King, W.E., H.D. Barth, V.M. Castillo, G.F. Gallegos, J.W. Gibbs, D.E. Hahn, C. Kamath, and A.M. Rubenchik, , “Observation of Keyhole-Mode Laser Melting in Laser Powder-Bed fusion Additive Manufacturing,” J. Mater. Process. Technol., Vol. , No. , pp. –, https: //doi.org/./j.jmatprotec... Kobryn, P.A., N.R. Ontko, L.P. Perkins, and J.S. Tiley, , “Additive Manu- facturing of Aerospace Alloys for Aircraft Structures,” Cost Effective Manu- facture via Net-Shape Processing Meeting Proceedings, RTO-MP-AVT-, Paper , https://apps.dtic.mil/sti/pdfs/ADA.pdf Kodama, H., , “Automatic Method for Fabricating a Three-Dimensional Plastic Model with Photo-Hardening Polymer,” Rev. Sci. Instrum., Vol. , https://doi.org/ ./. Koester, L., H. Taheri, T. Bigelow, and L. Bond, , “Nondestructive Testing for Metal Parts Fabricated Using Powder Based Additive Manufac- turing,” Materials Evaluation, Vol. , No. , pp. – Kumar, A., and K. Maji, , “Selection of Process Parameters for Near-Net Shape Deposition in Wire Arc Additive Manufacturing by Genetic Algorithm,” J. Mater. Eng. Perform., Vol. , pp. –, https://doi .org/./s--- Kumar, S., S.R. Vijayan, P. Nandwana, J.D. Poplawsky, C. Yan, and S.S. Babu, , “Role of Thermo-Mechanical Gyrations on the α/β Interface Stability in a TiAlV AM Alloy,” Scr. Mater., Vol. , https://doi .org/./j.scriptamat.. Kumara, C., A.R. Balachandramurthi, S. Goel, F. Hanning, and J. Moverare, , “Toward a Better Understanding of Phase Transformations in Additive Manufacturing of Alloy ,” Materialia, Vol. , https://doi .org/./j.mtla.. Kunze, K., T. Etter, J. Grässlin, and V. Shklover, , “Texture, Anisotropy in Microstructure and Mechanical Properties of INLC Alloy Processed by Selective Laser Melting (SLM),” Mater. Sci. Eng.: A., Vol. , pp. –, https://doi.org/https://doi.org/./j.msea... Laleh, M., A.E. Hughes, W. Xu, N. Haghdadi, K. Wang, P. Cizek, I. Gibson, and M.Y. Tan, , “On the Unusual Intergranular Corrosion Resistance of L Stainless Steel Additively Manufactured by Selective Laser Melting,” Corros. Sci., Vol. , https://doi.org/./j.corsci.. Lévesque, D., C. Bescond, M. Lord, X. Cao, P. Wanjara, and J.-P. Monchalin, , “Inspection of Additive Manufactured Parts using Laser Ultrasonics,” AIP Conf. Proc., Vol. , https://doi.org/./. Li, Y., Z. Feng, L. Hao, L. Huang, C. Xin, Y. Wang, E. Bilotti, K. Essa, H. Zhang, Z. Li, F. Yan, and T. Peijs, , “A Review on Functionally Graded Materials and Structures via Additive Manufacturing: From Multi-Scale Design to Versatile Functional Properties,” Adv. Mater. Technol., Vol. , No. , https://doi.org/./admt. Lim, S., R.A. Buswell, T.T. Le, S.A. Austin, A.G.F. Gibb, and T. Thorpe, , “Developments in Construction-Scale Additive Manufacturing Processes,” Autom. Constr., Vol. , pp. –, https://doi.org/. /j.autcon... Liu, J., A.T. Gaynor, S. Chen, Z. Kang, K. Suresh, A. Takezawa, L. Li, J. Kato, J. Tang, C.C.L. Wang, L. Cheng, X. Liang, and A.C. To, , “Current and Future Trends in Topology Optimization for Additive Manufacturing,” Struct. Multidiscip. Optim., Vol. , pp. –, https://doi.org/./ s--- Liu, J., R.L. Davidchack, and H.B. Dong, , “Molecular Dynamics Calcu- lation of Solid-Liquid Interfacial Free Energy and Its Anisotropy during Iron Solidification,” Comput. Mater. Sci., Vol. , pp. –, https://doi .org/./j.commatsci... Love, L.J., B. Richardson, R. Lind, R. Dehoff, B. Peter, and C. Blue, , “Free Form Fluidics,” Mechanical Engineering, Vol. , No. , pp. –, https://doi.org/./.-JUN- Lu, Q.Y., N.V. Nguyen, A.J.W. Hum, T. Tran, and C.H. Wong, , “Optical In-Situ Monitoring and Correlation of Density and Mechanical Properties of Stainless Steel Parts Produced by Selective Laser Melting Process Based on Varied Energy Density,” J. Mater. Process. Technol., Vol. , pp. –, https://doi.org/./j.jmatprotec... Madireddy, G., C. Li, J. Liu, and M.P. Sealy, , “Modeling Thermal and Mechanical Cancellation of Residual Stress from Hybrid Additive Manufacturing by Laser Peening,” Nanotechnology and Precis. Eng., Vol. , pp. –, https://doi.org/./j.npe... Mandache, C., , “Overview of Non-destructive Evaluation Techniques for Metal-based Additive Manufacturing,” Mater. Sci. Technol., Vol. , pp. –, https://doi.org/./.. Marini, D., and J.R. Corney, , “Process Selection Methodology for Near Net Shape Manufacturing,” International Journal of Advanced Manufac- turing Technology, Vol. , pp. –, https://doi.org/./s ---w Martin, A.A., N.P. Calta, S.A. Khairallah, J. Wang, P.J. Depond, A.Y. Fong, V. Thampy, G.M. Guss, A.M. Kiss, K.H. Stone, C.J. Tassone, J. Nelson Weker, M.F. Toney, T. van Buuren, and M.J. Matthews, , “Dynamics of Pore Formation during Laser Powder Bed Fusion Additive Manufacturing,” Nat. Commun., Vol. , pp. –, https://doi.org/./s-- - Matthews, M.J., G. Guss, S.A. Khairallah, A.M. Rubenchik, P.J. Depond, and W.E. King, , “Denudation of Metal Powder Layers in Laser Powder Bed Fusion Processes,” Acta Mater., Vol. , pp. –, https://doi .org/./j.actamat... McNeil, J.L., K. Sisco, C. Frederick, M. Massey, K. Carver, F. List, C. Qiu, M. Mader, S. Sundarraj, and S.S. Babu, , “In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing,” Metall. Mater. Trans. A, Vol. , pp. –, https://doi.org/./s--- Menasche, D.B., W.D. Musinski, M. Obstalecki, M.N. Shah, S.P. Donegan, J.V. Bernier, P. Kenesei, J.-S. Park, and P.A. Shade, , “AFRL Additive Manufacturing Modeling Series: Challenge , In Situ Mechanical Test of an IN Sample with Concurrent High-Energy Diffraction Microscopy Char- acterization,” Integr. Mater. Manuf. Innov., Vol. , pp. –, https: //doi.org/https://doi.org/./s--- Meng, L., W. Zhang, D. Quan, G. Shi, L. Tang, Y. Hou, P. Breitkopf, J. Zhu, and T. Gao, , “From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap,” Archives of Computational Methods in Engineering, Vol. , pp. –, https: //doi.org/./s--- Mercelis, P., and J.P. Kruth, , “Residual Stresses in Selective Laser Sintering and Selective Laser Melting,” Rapid Prototyping Journal, Vol. , No. , pp. –, https://doi.org/./ Michaleris, P., , “Modeling Metal Deposition in Heat Transfer Analyses of Additive Manufacturing Processes,” Finite Elem. Anal. Des., Vol. , pp. –, https://doi.org/./j.finel... Morris, L., and W. Winegard, , “Segregation and Morphology of Cells during Freezing,” J. Inst. Met., Vol. , pp. – Mullins, W.W., , “Theory of Thermal Grooving,” J. Appl. Phys., Vol. , No. , https://doi.org/./. Mullins, W.W., , “The Effect of Thermal Grooving on Grain Boundary Motion,” Acta Metall., Vol. , No. , pp. –, https: //doi.org/./-()- Nanekar, P.P., and B.K. Shah, , “Characterization of Material Proper- ties by Ultrasonics,” BARC Newsletter, Vol. , pp. – Niendorf, T., S. Leuders, A. Riemer, H.A. Richard, T. Tröster, and D. Schwarze, , “Highly Anisotropic Steel Processed by Selective Laser Melting,” Metall. Mater. Trans. B, Vol. , pp. –, https://doi .org/./s---z Obielodan, J., and B. Stucker, , “Characterization of LENS-Fabricated TiAlV and TiAlV/TiC Dual-Material Transition Joints,” Int. J. Adv. Manuf. Technol., Vol. , pp. –, https://doi.org/./s --- Petrov, P., C. Georgiev, and G. Petrov, , “Experimental Investigation of Weld Pool Formation in Electron Beam Welding,” Vacuum, Vol. , No. , pp. –, https://doi.org/./S-X()- A P R I L 2 0 2 2 • M A T E R I A L S E V A L U A T I O N 61

Pieris, D., T. Stratoudaki, Y. Javadi, P. Lukacs, S. Catchpole-Smith, P.D. Wilcox, A. Clare, and M. Clark, , “Laser Induced Phased Arrays (LIPA) to Detect Nested Features in Additively Manufactured Components,” Mater. & Des., Vol. , https://doi.org/./j.matdes.. Pogson, S., P. Fox, W. O’Neill, and C.J. Sutcliffe, , “The Direct Metal Laser Remelting of Copper and Tool Steel Powders,” Mater. Sci. Eng.: A, Vol. , pp. –, https://doi.org/./j.msea... Polonsky, A.T., N. Raghavan, M.L.P. Echlin, M.M. Kirka, R.R. Dehoff, and T.M. Pollock, , “D Characterization of the Columnar-to-Equiaxed Transition in Additively Manufactured Inconel ,” Superalloys , pp. –, https://doi.org/./----_ Qiu, C., G.A. Ravi, and M.M. Attallah, , “Microstructural Control during Direct Laser Deposition of a β-Titanium Alloy,” Mater. & Des., Vol. , pp. –, https://doi.org/https://doi.org/./j. matdes... Quintana, M.J., K. O’Donnell, M.J. Kenney, and P.C. Collins, , “Differ- ences in Defect Distribution across Scan Strategies in Electron Beam AM Ti-Al-V,” Adv. Mater. Process., Vol. , No. , pp. – Quintana, M.J., M.J. Kenney, P. Agrawal, and P.C. Collins, , “Texture Analysis of Additively Manufactured Ti-Al-V Deposited Using Different Scanning Strategies,” Metall. Mater. Trans. A, Vol. , pp. –, https://doi.org/./s--- Raghavan, A., H.L. Wei, T.A. Palmer, and T. DebRoy, , “Heat Transfer and Fluid Flow in Additive Manufacturing,” J. Laser Appl., Vol. , No. , https://doi.org/./. Repossini, G., V. Laguzza, M. Grasso, and B.M. Colosimo, , “On the Use of Spatter Signature for In-Situ Monitoring of Laser Powder Bed Fusion,” Addit. Manuf., Vol. , pp. –, https://doi.org/./j.addma ... Riveiro, A., J. del Val, R. Comesaña, F. Lusquiños, F. Quintero, M. Boutin- guiza, and J. Pou, , “Laser Additive Manufacturing Processes for Near Net Shape Components,” in Near Net Shape Manufacturing Processes, pp. –, https://doi.org/./----_ Roberts, I.A., C.J. Wang, R. Esterlein, M. Stanford, and D.J. Mynors, , “A Three-Dimensional Finite Element Analysis of the Temperature Field during Laser Melting of Metal Powders in Additive Layer Manufacturing,” Int. J. Mach. Tools & Manuf., Vol. , pp. –, https://doi.org/. /j.ijmachtools... Sato, Y., and T. Kuwana, , “Oxygen Absorption in Iron and Steel Weld Metal,” ISIJ International, Vol. , No. , pp. – Saville, A.I., S.C. Vogel, A. Creuziger, J.T. Benzing, A.L. Pilchak, P. Nandwana, J. Klemm-Toole, K.D. Clarke, S.L. Semiatin, and A.J. Clarke, , “Texture Evolution as a Function of Scan Strategy and Build Height in Electron Beam Melted Ti-Al-V,” Addit. Manuf., Vol. , https://doi .org/./j.addma.. Schwartz, J.J., and A.J. Boydston, , “Multimaterial Actinic Spatial Control D and D Printing,” Nature Communications, Vol. , https: //doi.org/./s--- Schwendner, K.I., R. Banerjee, P.C. Collins, C.A. Brice, and H.L. Fraser, , “Direct Laser Deposition of Alloys from Elemental Powder Blends,” Scr. Mater., Vol. , No. , pp. –, https://doi.org/./S -()- Semiatin, S.L., V.G. Ivanchenko, S. V. Akhonin, and O.M. Ivasishin, , “Diffusion Models for Evaporation Losses during Electron-Beam Melting of Alpha/Beta-Titanium Alloys,” Metall. Mater. Trans. B, Vol. , pp. –, https://doi.org/./s--- Shao, M., S. Vijayan, P. Nandwana, and J.R. Jinschek, , “The Effect of Beam Scan Strategies on Microstructural Variations in Ti-Al-V Fabri- cated by Electron Beam Powder Bed Fusion,” Mater. & Des., Vol. , https://doi.org/./j.matdes.. Sharratt, B.M., , “Non-destructive Techniques and Technologies for Qualification of Additive Manufactured Parts and Processes: A Literature Review,” Sharratt Res. Consult. Inc., Victoria, BC, Contract Rep. No. DRDC- RDDC--C Slotwinski, J.A., E.J. Garboczi, and K.M. Hebenstreit, , “Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control,” J. Res. Natl. Inst. Stand. Technol., Vol. , p. – Smith, J., W. Xiong, W. Yan, S. Lin, P. Cheng, O.L. Kafka, G.J. Wagner, J. Cao, and W.K. Liu, a, “Linking Process, Structure, Property, and Performance for Metal-based Additive Manufacturing: Computa- tional Approaches with Experimental Support,” Comput. Mech., Vol. , pp. –, https://doi.org/./s--- Smith, R.J., M. Hirsch, R. Patel, W. Li, A.T. Clare, and S.D. Sharples, b, “Spatially Resolved Acoustic Spectroscopy for Selective Laser Melting,” J. Mater. Process. Technol., Vol. , pp. –, https://doi.org/. /j.jmatprotec... Smith, R.J., W. Li, J. Coulson, M. Clark, M.G. Somekh, and S.D. Sharples, , “Spatially Resolved Acoustic Spectroscopy for Rapid Imaging of Material Microstructure and Grain Orientation,” Meas. Sci. Technol., Vol. , No. ,  Sochalski-Kolbus, L.M., E.A. Payzant, P.A. Cornwell, T.R. Watkins, S.S. Babu, R.R. Dehoff, M. Lorenz, O. Ovchinnikova, and C. Duty, , “Comparison of Residual Stresses in Inconel  Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering,” Metall. Mater. Trans. A, Vol. , pp. –, https://doi.org/./s--- Song, J.Y., S. Sato, Y. Koizumi, and A. Chiba, , “Effect of Cobalt Addition on the Deformation and Recrystallization Textures of Poly- crystalline INC Nickel Based Superalloy,” Adv. Mater. Res., Vol. , pp. –, https://doi.org/./www.scientific.net/AMR.. Sotelo, L.D., H. Hadidi, C.S. Pratt, M.P. Sealy, and J.A. Turner, , “Ultrasonic Mapping of Hybrid Additively Manufactured  Stainless Steel” , Ultrasonics, Vol. , https://doi.org/./j.ultras.. Stephenson, P.L., N. Haghdadi, R. DeMott, X.Z. Liao, S.P. Ringer, and S. Primig, , “Effect of Scanning Strategy on Variant Selection in Additively Manufactured Ti-Al-V,” Addit. Manuf., Vol. , https://doi .org/./j.addma.. Sun, S.H., Y. Koizumi, S. Kurosu, Y.P. Li, H. Matsumoto, and A. Chiba, , “Build Direction Dependence of Microstructure and High-Temperature Tensile Property of Co-Cr-Mo Alloy Fabricated by Electron Beam Melting,” Acta Mater., Vol. , pp. – https://doi.org/. /j.actamat... Taheri, H., M.R.B.M. Shoaib, L.W. Koester, T.A. Bigelow, P.C. Collins, and L.J. Bond, , “Powder-based Additive Manufacturing – A Review of Types of Defects, Generation Mechanisms, Detection, Property Evaluation and Metrology,” Int. J. Addit. Subtractive Mater. Manuf., Vol. , No. , pp. – Tammas-Williams, S., and I. Todd, , “Design for Additive Manufac- turing with Site-Specific Properties in Metals and Alloys,” Scr. Mater., Vol. , pp. –, https://doi.org/./j.scriptamat... Tammas-Williams, S., H. Zhao, F. Léonard, F. Derguti, I. Todd, P.B. Prang- nell, , “XCT Analysis of the Influence of Melt Strategies on Defect Population in Ti-Al-V Components Manufactured by Selective Electron Beam Melting,” Mater. Charact., Vol. , pp. –, https: //doi.org/./j.matchar... Tang, H.P., G.Y. Yang, W.P. Jia, W.W. He, S.L. Lu, and M. Qian, , “Additive Manufacturing of a High Niobium-Containing Titanium Aluminide Alloy by Selective Electron Beam Melting,” Mater. Sci. Eng. A., Vol. , pp. –, https://doi.org/./j.msea... Tao, W., and M.C. Leu, , “Design of Lattice Structure for Additive Manufacturing,” International Symposium on Flexible Automation, – August, Cleveland, OH, pp. – Todorov, E., P. Boulware, and K. Gaah, , “Demonstration of Array Eddy Current Technology for Real-Time Monitoring of Laser Powder Bed Fusion Additive Manufacturing Process,” Proceedings Vol. , Nondestruct. Charact. Monit. Adv. Mater. Aerospace, Civ. Infrastructure, and Transp. XII, International Society for Optics and Photonics, https://doi.org /./. ME | AMNDEOVERVIEW 62 M A T E R I A L S E V A L U A T I O N • A P R I L 2 0 2 2