requirements. The tests involved include factory
test, acceptance test, site commissioning test,
and trial operation.
Ñ BSR/AWS B5.16-202x, Specification for
the Qualification of Welding Engineering
Personnel. This is a new standard that estab-
lishes the requirements for qualification of
welding engineering technologists and welding
engineers employed in the welding industry. It
defines the minimum experience, examination,
application, qualification, and requalification
requirements, and methods. This specification
is a method for engineering personnel to
establish a record of their qualification and
abilities in welding industry work, in the devel-
opment of procedures, process controls, quality
standards, problem solving, and so forth.
Ñ BSR/ASME B1.20.5-1991 (R202x), Gaging for
Dryseal Pipe Threads – Inch. This is a reaffirma-
tion of ANSI/ASME B1.20.5 -1991 (R2019). The
scope of this standard is to provide information
regarding practical dryseal thread inspection
methods and commonly used gauges for
production evaluation purposes.
ISO DRAFT
INTERNATIONAL
STANDARDS
The following are standards that the
International Organization for Standardization
(ISO) is considering for approval. The proposals
have received substantial support within the
technical committee that developed them
and are now being circulated to ISO members
for comment and vote. Readers interested in
reviewing or commenting on these standards
should order copies from ANSI.
Ñ ISO/IEC DIS 21471, Information technology
– Automatic identification and data capture
techniques – Extended rectangular data matrix
(DMRE) bar code symbology specification
Ñ ISO/DIS 15708-1, Non-destructive testing –
Radiation methods for computed tomography
– Part 1: Terminology
Ñ ISO/DIS 15708-2, Non-destructive testing –
Radiation methods for computed tomography
– Part 2: Principles, equipment and samples
Ñ ISO/DIS 15708-4, Non-destructive testing –
Radiation methods for computed tomography
– Part 4: Qualification
Ñ ISO/IEC DIS 29794-5, Information technology
– Biometric sample quality – Part 5: Face image
data
Ñ ISO/DIS 12219-12, Interior air of road vehicles
– Part 12: Artificial leather made from PVC or
Polyurethane – Specification and methods for
the determination of fogging characteristics of
trim materials in the interior of automobiles
Ñ ISO/DIS 15708-3, Non-destructive testing –
Radiation methods for computed tomography
– Part 3: Operation and interpretation
Ñ ISO/DIS 16831, Non-destructive testing
– Ultrasonic testing – Characterization and
verification of ultrasonic equipment for the
determination of thickness
Ñ ISO/IEC DIS 29158, Automatic identification
and data capture techniques – Bar code symbol
quality test specification – Direct Part Mark
(DPM)
Ñ ISO/DIS 19078, Gas cylinders – Inspection of
the cylinder installation, and requalification of
high-pressure cylinders for the on-board storage
of natural gas as a fuel for automotive vehicles
Ñ ISO/DIS 19828, Welding for aerospace applica-
tions – Visual inspection of welds
Ñ ISO/DIS 21009-1, Cryogenic vessels – Static
vacuum-insulated vessels – Part 1: Design, fabri-
cation, inspection and tests
SCANNER
|
STANDARDSUPDATE
WE WANT TO
HEAR FROM YOU!
At Work is a new feature in Materials
Evaluation that shines a spotlight
on the work that ASNT members
are doing every day to create a
safer world, from the research
lab to in-field inspections to the
executive C-suite. To nominate
someone to be profiled, please email
MEEditor@asnt.org. Note: Nominees
must be current members of ASNT
and actively involved in the NDT field.
JOIN THE
CONVERSATION
ASNT Connect is buzzing with conver-
sations. The newly launched online
community is a platform for ASNT
members, certificate holders, and
customers to connect, seek answers,
share expertise, and build valuable
connections. With ASNT Connect,
you can network, learn, and engage
in meaningful discussions about all
things nondestructive testing. Best of
all, this valuable member benefit is
completely free, allowing you to join
as many communities as you desire,
whenever you desire. Visit asnt.org
and click on ASNT Connect in the top
navigation menu to get started.
ASNT INDIA
EXPANDS
SERVICES
ASNT India is expanding its services
to cater to the needs of organi-
zations across Asia and the Gulf
Region. As a leading provider of
nondestructive testing training and
certification, we are committed to
providing comprehensive solutions
tailored to meet your needs,
including training and certification
and on-site training and examina-
tions. For any inquiries or to discuss
training and certification needs
further, call +91 8667286224 or
email dhanraj@asnt.org.
|
SOCIETYNOTES
20
M A T E R I A L S E V A L U A T I O N • J U L Y 2 0 2 4
test, acceptance test, site commissioning test,
and trial operation.
Ñ BSR/AWS B5.16-202x, Specification for
the Qualification of Welding Engineering
Personnel. This is a new standard that estab-
lishes the requirements for qualification of
welding engineering technologists and welding
engineers employed in the welding industry. It
defines the minimum experience, examination,
application, qualification, and requalification
requirements, and methods. This specification
is a method for engineering personnel to
establish a record of their qualification and
abilities in welding industry work, in the devel-
opment of procedures, process controls, quality
standards, problem solving, and so forth.
Ñ BSR/ASME B1.20.5-1991 (R202x), Gaging for
Dryseal Pipe Threads – Inch. This is a reaffirma-
tion of ANSI/ASME B1.20.5 -1991 (R2019). The
scope of this standard is to provide information
regarding practical dryseal thread inspection
methods and commonly used gauges for
production evaluation purposes.
ISO DRAFT
INTERNATIONAL
STANDARDS
The following are standards that the
International Organization for Standardization
(ISO) is considering for approval. The proposals
have received substantial support within the
technical committee that developed them
and are now being circulated to ISO members
for comment and vote. Readers interested in
reviewing or commenting on these standards
should order copies from ANSI.
Ñ ISO/IEC DIS 21471, Information technology
– Automatic identification and data capture
techniques – Extended rectangular data matrix
(DMRE) bar code symbology specification
Ñ ISO/DIS 15708-1, Non-destructive testing –
Radiation methods for computed tomography
– Part 1: Terminology
Ñ ISO/DIS 15708-2, Non-destructive testing –
Radiation methods for computed tomography
– Part 2: Principles, equipment and samples
Ñ ISO/DIS 15708-4, Non-destructive testing –
Radiation methods for computed tomography
– Part 4: Qualification
Ñ ISO/IEC DIS 29794-5, Information technology
– Biometric sample quality – Part 5: Face image
data
Ñ ISO/DIS 12219-12, Interior air of road vehicles
– Part 12: Artificial leather made from PVC or
Polyurethane – Specification and methods for
the determination of fogging characteristics of
trim materials in the interior of automobiles
Ñ ISO/DIS 15708-3, Non-destructive testing –
Radiation methods for computed tomography
– Part 3: Operation and interpretation
Ñ ISO/DIS 16831, Non-destructive testing
– Ultrasonic testing – Characterization and
verification of ultrasonic equipment for the
determination of thickness
Ñ ISO/IEC DIS 29158, Automatic identification
and data capture techniques – Bar code symbol
quality test specification – Direct Part Mark
(DPM)
Ñ ISO/DIS 19078, Gas cylinders – Inspection of
the cylinder installation, and requalification of
high-pressure cylinders for the on-board storage
of natural gas as a fuel for automotive vehicles
Ñ ISO/DIS 19828, Welding for aerospace applica-
tions – Visual inspection of welds
Ñ ISO/DIS 21009-1, Cryogenic vessels – Static
vacuum-insulated vessels – Part 1: Design, fabri-
cation, inspection and tests
SCANNER
|
STANDARDSUPDATE
WE WANT TO
HEAR FROM YOU!
At Work is a new feature in Materials
Evaluation that shines a spotlight
on the work that ASNT members
are doing every day to create a
safer world, from the research
lab to in-field inspections to the
executive C-suite. To nominate
someone to be profiled, please email
MEEditor@asnt.org. Note: Nominees
must be current members of ASNT
and actively involved in the NDT field.
JOIN THE
CONVERSATION
ASNT Connect is buzzing with conver-
sations. The newly launched online
community is a platform for ASNT
members, certificate holders, and
customers to connect, seek answers,
share expertise, and build valuable
connections. With ASNT Connect,
you can network, learn, and engage
in meaningful discussions about all
things nondestructive testing. Best of
all, this valuable member benefit is
completely free, allowing you to join
as many communities as you desire,
whenever you desire. Visit asnt.org
and click on ASNT Connect in the top
navigation menu to get started.
ASNT INDIA
EXPANDS
SERVICES
ASNT India is expanding its services
to cater to the needs of organi-
zations across Asia and the Gulf
Region. As a leading provider of
nondestructive testing training and
certification, we are committed to
providing comprehensive solutions
tailored to meet your needs,
including training and certification
and on-site training and examina-
tions. For any inquiries or to discuss
training and certification needs
further, call +91 8667286224 or
email dhanraj@asnt.org.
|
SOCIETYNOTES
20
M A T E R I A L S E V A L U A T I O N • J U L Y 2 0 2 4
