Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 7
A Mechanized Eddy Current Scanning System for Aircraft Struts, C.R. Reeves, ME, Vol. 31, No. 3, March 1973, pp.
48–52.
A Message from the Section Operations Council Chair, Jocelyn Langlois, ME, Vol. 60, No. 12, December 2002, pp.
1397.
A Metals Comparator for the Inspection and Classification of Metals, B.M. Smith, NDT, Vol. 11, No. 2, Fall 1952,
pp. 41–46.
A Method for Comparison of Neutron Radiography Systems, J.P. Barton and M.F. Klozar, ME, Vol. 31, No. 9,
September 1973, pp. 169–178, 184.
A Method for Compiling an Accurate X-Ray Technique Chart, J.J. Allen, Jr., IR, Vol. 1, No. 4, April 1943, pp. 51–53.
A Method for Correlating Defects Detected by Nondestructive Tests With System Performance, R.W. Cribbs, ME,
Vol. 22, No. 10, October 1964, pp. 473–478.
A Method for Defect Discrimination in Automatic Multiple Transducer Inspection Systems, Walter A. Gunkel, ME,
Vol. 22, No. 2, February 1964, pp. 80–84.
A Method for Defect Segmentation in Digital Radiographs of Pipeline Girth Welds, Roger Hyatt, George E. Kechter
and Shingo Nagashima, ME, Vol. 54, No. 8, August 1996, pp. 925–928.
A Method for Non-Contact Thickness and Conductivity Gaging, E. Ball, ME, Vol. 33, No. 9, September 1975, pp.
54A, 57A.
A Method for Predicting the Response to Three-Dimensional Defects in Eddy Current NDE, Glen L. Hower, Robert
G. Olsen, Lee D. Philipp and James E. Staley, ME, Vol. 40, No. 13, December 1982, pp. 1362–1366.
A Method for Quantitative Characterization of Flaws in Sheets by Use of Thermal-Response Data, Terry V. Baughn
and David B. Johnson, ME, Vol. 44, No. 7, June 1986, pp. 850–858.
A Method for the Measurement of DC Magnetic Fields and DC Field Differences and Its Application to
Nondestructive Testing, Friedrich Foerster, NDT, Vol. 13, No. 5, Sep-Oct 1955, pp. 31–41, 59.
A Method for the Voltage Calibration of Industrial Radiographic Equipment, H. Bare, NDT, Vol. 20, No. 1, January-
February 1962, pp. 43–50.
A Method of Estimating Exposure Time, Donald T. O’Connor, IRNDT, Vol. 5, No. 2, Fall 1946, pp. 22–23.
A Methodology for Reflector Classification Analysis in Complex Geometric Welded Structures, Joseph L. Rose, Yi
H. Jeong, Ed Alloway and Cheryl T. Cooper, ME, Vol. 42, No. 1, January 1984, pp. 98–101, 106.
A Microwave Technique for the Detection of Voids in Honeycombed Ablative Materials, Murray Rockowitz and
Laurier McGuire, ME, Vol. 24, No. 2, February 1966, pp. 105–108.
A Miniature Calibration Block for Ultrasonic Inspection in the Field, Henry D. Rompas, ME, Vol. 24, No. 1, January
1966, pp. 27–29.
A Model for Ultrasonic Pipe Inspection, Joseph L. Rose and Jack W. Raisch, ME, Vol. 31, No. 12, December 1973,
pp. 255–264.
A Model of Metal Magnetic Memory Crack Testing on a Rectangular Parallelepiped, M. Jin, ME, Vol. 75, No. 11,
November 2017, pp. 1391–1398.
A Monte Carlo Simulation of Complete Systems for Radiographic Image Registration, W. Aerts, Paul J. De Meester
and Romain Bollen, ME, Vol. 40, No. 10, September 1982, pp. 1071–1075.
A Multi-Gaussian Ultrasonic Beam Model for High Performance Simulations on a Personal Computer, Lester W.
Schmerr Jr., ME, Vol. 58, No. 7, July 2000, pp. 882-888.
A Multiple-Echo Calibration Technique for Guided Wave Testing, Thomas Vogt, Brian Pavlakovic, Peter Cawley,
ME, 80 (6), June 2022: 32–43, https://doi.org/10.32548/2022.me-04255
A New Approach to Calibrating for Distance Amplitude Correction and Ultrasonic Inspection, John G. Rumbold
and Jerry L. Jackson, ME, Vol. 39, No. 5, April 1981, pp. 459–461 see also ME, Vol. 39, No. 11, October 1981,
p. 1010.
A New ASTM Standard for Remote Field Testing, David Mackintosh, Larry Cagle and Dave Russell, ME, Vol. 58,
No. 10, October 2000, pp. 1213-1215.
A New Capacitance Technique for Quality Control of Nonmetallic Materials and Structures, Imants G. Matiss, ME,
Vol. 40, No. 3, March 1982, pp. 299–304.
A New Cineradiographic System, W.P. Dyke and F.J. Grundhauser, ME, Vol. 23, No. 4, April 1965, pp. 177–179.
A New Concept in Immersion Ultrasonics, Albert P. Rogel and Donald K. Miller, ME, Vol. 26, No. 5, May 1968, pp.
83–89.
A New Detection Sensor for Wire Rope Based on Open Magnetization Method, Yanhua Sun, Shiwei Liu, Lingsong
He, and Yihua Kang, ME, Vol. 75, No. 4, April 2017, pp. 501–509.
A New Eddy Current Probe Using Uniform Rotating Eddy Currents, Hiroshi Hashikawa and Kiyoshi Koyama, ME,
Vol. 56, No. 1, January 1998, pp. 85–89.
A New Eddy Current Probe with Minimal Liftoff Noise and Phase Information on Discontinuity Depth, Hiroshi
Hoshikawa and Kiyoshi Koyama, ME, Vol. 61, No. 3, March 2003, pp. 423-427.
A New Eye for Industry, Edwin Laird Cady, IRNDT, Vol. 5, No. 2, Fall 1946, pp. 34–36.
A New Honor: ASNT Fellow, John P. Battema, ME, Vol. 31, No. 6, June 1973, pp. 14A–15A.
A New Liquid Penetrant Concept Not Requiring Photo Stimulation, F.D. Mullins and R.L. Crane, ME, Vol. 35, No.
4, April 1977, pp. 22, 24.
A New Magnetic Configuration for a Fast Electromagnetic Acoustic Transducer Applied to Online Steel Pipe Wall
Thickness Measurements, Jun Tu, Yihua Kang, and Yaoyao Liu, ME, Vol. 72, No. 1, November 2014, pp. 1407–
1413.
A New Method for Measuring Fluorescent Brightness and Color, J.T. Schmidt, ME, Vol. 24, No. 12, December
1966, pp. 697–702.
A New Method of Positioning Honeycomb Panels and Assemblies During Fluoroscopic and Radiographic
Examination, Harry E. Harris and Justin C. Schneeman, NDT, Vol. 17, No. 3, May-June 1959, pp. 152–155.

Materials Evaluation Subject Index
1942 to 2023
ME Subject Index 1942 to 2023 page 8
A New Method of Ultrasonic Wall Thickness Measurement: The Predef System, W. Kaule, K.E. Wetzlar and W.T.
Owens, ME, Vol. 32, No. 5, May 1974, pp. 103–108.
A New Nondestructive Test Tool: The Ultrasonic Micrometer, H.A.F. Rocha, NDT, Vol. 14, No. 6, November-
December 1956, pp. 32–34.
A New Paradigm for Nondestructive Testing, Thomas Meitzler, Samuel Ebenstein and Elena Bankowski, ME, Vol.
72, No. 9, September 2014, pp. 1138–1145.
A New Penetrant for Composite and Adhesively Bonded Structures, R.L. Crane, ME, Vol. 35, No. 2, February 1977,
pp. 54–55.
A New Rotating-Probe Eddy Current Method for Inspecting Bar Surface, J.P. Hoffman, ME, Vol. 33, No. 10, October
1975, pp. 237–242.
A New Stepped Wedge Design for Industrial Radiography, Herman E. Seemann and B. Roth, NDT, Vol. 20, No. 1,
January-February 1962, pp. 37–41.
A New Technique in Aircraft Radiography, G.R. Bailey, NDT, Vol. 19, No. 4, July-August 1961, pp. 274–275.
A New Technique Using Digital Speckle Correlation for Nondestructive Testing of Corrosion, Feng Jin and F.P.
Chiang, ME, Vol. 55, No. 7, July 1997, pp. 813–816.
A New Ultrasonic Imaging System, V.U. Schmitz, W. Müller and G. Schäfer, ME, Vol. 40, No. 1, January 1982, pp.
101–108.
A Nomogram for Calculating Intensity and Distance Relationships in Accordance with the Inverse Square Law,
William Steve Burkle and James O. Lightfoot, ME, Vol. 39, No. 9, August 1981, p. 796.
A Nomogram for Computing Geometrical Unsharpness in Industrial Radiographs, Herman E. Seeman, NDT, Vol.
7, No. 4, Spring 1949, pp. 12–15 Erratum, Vol. 8, No. 1, Summer 1949, p. 35.
A Nomogram for the Calculation of Snell’s Law, William Steve Burkle and F.L.C. Smith, ME, Vol. 39, No. 5, April
1981, p. 438.
A Nomograph to Calculate the Current Required for Longitudinal Magnetization, William Steve Burkle, ME, Vol.
46, No. 6, May 1988, pp. 728, 730.
A Nondestructive Measurement of Residual Bulk Stresses in Welded Steel Specimens by Use of Magnetically
Induced Velocity Changes for Ultrasonic Waves, Hegeon Kwun, ME, Vol. 44, No. 13, December 1986, pp. 1560–
1566.
A Nondestructive Method to Detect Pipes and Cavities in Hot Steel Blooms During the Rolling-Process by Means
of Betatron, X-Ray-Image-Intensifier and Television-Setup, Werner Lueckerath, Kurt Fink and Ronald
Flossmann, NDT, Vol. 18, No. 1, January-February 1960, pp. 27–34.
A Nondestructive Test to Detect Intergranular Surface Attack on Inconel-X Thrust Chamber Tubing, E.C. Santoro
and C.M. Johnson, ME, Vol. 24, No. 1, January 1966, pp. 30–38.
A Novel Acoustic Coupling Device Using Permeable Membrane, Charles F. Buynak and Robert L. Crane, ME, Vol.
45, No. 6, June 1987, pp. 743–746.
A Novel Damage Detection Technique Using Scanning Laser Vibrometry and a Strain Energy Distribution Method,
Shen-En Chen, Suhas Venkatappa, John Moody, Samer Petro and Hota GangaRao, ME, Vol. 58, No. 12,
December 2000, pp. 1389-1394.
A Novel Method for Distinguishing Discontinuities in Ferromagnetic Materials Based on Eddy Current Testing
Under Magnetization, Guangming Jia, Pengchao Chen, Rui Li, Kuan Fu, Rongbiao Wang, Kai Song, ME, Vol. 81,
No. 6, June 2023, https://doi.org/10.32548/2023.me-04284
A Novel Microwave Method for Surface Crack Detection Using Higher Order Waveguide Modes, Chin-Yung Yeh,
E. Ranu and Reza Zoughi, ME, Vol. 52, No. 6, June 1994, pp. 676–681.
A Novel Remote Field Eddy Current Technique for Inspection of Thick-Walled Aluminum Plates, Y.A. Sun, L. Udpa,
S. Udpa, W. Lord, S. Nath, S.K. Lua and K.H. Ng, ME, Vol. 56, No. 1, January 1998, pp. 94–97.
A Novel Ultrasonic Method for Characterizing Microstructural Gradients in Tubular Structures, Don J. Roth,
Dorothy V. Carney, George Y. Baaklini, James R. Bodis and Richard W. Rauser, ME, Vol. 56, No. 9, September
1998, pp. 1053–1061.
A Novel Ultrasonic Vibration Analysis Technique for Discontinuity Detection, Cody Borigo, Fei Yan, Yue Liang and
Joseph L. Rose, ME, Vol. 71, No. 10, October 2013, pp. 1242–1251.
A P/S Mode Transducer with a Piezoelectric Ceramic of PZT Type: Theory and Fabrication, B. Sung Kim, ME, Vol.
40, No. 2, February 1982, pp. 186–190, 197.
A Penetrating Look at the Army’s Arsenal, ME, Vol. 40, No. 10, September 1982, pp. 1020–1022.
A Personal Retrospective of NDT Experiences around the World, Mehl Honor Lecture Eugene R. Reinhart, ME,
Vol. 64, No. 4, April 2006, pp. 383-390.
A Perspective of The Needs and Opportunities for Coupling Materials Science and Nondestructive Evaluation for
Metals-Based Additive Manufacturing, MJ Quintana, Y Ji, PC Collins, ME, 80 (4), April 2022: 45–63,
https://doi.org/10.32548/2022.me-04256
A Phased Array Guided Wave Approach to Adhesive Bonding Structural Integrity Analysis, Zongqi Sun, Joseph L.
Rose and Masood Zaidi, ME, Vol. 61, No. 8, August 2003, pp. 941-946.
A Physically Modeled Feature-Based Ultrasonic System for IGSCC Classification, Joseph L. Rose, Michael J. Avioli,
Jr. and Mel Lapides, ME, Vol. 40, No. 13, December 1982, pp. 1367–1373.
A Place for Nondestructive Evaluation in the Maintenance of our Concrete Infrastructure, Allen G. Davis, ME, Vol.
55, No. 11, November 1997, pp. 1234–1238.
A Point Source Correlation Technique for Automatic Discontinuity Identification and Sizing Using Time of Flight
Diffraction, Gokul Swamy, G. Baskaran and Krishnan Balasubramaniam, ME, Vol. 63, No. 4, April 2005, pp. 425-
429.
A Portable Phase-Sensitive Eddy Current Instrument, Caius V. Dodd, ME, Vol. 26, No. 3, March 1968, pp. 33–36.
A Portable Ultrasonic Thickness Gage, Dwight J. Evans, NDT, Vol. 6, No. 4, Spring 1948, pp. 22–24, 42.