and adapters of quarter-turn actuators and
valves. This document is being recirculated for
review of revisions marked in the draft.
Ñ BSR/NFPA 34-202x, Standard for Dipping,
Coating, and Printing Processes Using
Flammable or Combustible Liquids. This
revision of ANSI/NFPA 34-2024 applies to
dipping, roll coating, flow coating, curtain
coating, printing, cleaning, and similar
processes, hereinafter referred to as “coating
processes” or “processes,” in which articles or
materials are passed through tanks, vats, or
containers or passed over rollers, drums, or
other process equipment that contain ignitible
(flammable or combustible) liquids. This
standard also applies to cleaning processes that
utilize a solvent vapor, such as vapor degreasing
processes. This standard additionally applies to
processes that use waterborne, water-based, and
water-reducible materials that contain ignitible
(flammable or combustible) liquids or that
produce combustible deposits or residues.
Ñ BSR/NFPA 37-202x, Standard for the
Installation and Use of Stationary Combustion
Engines and Gas Turbines. This revision of ANSI/
NFPA 37-2024 establishes criteria for mini-
mizing the hazards of fire during the installation
and operation of stationary combustion engines
and gas turbines.
Ñ BSR/NFPA 70B-202x, Recommended Practice
for Electrical Equipment Maintenance .This
revision of ANSI/NFPA 70B-2019 applies to
preventive maintenance for electrical, electronic,
and communication systems and equipment
and is not intended to duplicate or supersede
instructions that manufacturers normally
provide. Systems and equipment covered are
typical of those installed in industrial plants,
institutional and commercial buildings, and
large multifamily residential complexes.
Ñ BSR/NFPA 408-202x, Standard for Aircraft
Hand Portable Fire Extinguishers. This revision
of ANSI/NFPA 408-2022 specifies require-
ments for the type, capacity, rating, number,
location, installation, and maintenance of
aircraft hand-portable fire extinguishers to be
provided for the use of flight crew members
or other occupants of an aircraft for the control
of incipient fires in the areas of aircraft that
are accessible during flight. This standard also
includes requirements for training flight crew
members in the use of these extinguishers. This
standard does not cover fire detection and fixed
fire-extinguishing systems installed in an aircraft
or fire detection and fire-extinguishing systems
for the protection of ground maintenance
operations.
Ñ BSR/NFPA 409-202x, Standard on Aircraft
Hangers. This revision of ANSI/NFPA 409-2022
contains the minimum requirements for the
proper construction of aircraft hangars and
protection of aircraft hangars from fire. This
standard applies only to buildings or structures
used for aircraft storage, maintenance, or related
activities, including aircraft hangers that use
liquid hydrocarbon fuels. Other uses within an
aircraft hangar shall be protected in accordance
with other applicable NFPA standards. The
purpose of this standard is to provide a reason-
able degree of protection from fire for life and
property in aircraft hangars, based on sound
engineering principles, test data, and field
experience.
Ñ BSR/NFPA 915-202x, Standard for Remote
Inspections and Tests. This revision of ANSI/
NFPA 915-2024 provides the minimum require-
ments for the procedures, methods, trans-
mission, data collection, and documentation
associated with remote inspections and tests,
automated inspection and testing, and distance
monitoring performed in accordance with other
governing laws, codes, and standards.
Ñ BSR/SAIA A92.24-2018 (R202x), Training
Requirements for the Use, Operation,
Inspection, Testing, and Maintenance of
Mobile Elevating Work Platforms (MEWPs).
This reaffirmation of ANSI/SAIA A92.24-2018
provides methods and guidelines to prepare
MEWP training materials, defines administrative
criteria, and delivers elements required for
proper training and familiarization.
ISO DRAFT
INTERNATIONAL
STANDARDS
The following are standards that the
International Organization for Standardization
(ISO) is considering for approval. The proposals
have received substantial support within the
technical committee that developed them
and are now being circulated to ISO members
for comment and vote. Readers interested in
reviewing or commenting on these standards
should order copies from ANSI.
Ñ ISO/DIS 4653, Ferronickel – Determination of
carbon, sulphur, silicon, phosphorus, nickel,
cobalt, chromium, and copper contents by Spark
Emission Spectrometry
Ñ ISO/DIS 17501, Nondestructive testing –
Thermographic testing – Active thermography
with laser excitation
Ñ ISO/DIS 19078.2, Gas cylinders – Inspection of
the cylinder installation, and requalification of
high-pressure cylinders for the on-board storage
of natural gas as a fuel for automotive vehicles
Ñ ISO/DIS 22241-1, Diesel engines – NOx
reduction agent AUS 32 – Part 1: Quality
requirements
Ñ ISO/DIS 25116-3, Friction stir welding – Steel –
Part 3: Quality and inspection requirements
Ñ ISO/DIS 25335, Nondestructive testing –
Thermographic testing – Mechanical and elec-
trical equipment testing
Ñ ISO/IEC DIS 42105, Information technology
– Artificial intelligence – Guidance for human
oversight of AI systems
SCANNER
|
STANDARDSUPDATE
DEADLINE ALERT:
31 JANUARY 2026
The ASNT Foundation offers financial
assistance and recognition to indi-
viduals seeking nondestructive
testing (NDT) training, as well
as undergraduate and graduate
students and faculty members of
universities and colleges. Discover
a range of opportunities tailored
to your educational pursuits. The
scholarships, grants, and fellow-
ships are available to candidates
worldwide and have their own
eligibility criteria that must be met
in order to be considered. Visit
foundation.asnt.org to learn more
about the eligibility criteria and to
apply.
|
ASNTFOUNDATION
24
M AT E R I A L S E V A L U AT I O N • J A N U A R Y 2 0 2 6
valves. This document is being recirculated for
review of revisions marked in the draft.
Ñ BSR/NFPA 34-202x, Standard for Dipping,
Coating, and Printing Processes Using
Flammable or Combustible Liquids. This
revision of ANSI/NFPA 34-2024 applies to
dipping, roll coating, flow coating, curtain
coating, printing, cleaning, and similar
processes, hereinafter referred to as “coating
processes” or “processes,” in which articles or
materials are passed through tanks, vats, or
containers or passed over rollers, drums, or
other process equipment that contain ignitible
(flammable or combustible) liquids. This
standard also applies to cleaning processes that
utilize a solvent vapor, such as vapor degreasing
processes. This standard additionally applies to
processes that use waterborne, water-based, and
water-reducible materials that contain ignitible
(flammable or combustible) liquids or that
produce combustible deposits or residues.
Ñ BSR/NFPA 37-202x, Standard for the
Installation and Use of Stationary Combustion
Engines and Gas Turbines. This revision of ANSI/
NFPA 37-2024 establishes criteria for mini-
mizing the hazards of fire during the installation
and operation of stationary combustion engines
and gas turbines.
Ñ BSR/NFPA 70B-202x, Recommended Practice
for Electrical Equipment Maintenance .This
revision of ANSI/NFPA 70B-2019 applies to
preventive maintenance for electrical, electronic,
and communication systems and equipment
and is not intended to duplicate or supersede
instructions that manufacturers normally
provide. Systems and equipment covered are
typical of those installed in industrial plants,
institutional and commercial buildings, and
large multifamily residential complexes.
Ñ BSR/NFPA 408-202x, Standard for Aircraft
Hand Portable Fire Extinguishers. This revision
of ANSI/NFPA 408-2022 specifies require-
ments for the type, capacity, rating, number,
location, installation, and maintenance of
aircraft hand-portable fire extinguishers to be
provided for the use of flight crew members
or other occupants of an aircraft for the control
of incipient fires in the areas of aircraft that
are accessible during flight. This standard also
includes requirements for training flight crew
members in the use of these extinguishers. This
standard does not cover fire detection and fixed
fire-extinguishing systems installed in an aircraft
or fire detection and fire-extinguishing systems
for the protection of ground maintenance
operations.
Ñ BSR/NFPA 409-202x, Standard on Aircraft
Hangers. This revision of ANSI/NFPA 409-2022
contains the minimum requirements for the
proper construction of aircraft hangars and
protection of aircraft hangars from fire. This
standard applies only to buildings or structures
used for aircraft storage, maintenance, or related
activities, including aircraft hangers that use
liquid hydrocarbon fuels. Other uses within an
aircraft hangar shall be protected in accordance
with other applicable NFPA standards. The
purpose of this standard is to provide a reason-
able degree of protection from fire for life and
property in aircraft hangars, based on sound
engineering principles, test data, and field
experience.
Ñ BSR/NFPA 915-202x, Standard for Remote
Inspections and Tests. This revision of ANSI/
NFPA 915-2024 provides the minimum require-
ments for the procedures, methods, trans-
mission, data collection, and documentation
associated with remote inspections and tests,
automated inspection and testing, and distance
monitoring performed in accordance with other
governing laws, codes, and standards.
Ñ BSR/SAIA A92.24-2018 (R202x), Training
Requirements for the Use, Operation,
Inspection, Testing, and Maintenance of
Mobile Elevating Work Platforms (MEWPs).
This reaffirmation of ANSI/SAIA A92.24-2018
provides methods and guidelines to prepare
MEWP training materials, defines administrative
criteria, and delivers elements required for
proper training and familiarization.
ISO DRAFT
INTERNATIONAL
STANDARDS
The following are standards that the
International Organization for Standardization
(ISO) is considering for approval. The proposals
have received substantial support within the
technical committee that developed them
and are now being circulated to ISO members
for comment and vote. Readers interested in
reviewing or commenting on these standards
should order copies from ANSI.
Ñ ISO/DIS 4653, Ferronickel – Determination of
carbon, sulphur, silicon, phosphorus, nickel,
cobalt, chromium, and copper contents by Spark
Emission Spectrometry
Ñ ISO/DIS 17501, Nondestructive testing –
Thermographic testing – Active thermography
with laser excitation
Ñ ISO/DIS 19078.2, Gas cylinders – Inspection of
the cylinder installation, and requalification of
high-pressure cylinders for the on-board storage
of natural gas as a fuel for automotive vehicles
Ñ ISO/DIS 22241-1, Diesel engines – NOx
reduction agent AUS 32 – Part 1: Quality
requirements
Ñ ISO/DIS 25116-3, Friction stir welding – Steel –
Part 3: Quality and inspection requirements
Ñ ISO/DIS 25335, Nondestructive testing –
Thermographic testing – Mechanical and elec-
trical equipment testing
Ñ ISO/IEC DIS 42105, Information technology
– Artificial intelligence – Guidance for human
oversight of AI systems
SCANNER
|
STANDARDSUPDATE
DEADLINE ALERT:
31 JANUARY 2026
The ASNT Foundation offers financial
assistance and recognition to indi-
viduals seeking nondestructive
testing (NDT) training, as well
as undergraduate and graduate
students and faculty members of
universities and colleges. Discover
a range of opportunities tailored
to your educational pursuits. The
scholarships, grants, and fellow-
ships are available to candidates
worldwide and have their own
eligibility criteria that must be met
in order to be considered. Visit
foundation.asnt.org to learn more
about the eligibility criteria and to
apply.
|
ASNTFOUNDATION
24
M AT E R I A L S E V A L U AT I O N • J A N U A R Y 2 0 2 6
