NDT Technologies for Organic Matrix Composite Testing, J. Steve Cargill, Joseph A. Pecina, Lawrence
Gintert and Donald Skelton, ME, Vol. 64, No. 9, September 2006, pp. 857-864.
Evaluation of Prestressed Concrete Beams based on Acoustic Emission Parameters, Jiangong Xu, Robert W.
Barnes and Paul H. Ziehl, ME, Vol. 71, No. 2, February 2013, pp. 176–185.
Evaluation of Shims, Gaussmeter, Penetrameter and Equations for Magnetic Particle Inspection, Donald
Hagemaier and John Petty, ME, Vol. 55, No. 5, May 1997, pp. 591–595.
Evaluation of Steel Ring Standards for Magnetic Particle Inspection, Bruce Bates, Donald J. Hagemaier, John Petty
and Chuck Armstrong, ME, Vol. 54, No. 10, October 1996, pp. 1207–1209.
Evaluation of Steel Ring Standards for Magnetic Particle Inspection, Donald J. Hagemaier, ME, Vol. 51, No. 9,
September 1993, pp. 1046–1051.
Evaluation of Stresses Generated by Welding in API 5L X65 Steel Using Acoustoelasticity, Auteliano A. Santos,
Marcilio Haddad Andrino, Don E. Bray and Roseana E. Trevisan, ME, Vol. 66, No. 8, August 2008, pp. 858-864.
Evaluation of the Effects of Preexposure in Marine Environments of Structural Glass Reinforced Composites by
Acoustic Emission Testing, G. Kotsikos, J.T. Evans, J.M. Hale and A.G. Gibson, ME, Vol. 58, No. 11, November
2000, pp. 1320-1325.
Evaluation of the Effects of Pulsed Magnetic Field Treatment as a Nondestructive Treatment for Magnetic
Materials, C.C.H. Lo, D.C. Jiles, M. Mina, M.J. Johnson, B. Koepke, L.C. Kerdus and J. Leib, ME, Vol. 60, No. 8,
August 2002, pp. 971-975.
Evaluation of the Polaroid Process for Industrial Radiography, James W. Dutli and James F. Torbert, NDT, Vol. 13,
No. 3, May-June 1955, pp. 23–26.
Evaluation of Three Different Approaches for the Ultrasound Attenuation Coefficient Measurement in Nodular
Cast Iron, Tech Paper, Mário João Santos and Jaime Batista Santos, ME, Vol. 77, No. 5, May 2019, pp. 605–612.
Evaluation of Tube-Film, Specimen-Film Alignment with Respect to Radiographic Distortion and Cut-Off, Robert
Taylor, IR, Vol. 1, No. 3, January 1943, pp. 24–27.
Evaluation of Ultrasonic Transducers by Cross-Sectional Mapping of the Near Field Using a Point Reflector, Tahir
M. Mansour, ME, Vol. 37, No. 7, June 1979, pp. 50–54.
Evaluation of Variables in the Measurements of Fuel Concentration Variations in Nuclear Fuel Rods, B.E. Foster
and S.D. Snyder, ME, Vol. 26, No. 2, February 1968, pp. 27–32.
Evaluation of Welding Residual Stress in a Nickel Alloy Pressure Vessel using the Ultrasonic Stress Measurement
Technique, Yashar Javadi and Seyed Hatef Mosteshary, ME, Vol. 73, No. 6, June 2015, pp. 862–868.
Evolution of an Automated Eddy Current Inspection System, Art Thompson, ME, Vol. 42, No. 12, November 1984,
pp. 1511–1514.
Evolution of an NDT Engineer—Model 1965, Carl E. Betz, ME, Vol. 24, No. 1, January 1966, pp. 39–42.
Evolution of an NDT Engineer—Model 1965, Carl E. Betz, ME, Vol. 39, No. 4, March 1981, pp. 371–373.
Evolution of Computed Tomography, John F. Moore, ME, Vol. 48, No. 5, May 1990, pp. 630–632, 634–638, 640.
Evolving Manufacturing Practices: Lessons for the Quality Control Engineer, Thomas W. Eagar, ME, Vol. 51, No.
10, October 1993, pp. 1184–1187.
Examining the Knuckle Region of Hanford’s Double Shell Waste Tanks, Allan F. Pardini, ME, Vol. 62, No. 11,
November 2004, pp. 1114-1120.
Examples of Ways to Evaluate Tolerances on Transducer Manufacturing Specifications, Frederick H.C. Hotchkiss,
Dana R. Patch and Matthew E. Stanton, ME, Vol. 45, No. 10, October 1987, pp. 1195–1202.
Excerpts from ‘A Technical Appreciation of the Sixth International Conference on Nondestructive Testing,’ R.S.
Sharpe, ME, Vol. 28, No. 8, August 1970, p. 18A.
Exhibitor’s Gallery: 2001 Fall Conference and Quality Testing Show, ME, Vol. 59, No. 10, October 2001, pp. 1135-
1174.
Exhibitor’s Gallery: 2002 Fall Conference and Quality Testing Show, ME, Vol. 60, No. 10, October 2002, pp. 1172-
1210.
Exhibitors Gallery 1997: Fall Quality Testing Show, ME, Vol. 55, No. 10, October 1997, pp. 1103–1133.
Exhibitors Gallery 1999, ME, Vol. 57, No. 10, October 1999, pp. 1007-1048.
Exhibitors Gallery, ME, Vol. 61, No. 10, October 2003, pp. 1087-1110.
Exhibitors Gallery, ME, Vol. 64, No. 10, October 2006, pp. 957-984.
Exhibitors Gallery: ME, Vol. 62, No. 10, October 2004, pp. 1002-1022.
Exhibitors Gallery: ME, Vol. 63, No. 10, October 2005, pp. 991-1014.
Exhibitors Gallery: ME, Vol. 65, No. 10, October 2007, pp. 983-1009.
Exhibitors Gallery: ME, Vol. 69, No. 10, October 2011, pp. 1157–1191.
Exhibitors Gallery: ME, Vol. 70, No. 10, October 2012, pp. 1155–1194.
Exhibitors Gallery: ME, Vol. 71, No. 10, October 2013, pp. 1145–1187.
Exhibitors Gallery: ME, Vol. 72, No. 10, October 2014, pp. 1211–1262.
Exhibitors Gallery: ME, Vol. 73, No. 10, October 2015, pp. 1291–1339.
Exhibitors Gallery: ME, Vol. 74, No. 10, October 2016, pp. 1381–1431.
Exhibitors Gallery: ME, Vol. 75, No. 10, October 2017, pp. 1225–1264.
Exhibitors Gallery: ME, Vol. 75, No. 3, March 2017, pp. 355–360.
Exhibitors Gallery: ME, Vol. 76, No. 10, October 2018, pp. 1311–1365.
Exhibitors Gallery: ME, Vol. 77, No. 10, October 2019, pp. 1181–1221.
Expanding Technology Adds Value to Testing, Visual and Remote Visual Inspection Procedures, Peter G. Lorenz,
ME, Vol. 55, No. 9, September 1997, pp. 1001–1004.
Expanding the Capability of a Laboratory Ultrasonic Testing Facility, M.W. Moyer and D.H. Gray, ME, Vol. 31, No.
10, October 1973, pp. 193–198, 204.
Expanding Use of Lasers in Nondestructive Testing, James Doyle, ME, Vol. 57, No. 4, April 1999, pp. 426-430.